No products in the cart.
The Audio-Technica AT-XP7 is a high-performance turntable needle designed for DJs and vinyl enthusiasts. Featuring a durable elliptical stylus, it delivers exceptional tracking, reduced wear, and accurate sound reproduction. Ideal for mixing and casual listening, the AT-XP7 ensures superior performance and long-lasting reliability.Audio Technica – AT-XP7 Turntables Needles
AED 570.00 Exc VATAED 570.00 Exc VAT Add to cart- This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge's special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance Housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws - no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable at-vmn95 Replacement styli.
Audio Technica AT-VM95C Turntables Needles
AED 190.00 Exc VATAED 190.00 Exc VAT Add to cart - The AT-VM95C/H combo kit includes the AT-VM95C dual moving magnet cartridge premounted on the AT-HS6BK headshell.This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation & low distortion for outstanding tonal quality. The durable housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws.
Audio Technica AT-VM95C/H Turntables Needles
AED 284.76 Exc VATAED 284.76 Exc VAT Add to cart - The Audio-Technica Consumer AT-VM95E Dual Moving Magnet Cartridge features a special coil design, which delivers a powerful output level (4.0 mV) with high channel separation and low distortion for remarkable tonal quality. The cartridge can be mounted to a standard 1/2" mount and features integrated threaded inserts, allowing it to be mounted with just two screws (no nuts required). All VM95 Series share the same body, allowing the stylus to be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Audio Technica AT-VM95E Turntables Needles
AED 256.19 Exc VATAED 256.19 Exc VAT Add to cart The Audio-Technica Consumer AT-XP3 is specially designed for the needs of professional DJs and features a highly rigid polyphenylene sulfide (PPS) / glass fiber body with a tracking force of 2 to 4 grams. The AT-XP3 offers an output level of 5.5mV, while the 0.6mm conical bonded stylus tracks the center of the record groove for reliable performance and high-quality audio reproduction. Additionally, the cartridge is specifically designed to provide maximum visibility of the stylus tip.
Audio Technica AT-XP3 Turntables Needles
AED 237.14 Exc VATAED 237.14 Exc VAT Add to cartThe Audio-Technica Consumer AT-XP5 is a specially designed for the needs of professional DJs and features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body with a tracking force of 2 to 4 grams. The AT-XP5 offers an output level of 5.5mV, while the 0.3 x 0.7 elliptical bonded stylus tracks the record groove with high accuracy for high-quality audio reproduction. Additionally, the cartridge is specifically designed to provide maximum visibility of the stylus tip.
Audio Technica AT-XP5 Turntables Needles
AED 380.00 Exc VATAED 380.00 Exc VAT Add to cart- The AT-VM95E/H combo kit includes the AT-VM95E dual moving magnet cartridge premounted on the AT-HS6BK headshell.This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Audio Technica AT-VM95E/H Turntables Needles
AED 332.38 Exc VATAED 332.38 Exc VAT Add to cart - This VM95 Series cartridge with 2.7 x 0.26 mil Shibata stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Audio Technica AT-VM95S Dual Moving Magnet Cartridge
AED 760.95 Exc VATAED 760.95 Exc VAT Add to cart The AT-VM95SH/H combo kit includes the AT-VM95SH dual moving magnet cartridge premounted on the AT-HS6BK headshell.
Audio Technica AT-VM95SH
AED 922.86 Exc VATAED 922.86 Exc VAT Add to cartThe Audio-Technica Consumer AT-VM95EN Dual Moving Magnet Cartridge offers high channel separation and low distortion for remarkable tonal quality. The cartridge can be mounted to a standard 1/2" mount and features integrated threaded inserts, allowing it to be mounted with just two screws (no nuts required). All VM95 Series share the same body, allowing the stylus to be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Audio-Technica Consumer AT-VM95EN Dual Moving Magnet Cartridge
AED 513.33 Exc VATAED 513.33 Exc VAT Add to cartThe Audio-Technica Consumer AT-VMN95C is a 0.6 mil conical replacement stylus for the AT-VM95C dual moving magnet cartridge. The bonded round shank features an aluminum pipe cantilever. The conical stylus has a spherical tip, which normally touches the center of the record groove walls. This design is well suited for older players with higher tonearm tracking forces.
