Shop

The FP 10000Q is the flagship four-channel model in the FP+ Series. At the core of the FP 10000Q’s performance is the now proven technological milestone that is LAB GRUPPEN’s patented Class TD® output stage, an amplifier topology that approaches the exceptional efficiency of Class D while retaining the sonic purity of proven Class B designs. Further contributing to the remarkable efficiency of the FP 10000Q is a Regulated Switch Mode Power Supply (R.SMPS™), which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage. A highly refined and updated circuit layout optimizes the interaction of R.SMPS and Class TD to produce the extraordinary power density of the FP 10000Q.

• Ultra-efficient, dual mono Class D power amplifier with a pair of 8” custom-designed dual-cone woofers to deliver articulate acoustic sound reproduction with both punch and high end clarity
• Place on the floor it has a minimal stage footprint and can be placed on its side feet for tonal variation or mounted on a speaker stand for maximum projection
• 2 independent channels take XLR or Jack inputs, 3-band EQ, ‘Shape’ control for optimization; connection of a mic and instrument or two acoustic instruments, and AUX input for backing tracks
• Levels can be adjusted by holding down the Chorus switch and turning the Reverb control pot; the chorus level is stored and will even be recalled at the next switch on
• Anti-Feedback button can automatically scan for and eliminate unwanted feedback. Phase switch to remove destructive interference when a player is too close to the amplifier

The passionate acoustic player who needs an amp that is versatile, compact and powerful, whilst being sympathetic, detailed and delicate, just like an acoustic guitar. Your Guitar, your amp, your tone. The A1 delivers an amplified acoustic performance to match the tone and dynamics of the top-quality acoustic instruments on the market today.

The CUB12R houses a 12" driver, giving it an increased volume and full rich valve tone. Looking at the preamp it's clear that the CUB12R packs more into the amp than it's smaller siblings. It features Gain, Treble, Middle, Bass, Volume, Tone and Reverb controls. The output section of the CUB12R is based around a pair of EL84 tubes giving it a more scooped tone than it's smaller counterparts. Think smooth rich overdrive with bags of gain.

The CUB12R features two input sockets one-labeled 15W the other labeled less than one watt. Plug into the "less than one watt" and you get your great tube tone at a whisper. The less-than-one-watt option allows you to drive the power amp section really hard allowing you to really access the "dark art" tone of power amp distortion.

The CUB12R is a member of the CUB range which offers everyone the opportunity to experience the sound and feel of a good quality tube amp at what is an amazing price.

2 x EL84 power tubes combine with 3 x ECC83/12AX7 pre-amp tubes to deliver 15W RMS power with natural drive and warmth. Opt for either the full 15 watts RMS power or <1W power. <1W is ideal for recording and practice without sacrificing tone; 15W allows for stage-ready volume levels. HH custom-designed 12” drivers with open-back cabinet speakers for dynamic, responsive interaction with tube amplifier; integrated tilt stand under the cabinet enhances projection and tonal variation. Independent Gain and Volume control allows preamp drive to be balanced with the output level, progressing from warm cleans to rich overdrives. 3-band tone stack with Bass, Middle and Treble controls; ‘Tone’ control the overall top-end response, reduce upper-end harmonics on the output and pre-amplifier overdrive.

The IRT-Studio-SE offers the same classic tones as the big Ironheart amps, but in a low-power, compact, and lightweight design. Equipped with ECC83 Preamp valves and EL84 output valves, the IRT-Studio amp delivers 15W of pure tonal power, with the option to switch to less than 1W via the second input for times when loud volumes aren’t permitted. Even with is compact design, the amp head still offers 3 channels and a wide range of control to dial in the perfect tone for any situation. Its 3 band EQ features push/pull EQ shift functions, extended the frequency ranges for further tone shaping, while the dynamics, tone, and reverb controls allow players to give their sound a personal touch.

Along with its incredible tonal capabilities, the Ironheart Studio features a variety of ins/outs to seamlessly integrate into existing rigs. Its D.I. output is perfect for directly connecting the amp head to DAWs, PAs, and mixing consoles, and features a high-quality speaker emulator to deliver all valve tones to your DAW or PA, or even both at the same time. The amp is also equipped with an internal dummy load, removing the need to connect an external speaker and deliver a truly silent recording. The FX loop is idea for connecting your favourite stompboxes, and the Aux in is perfect for playing along to backing tracks and songs.

The Laney Ironheart IRT120H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It's loaded with four premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone.

One of the coolest features of the IRT120H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You'll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.