Description

Versatile and Durable Workhorse Engineered to Satisfy All But the Most Power-Hungry Needs. The versatile FP 7000 supplies power output (2 × 3500 W at 2 ohms) well matched to a wide variety of applications. At the core of the FP 7000’s performance is a breakthrough advance in LAB GRUPPEN’s patented Class TD® output stage, an amplifier topology that approaches the exceptional efficiency of Class D while retaining the sonic purity of proven Class B designs. Further contributing to the remarkable efficiency of the FP 7000 is a Regulated Switch Mode Power Supply (R.SMPS™), which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage. A highly refined and updated circuit layout optimizes the interaction of R.SMPS and Class TD to produce the excellent power density of the FP 7000.

 

Features

  • 7,000 Watt, 2-channel amplifier with up to 3,500 Watts output per channel and NomadLink network for monitoring and control
  • Selectable gain plus scalable Voltage Peak Limiter (VPL) and bridge-mode operation allow custom configuration for any application
  • 2 x 3,500 Watts into 2 Ohms, 2 x 2,800 Watts into 4 Ohms, 2 x 1,450 Watts into 8 Ohms, 2 x 730 Watts into 16 Ohms
  • Proven and reliable Class-TD output stage delivers Class-A/B audio quality with Class-D efficiency
  • Regulated Switch Mode Power Supply (R.SMPS) ensures constant power output at all times
  • Intuitive DeviceControl software monitors and controls key functions via the NomadLink network
  • Comprehensive protection scheme including current, voltage, DC, temperature, short circuit and open load warnings
  • Efficient Intercooler copper cooling system dissipates more heat for extended peak output
  • 2 x balanced analog audio inputs and 2 x link outputs on Neutrik XLR* connectors
  • 2 NL4 Neutrik speakON* output connectors
  • Removable dust filter grilles for increased air circulation
  • Rugged 2U rackmount chassis for durability in touring applications

 

Specifications

General
Number of amplifier channels

2

Peak total output all channels driven

7000 W

Peak output voltage per channel

155 V

Max output current per channel

59 A peak

Max output power (all channels driven)
2 ohms

3500 W

4 ohms

2800 W

8 ohms

1450 W

16 ohms

730 W

Max output power bridged
2 ohms

Not recommended 1

4 ohms

7000 W

8 ohms

5600 W

16 ohms

2900 W

Performance
THD 20 Hz – 20 kHz at 1 W

<0.1%

THD at 1 kHz and 1 dB below clipping

<0.05%

Signal to Noise Ratio

>112 dBA

Channel separation (Crosstalk) at 1 kHz

>70 dB

Input impedance

20 kOhm

Output impedance @ 100 Hz

19 mOhm

Gain, Sensitivity and Limiters
VPL, selectable per ch

155, 121, 101, 83, 70, 56, 47, 38 V

VPL, when bridged 2

310, 242, 202, 166, 140, 112, 94, 76 V

Voltage Peak Limiter mode (per ch.)

Hard / Soft

Amplifier gain selectable (all channels) – rear-panel switches 2

23, 26, 29, 32, 35, 38, 41, 44 dB

Default gain

35 dB

Level adjustment (per channel)

Front-panel potentiometer, 31 position detented from -inf to

Connectors and Buttons
Output connectors (per ch.)

Neutrik speakON

Input connectors (per ch.)

3-pin XLR, electronically balanced

Output bridge mode

A+B – Ch. A is signal input source. A+B, C+D – Ch.’s A and C are input source

NomadLink network

On board, 2 x RJ45 connectors IN and OUT

Intelligent fans (on/off)

Yes, depending on presence of output signal

Power on/off and Remote enable on/off

Individual switches on front-panel

Cooling

Dual fan, front to rear airflow, no filter required, temperature controlled speed

Front-panel user interface
Common

NomadLink Network; Power Average Limiter (PAL)4; Power on

Per channel

Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute

Power
Operating voltage, 230 V / 115 V nominal 3

130-265 V / 65 -135 V

Minimum power-up voltage, 230 V / 115 V

171 V / 85 V

Power Average Limiter (PAL) 4

Yes

Soft-start / Inrush Current Draw

Yes / max. 5 A

Mains connector

230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock

Dimensions
Dimensions

W: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”)

Weight
Weight

12 kg (26.4 lbs)

Finish
Finish

Black painted steel chassis with black painted steel / aluminum front

Approvals
Approvals

CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC

 

 

 

Additional information
Brand

Lab Gruppen

Reviews (0)
Ratings

0.0

0 Product Ratings
5
0
4
0
3
0
2
0
1
0

Review this product

Share your thoughts with other customers

Write a review

Reviews

There are no reviews yet.