Audio-Technica Consumer AT-VMN95C Replacement Stylus
AED 94.29 Exc VATAED 94.29 Exc VAT Add to cart- The AT-XP5/H Headshell and Cartridge Combo Kit from Audio-Technica includes the AT-XP5 DJ cartridge pre-mounted on the AT-HS6BK headshell. It can be used to deliver the ultimate performance potential of any record playing system. This kit offers tonal balance, response range, clarity on musical peaks, stereo separation and imaging, and freedom from noise and distortion.The elliptical bonded stylus tip has two radii, the front radius being wider than the side radius. This allows the stylus to ride in the center of the groove, while the smaller side radius can more accurately track higher frequencies.
Audio-Technica Consumer AT-XP5/H Headshell and Cartridge Combo Kit
AED 475.24 Exc VATAED 475.24 Exc VAT Add to cart - The ATN95E Elliptical Diamond Stylus from Audio-Technica is a replacement stylus for the AT95E Dual Magnet Phonograph Cartridge. It tracks record grooves with high accuracy for superior audio reproduction.
Audio-Technica Consumer ATN95E Replacement Elliptical Diamond Stylus for AT95E Dual Magnet Cartridge
AED 141.90 Exc VATAED 141.90 Exc VAT Add to cart - The red Elliptical Diamond Replacement Stylus from Audio-Technica features a bonded round shank. It is designed for use with AT95EX Dual Moving Magnet Stereo Cartridge.
Audio-Technica Consumer Elliptical Diamond Replacement Stylus for AT95EX Cartridge (Red)
AED 160.95 Exc VATAED 160.95 Exc VAT Add to cart - Styled in a smoked-clear finish to preserve visibility, the Decksaver Cover for Pioneer CDJ-3000 is made from durable polycarbonate. It is intended for use with the Pioneer CDJ-3000 media player, offering protection from dust, liquid, and accidental impact. It fits handily into CDJ cases and can accommodate compatible cables. In keeping your CDJ's faders, platter, and sliders unperturbed by the elements, you'll find this cover useful at home, on the road, or at any gig.
Decksaver Cover for Pioneer CDJ-3000 (Smoked Clear)
AED 465.71 Exc VATAED 465.71 Exc VAT Add to cart - It’s clear that Pioneer DJ has once again raised the bar yet again with their latest DJ controller: the DDJ-FLX10. This versatile piece of equipment, boasts exceptional sound quality and an array of features that cater to the needs of both professional and amateur DJs.With a layout that emulates a professional DJ setup, the DDJ-FLX10 features a 4-channel mixer and full-size jog wheels that provide a tactile and responsive feel, making it easy to scratch and manipulate tracks. It also comes equipped with a variety of input and output options, including XLR, RCA, and TRS connectors, as well as a built-in sound card that delivers high-quality audio processing.
Decksaver Pioneer DJ DDJ-FLX10 cover
AED 332.38 Exc VATAED 332.38 Exc VAT Add to cart - It’s clear that Pioneer DJ has once again raised the bar yet again with their latest DJ controller: the DDJ-FLX10. This versatile piece of equipment, boasts exceptional sound quality and an array of features that cater to the needs of both professional and amateur DJs.With a layout that emulates a professional DJ setup, the DDJ-FLX10 features a 4-channel mixer and full-size jog wheels that provide a tactile and responsive feel, making it easy to scratch and manipulate tracks. It also comes equipped with a variety of input and output options, including XLR, RCA, and TRS connectors, as well as a built-in sound card that delivers high-quality audio processing.
Decksaver Pioneer DJ DDJ-FLX10 cover
AED 332.38 Exc VATAED 332.38 Exc VAT Add to cart - Protect the precious faders, switches, and knobs on your Pioneer DJ DJM-A9 mixer with the DJM-A9 Cover from Decksaver, an ultra-durable cover that fits tightly over the DJM-A9 mixer while still leaving cables and connectors, as well as rear-panel switches and knobs, completely available. This cover fully shields delicate external and internal components, including pads and jog wheels, from dust, liquids, and impacts with its extremely tough polycarbonate shell. Like all Decksaver covers, this cover features a smoked/clear transparency, so you can still keep an eye on your device.
Decksaver Pioneer DJ DJM-A9 Cover
AED 437.14 Exc VATAED 437.14 Exc VAT Add to cart If your are a travelling DJ or musician, the Adjustable Laptop/Controller Stand from Gravity Stands may be just for you. This portable stand provides stable support for either a 12 to 17" laptop or a controller such as Launchpad, Machine, or Push 2. It is robust yet lightweight and easy to transport, and folds down to a compact bundle in seconds. Securely locking eccentric clamps facilitate rapid tilt adjustment and locking of the non-slip rubber-coated shelf and base for optimal ergonomics.
