Description

The DIN-AP4 is a secure, high performance control processor with a powerful 4-Series™ control engine designed specifically for DIN rail mounting applications. The DIN-AP4 is designed to integrate and automate technology within any modern networked home, commercial building, or government facility. DIN rail mounting provides a space efficient, cost effective, and modular solution for configuring complete automation systems using the DIN-AP4 along with additional Crestron and third?party DIN rail mountable devices.

 

Features

  • 4 Series™ control system with 1 GB SDRAM and 8 GB flash memory
  • Embedded 4 Series multicore CPU processor
  • iPhone®, iPad®, and Android™ device control app support
  • XPanel computer and web based control
  • Modular programming architecture
  • Onboard IR/serial, COM, I/O, relay, Cresnet® network, and Ethernet control ports
  • High-speed USB 2.0 host port and memory card slot
  • Crestron Fusion® software room monitoring and scheduling
  • XiO Cloud® service provisioning and management
  • Enterprise class network security and authentication
  • SNMP V3 remote IT management support
  • Native BACnet network/IP support
  • Installer setup via software, web browser, or cloud
  • IPv6 ready
  • Integrates with Apple® HomeKit® technology
  • Powered via 24 VDC power pack or PoE (Power over Ethernet)
  • 9M wide DIN rail mountable

Specifications

Control Engine
Crestron® 4-Series™; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs
Communications
Ethernet100 Mbps, auto switching, auto negotiating, auto discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1xX, SNMP, BACnet and IP1, IPv4 or IPv6, Active Directory® service authentication, HTTPS web server, HTTPS web browser setup and XiO Cloud® client, SMTP email client
Cresnet® NetworkCresnet master mode
USBSupports USB mass storage class devices via the front panel USB 2.0 host port, supports computer console via the front panel USB 2.0 device port
RS-232/422/485For 2-way device control and monitoring, supports RS-232, RS-422, or RS-485 up to 115.2k baud with hardware and software handshaking
IR/SerialSupports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
Memory
DDR3 SDRAM1GB
Flash8 GB
Memory CardSupports microSD® cards up to 32 GB
External StorageSupports USB storage devices up to 1 TB
Connectors and Card Slots
I/O 1–8(1) 9-pin 3.5 mm detachable terminal block;
Comprises (8) Versiport digital input/output or analog input ports (referenced to GND);
Digital Input: Rated for 0–24 VDC, input impedance 20k Ω, logic threshold >3.125 V low/0 and <1.875 V high/1;
Digital Output: 250 mA sink from maximum 24 VDC, catch diodes for use with real world loads;
Analog Input: Rated for 0–10 VDC, protected to 24 VDC maximum, input impedance 21k Ω with pull-up resistor disabled;
Programmable 5 V, 2k Ω pull-up resistor per pin
MEMORY(1) SD memory card slot;
Accepts one SD or SDHC card up to 32 GB for storage of log files
IR/SERIAL 1–4(1) 8-pin 3.5 mm detachable terminal block;
Comprises (4) IR output ports;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0–5 V) up to 115.2k baud;
IRP2 IR emitters sold separately
RELAYS 1–4(1) 8-pin 3.5 mm detachable terminal block;
Comprises (4) normally open, isolated relays;
Rated 1 A, 30 VAC/VDC;
MOV arc suppression across contacts
COMPUTER(1) USB Type B connector, female;
USB 2.0 computer console port;
For setup only
PWR(1) 2-pin 3.5 mm detachable terminal block;
24 VDC power input for power pack (sold separately)
NET(2) 4-pin 3.5 mm detachable terminal blocks, paralleled;
Cresnet master port
COM 1–2(2) 5-pin 3.5 mm detachable terminal blocks;
Bidirectional RS?232/422/485 port;
Up to 115.2k baud; hardware and software handshaking support
G(1) 6-32 screw;
Chassis ground lug
USB(1) USB Type A connector, female;
USB 2.0 port for storage devices
LAN PoE(1) 8-pin RJ-45 connector, female;
100BASE-T Ethernet port;
PoE (Power over Ethernet) PD (Powered Device) port
Controls and Indicators
PWR(1) Bicolor green/amber LED, indicates operating power is present;
Amber indicates that the device is booting and is not yet ready to operate;
Green indicates that the device is ready to operate
NET(1) Amber LED, indicates communication with Cresnet devices
MSG(1) Red LED, indicates processor has generated an error message
HW-R(1) Recessed miniature push button, initiates hardware reset
SW-R(1) Recessed miniature push button, initiates software reset
LAN(1) Green and (1) Amber LEDs;
Green LED indicates Ethernet link status and connection speed;
Amber LED indicates Ethernet activity
Power
Power Source OptionsPower pack (sold separately) or PoE
Power PackMust supply 24 VDC to 2-pin terminal block via flying leads;
Use model PW-2407WUL or equivalent
Power over EthernetIEEE 802.3at Type 1 (802.3af compatible) Class 0 (12.95 W) PoE Powered Device
Available Cresnet Power2.5 W maximum via PoE;
10 W maximum via 0.75 @ 24 VDC power pack
Power Consumption9.7 W (not including any connected Cresnet devices)
Environmental
Temperature41 to 113 °F (5 to 45 °C)
Humidity10% to 90% RH (noncondensing)
Heat Dissipation33 BTU/hr
Enclosure
Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 9 DIN module spaces (162 mm)
Dimensions
Height3.57 in (91 mm)
Width6.33 in (161 mm)
Depth2.28 in (58 mm)
Weight
9.8 oz (277 g)
Compliance
Regulatory Model: DIN-AP4;
UL® Listed for US & Canada, CE, IC, FCC Part 15 Class B digital device

T4S0M2E4/17-KTNVA

Reviews (0)
Ratings

0.0

0 Product Ratings
5
0
4
0
3
0
2
0
1
0

Review this product

Share your thoughts with other customers

Write a review

Reviews

There are no reviews yet.