Gravity GLTS01B Adjustable Laptop and Controller Stand
AED 427.62 Exc VATAED 427.62 Exc VAT Add to cartThe 2M 78 features an improved engine, which provides a high level of sonic accuracy. The stylus' tip is a Spherical diamond that is perfect for playback of 78 rpm shellac records, which require a larger stylus profile. The cartridge body is manufactured from Hopelex, which ensures high rigidity while eliminating unwanted resonances.
2M 78 uses a strapped output to deliver the same output signal from both sets of pole pins. This effectively eliminates the need for mono-specific equipment, making it possible to enjoy true mono reproduction on any stereo playback system.
The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.
Ortofon 2M 78 Ortofon 2M 78 true mono cartridge
AED 475.00 Exc VATAED 475.00 Exc VAT Add to cart- The flagship Ortofon 2M Black utilizes a Shibata stylus (usually not found on cartridges any where near this price). With a heavily upgraded generator and a proprietary body material, the 2M Black is exceedingly fast, detailed yet supremely musical. An excellent value and has earned our highest recommendation!“The 2M Red is the entry level and 2M Black is the flagship. The 2M Black has a light, fast touch with good treble extension. Its greatest attribute is the way it provides a more transparent window on the world of micro-energies, permitting it to plumb the depths of soundstaging and dimensionality. Their performance is a fitting tribute to Ortofon and chief engineer Per Windfield!”The 2M series of cartridges feature Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have flat frequency response, just like a moving coil cartridge. Ortofon invented the Split pole pin technology and was originally offered in the 500 series and Super OM series.
Ortofon 2M Black Turntable Needles
AED 2,399.05 Exc VATAED 2,399.05 Exc VAT Add to cart - The 2M headshell is a practical and elegant solution for our customers who wish direct and easy mounting and replacement on their tonearm. The combination of 2M Headshell and 2M Series cartridge adds unique distinction to the turntable!Features: - Universal mount fitting a wide range of tonearms. - Weight with a 2M cartridge pre-mounted 23g. NB: please check the applicable for the tonearm cartridge and headshell weight range and use the auxiliary weight if needed. On Technics models it is vital to use the auxiliary weight. - The headshell body is manufactured from a special compound used for Medical industry, ensures high rigidity while reducing unwanted vibration - Elegant hi-tech design - Length 52mm. Headshell with a 2M cartridge pre-mounted provides correct Baerwald alignment with Ortofon TA-110/ TA-210 tonearms, likewise with the major part of tonearms with universal mountNB: available only with a 2M cartridge pre-mounted on the headshell.
Ortofon 2M Blue PNP Turntable Needles
AED 903.81 Exc VATAED 903.81 Exc VAT Add to cart - AED 599.05 Exc VAT Add to cart
- The 2M Blue features an improved engine, which provides an increased output of 5.5 mV and an optimized sound reproduction and a high level of sonic accuracy.The stylus features a Nude Elliptical diamond and split pole pins with a copper wire. The cartridge body is manufactured from Hopelex which ensures high rigidity while eliminating unwanted resonances.The 2M Blue adds more dynamics and resolution, more openness and reproduces more details compared to the 2M Red.Included with 2M Blue:
- Stylus Brush
- Screwdriver
- Screw M2.5 x 5
- Screw M2.5 x 7
2M Blue Technical data
Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV Channel balance at 1 kHz - 1.5 dB Channel separation at 1 kHz - 25 dB Channel separation at 15 kHz - 15 dB Frequency range at - 3dB - 20-25.000 Hz Frequency response - 20-20.000 Hz + 2 / - 1 dB Tracking ability at 315Hz at recommended tracking force - 80 µm Compliance, dynamic, lateral - 20 µm/mN Stylus type - Nude Elliptical Stylus tip radius - r/R 8/18 µm Tracking force range - 1.6-2.0 g (16-20 mN) Tracking force, recommended - 1.8 g (18 mN) Tracking angle - 20° Internal impedance, DC resistance - 1.3 kOhm Internal inductance - 700 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 150-300 pF Cartridge colour, body/stylus - Black/Blue Cartridge weight - 7.2 g 2M PnP MkII cartridge with integrated headshell weight - 20 g 2M PnP MkII cartridge with integrated headshell length - 52 mmReplacement stylus unit - 2M Blue (interchangeable with 2M Red and 2M Silver)2M Series styli interchangeability: The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations: - 2M Red, 2M Blue and 2M Silver - 2M Bronze and 2M Black - 2M Mono and 2M 78Ortofon 2M Blue Turntable Needles
AED 903.81 Exc VATAED 903.81 Exc VAT Add to cart - The 2M Bronze features a Nude Fine Line diamond stylus, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners. Additionally, its larger footprint ensures reduced distortion and record wear.
Ortofon 2M Bronze Turntable Needles
AED 1,503.81 Exc VATAED 1,503.81 Exc VAT Add to cart The 2M Series of cartridges is designed for precise and accurate retrieval of the information in the record groove. Ortofon's philosophy is to play the record sound as accurate as possible without coloring the sound. The name 2M was selected from several ideas. Ortofon wanted a modern name that would be easy to pronounce and remember and therefore an alphanumerical name was chosen.
Ortofon 2M Red PNP Turntable Needles
AED 503.81 Exc VATAED 503.81 Exc VAT Add to cart- The Ortofon 2M Red Stylus is an optional replacement for your existing Ortofon 2M Red or 2M Blue cartridge. It features a Tipped Elliptical stylus profile.You should upgrade your stylus when it starts to collect a lot of dust after each playback or when you notice some distortion and channel separation during listening.
Ortofon 2M Red STYLUS Turntable Needles
AED 303.81 Exc VATAED 303.81 Exc VAT Add to cart - The 2M Red features an improved engine, which provides an increased output of 5.5 mV and an optimized sound reproduction and a high level of sonic accuracy
Ortofon 2M Red Turntable Needles
AED 399.05 Exc VATAED 399.05 Exc VAT Add to cart - The Cadenza Bronze model is using a Replicant 100 stylus and a conical aluminium cantilever. The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire. Field Stabilizing Element/FSE, is used for optimal linearity especially during complex crescendo passages.
Ortofon Cadenza Bronze Turntable Needles
AED 6,189.52 Exc VATAED 6,189.52 Exc VAT Add to cart - Designed to commemorate the release of the limited edition Technics SL-1200LTD and SL-1200GLD, the Concorde Gold was made to compliment the attractive stylings of these limited edition turntables and to provide the best possible sound quality available in a DJ cartridge. Compatible to a very wide range of turntables.
Ortofon Concorde Gold Turntable Needles
AED 703.81 Exc VATAED 703.81 Exc VAT Add to cart - The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.
Ortofon Concorde MKII Club Turntable Needles
AED 541.00 Exc VATAED 541.00 Exc VAT Add to cart - • At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl. • This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal. • Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.
Ortofon Concorde MKII Digital Turntable Needles
AED 465.71 Exc VATAED 465.71 Exc VAT Add to cart - The Concorde DJ is considered the jack-of-all-trades, boasting accurate sound reproduction and excellent groove handling.
Ortofon Concorde MKII DJ Turntable Needles
AED 399.00 Exc VATAED 399.00 Exc VAT Add to cart - Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well. It offers both reasonable output, high sound quality, and good tracking ability for virtually any style of music.
Ortofon Concorde MKII Mix Turntable Needles
AED 322.00 Exc VATAED 322.00 Exc VAT Add to cart - The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching. For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
Ortofon Concorde MKII Scratch Turntable Needles
AED 427.00 Exc VATAED 427.00 Exc VAT Add to cart - The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club. The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.
Ortofon Concorde MKII Twin Club Turntable Needles
AED 1,046.00 Exc VATAED 1,046.00 Exc VAT Add to cart - At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl. This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal. Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.
Ortofon Concorde MKII Twin Digital Turntable Needles
AED 903.81 Exc VATAED 903.81 Exc VAT Add to cart - The Concorde DJ is considered the jack-of-all-trades, boasting accurate sound reproduction and excellent groove handling.
Ortofon Concorde MKII Twin DJ Turntable Needles
AED 760.00 Exc VATAED 760.00 Exc VAT Add to cart - Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well. It offers both reasonable output, high sound quality and a good tracking ability for virtually any style of music. With transparent sound across the spectrum and excellent handling ability, the MIX represents one of the longest running values in DJ cartridges.
Ortofon Concorde MKII Twin Mix Turntable Needles
AED 618.00 Exc VATAED 618.00 Exc VAT Add to cart - The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.
Ortofon Concorde MKII Twin Scratch Turntable Needles
AED 827.00 Exc VATAED 827.00 Exc VAT Add to cart The flagship Ortofon 2M Black utilizes a Shibata stylus (usually not found on cartridges any where near this price). With a heavily upgraded generator and a proprietary body material, the 2M Black is exceedingly fast, detailed yet supremely musical. An excellent value and has earned our highest recommendation!
“The 2M Red is the entry level and 2M Black is the flagship. The 2M Black has a light, fast touch with good treble extension. Its greatest attribute is the way it provides a more transparent window on the world of micro-energies, permitting it to plumb the depths of soundstaging and dimensionality. Their performance is a fitting tribute to Ortofon and chief engineer Per Windfield!”
- Neil Gader, The Absolute Sound, Product of Year Award Issue, January 2009The 2M series of cartridges feature Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have flat frequency response, just like a moving coil cartridge. Ortofon invented the Split pole pin technology and was originally offered in the 500 series and Super OM series.
The 2M series was developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award-winning MC Jubilee and very successful Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality.The 2M series is designed for precise and accurate retrieval of the information in the record groove. Ortofon's philosophy is to make cartridges which reproduce the record grooves as accurately as possible, without coloring the sound. The 2M series design has been optimized for ease of mounting and their weight and size fit virtually any current turntable.
Specifications:
- Output voltage at 1000 Hz, 5cm/sec. 5 mV
- Channel balance at 1 kHz 1 dB
- Channel separation at 1 kHz 26 dB
- Channel separation at 15 kHz 15 dB
- Frequency range at - 3dB 20-31.000 Hz
- Frequency response 20-20.000 + 2 / - 0 dB
- Tracking ability at 315Hz at recommended tracking force 80 µm
- Compliance, dynamic, lateral 22 µm/mN
- Stylus type Nude Shibata
- Stylus tip radius r/R 6/50 µm
- Tracking force range 1.4-1.7g (14-17 mN)
- Tracking force, recommended 1.5 g (15 mN)
- Tracking angle 20°
- Internal impedance, DC resistance 1.2 kOhm
- Internal inductance 630 mH
- Recommended load resistance 47 kOhm
- Recommended load capacitance 150-300 pF
- Cartridge colour, body/stylus Black/Black
- Cartridge weight 7.2 g
- Replacement stylus unit 2M Black
Ortofon Concorde Serato S-120 Turntable Needles
AED 419.00 Exc VATAED 419.00 Exc VAT Add to cartOrtofon-Serato headshell fits any standard DJ turntable connection.
Ortofon Headshell – Serato Turntable Needles
AED 141.00 Exc VATAED 141.00 Exc VAT Add to cartThis black Ortofon Headshell will accomodate most DJ cartridges but is particularly useful for mounting the Ortofon OM series cartridges onto turntables. The headshell features a black finish that complements their Nightclub, Nightclub II, and Pro S model cartridges.
Ortofon Headshell – SH-4BK Black Turntable Needles
AED 139.00 Exc VATAED 139.00 Exc VAT Add to cartThis blue Ortofon Headshell will accomodate most DJ cartridges but is particularly useful for mounting the Ortofon OM series cartridges onto turntables. The headshell features a black finish that compliments their Nightclub, Nightclub II and Pro S model cartridges.
Ortofon Headshell – SH-4BL Blue Turntable Needles
AED 139.00 Exc VATAED 139.00 Exc VAT Add to cart- AED 3,303.00 Exc VAT Add to cart
- REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge. Adjusting the height of your Rega tonearm is easy It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play. 3.2 - 4 mm spacers should be enough for Quintet cartridge.
Ortofon MC Quintet Blue Turntable Needles
AED 1,703.00 Exc VATAED 1,703.00 Exc VAT Add to cart - REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge. Adjusting the height of your Rega tonearm is easy. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play. 3.2 - 4 mm spacers should be enough for Quintet cartridge.
Ortofon MC Quintet Bronze Turntable Needles
AED 2,503.00 Exc VATAED 2,503.00 Exc VAT Add to cart - REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge. Adjusting the height of your Rega tonearm is easy. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play. 3.2 - 4 mm spacers should be enough for Quintet cartridge.
Ortofon MC Quintet Red Turntable Needles
AED 1,199.00 Exc VATAED 1,199.00 Exc VAT Add to cart