Compare“SOUNDBOKS 4 Portable Bluetooth Party Speaker (Black)” has been added to the compare list
The black NuQ62 2-Way 6.5" Full-Range Loudspeaker for Portable PA Applications from Turbosound is a compact passive 600W 6.5" loudspeaker system ideally suited for a wide range of speech and music sound-reinforcement applications. It is engineered to provide optimal performance for front fill, down fill, balcony delay and monitor applications. The NuQ62 loudspeaker features a 6.5" low-frequency driver with a low-mass voice coil for improved transient response, and an aluminum dome 1" neodymium motor high-frequency compression driver mounted on a rotatable 100 x 60° (horizontal x vertical) dispersion-converging elliptical waveguide. All drivers are matched with an internal passive-crossover network in a reflex-loaded enclosure. The rear-panel connector plate carries Neutrik speakON NL4 connectors for input and link connections to additional enclosures.
The NuQ62-FY is a matt black, powder coated flying yoke specifically designed to hang the NuQ62 in standalone applications, such as ceiling mounting in bars or clubs, or as an under-balcony fill. The NuQ62-FY consists of a Fly Yoke that attaches to the loudspeaker via the included screws, which are fully tightened after the enclosure has been adjusted for the desired coverage.
The NuQ62-SB is a matt black, powder coated swivel bracket specifically designed to hang the NuQ62 in standalone applications, such as ceiling mounting in bars or clubs, or as an under-balcony fill. The NuQ62-SB consists of: a pair of brackets that mount to the bottom and top of the loudspeaker; and a swivel bracket that fits onto the brackets. The screws can be tightened once the loudspeaker has been angled to achieve the desired coverage.
The white NuQ62-WH 2-Way 6.5" Full-Range Loudspeaker for Portable PA Applications from Turbosound is a compact passive 600W 6.5" loudspeaker system ideally suited for a wide range of speech and music sound-reinforcement applications. It is engineered to provide optimal performance for front fill, down fill, balcony delay and monitor applications. The NuQ62-WH loudspeaker features a 6.5" low-frequency driver with a low-mass voice coil for improved transient response, and an aluminum dome 1" neodymium motor high-frequency compression driver mounted on a rotatable 100 x 60° (horizontal x vertical) dispersion-converging elliptical waveguide. All drivers are matched with an internal passive-crossover network in a reflex-loaded enclosure. The rear-panel connector plate carries Neutrik speakON NL4 connectors for input and link connections to additional enclosures.
The black NuQ82 2-Way 8" Full-Range Loudspeaker for Portable PA Applications from Turbosound is a switchable passive/bi-amp 1000W loudspeaker system ideally suited for a wide range of speech and music sound-reinforcement applications. The NuQ82 Loudspeaker is engineered to provide optimal performance for FOH, sidefill, and delay-line loudspeakers, and is an ideal choice for wedge-monitoring applications.
The black NuQ82-AN 600W 2-Way 8" Full-Range Powered Loudspeaker from Turbosound is ideally suited for a wide range of portable and fixed-installation speech-and-music sound-reinforcement applications. Designed to work individually without a controller, the NuQ82-AN Loudspeaker provides optimal performance for FOH, sidefill, and delay-line loudspeakers, and is an ideal choice for wedge monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications.
The white NuQ82-AN-WH 600W 2-Way 8" Full-Range Powered Loudspeaker from Turbosound is ideally suited for a wide range of portable and fixed-installation speech-and-music sound-reinforcement applications. Designed to work individually without a controller, the NuQ82-AN-WH Loudspeaker provides optimal performance for FOH, sidefill, and delay-line loudspeakers, and is an ideal choice for wedge monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications.
The NuQ82-EB is a matt black, powder coated extension bracket specifically designed to hang two NuQ82 loudspeakers from a single NuQ82-SB in standalone applications, such as ceiling mounting in bars or clubs, or as an under-balcony fill. The NuQ82-EB consists of a pair of extension brackets which allow a NuQ82-SB swivel bracket to mount two NuQ82 loudspeakers. Once the enclosures have been adjusted for the desired coverage, the screws are tightened to maintain that angle.
The NuQ82-FY is a matt black, powder coated flying yoke specifically designed to hang the NuQ82 in standalone applications, such as ceiling mounting in bars or clubs, or as an under-balcony fill. The NuQ82-FY consists of: a fly yoke; a pair of side plates, which attach to the sides of the loudspeaker; and a pair of plastic handle screws that secure the fly yoke to the side plates. Once the enclosure has been adjusted for the desired coverage, the handle screws are tightened to maintain that angle.
The NuQ82-SB is a matt black, powder coated swivel bracket specifically designed to hang theÂ
NuQ82Â in standalone applications, such as ceiling mounting in bars or clubs, or as an under-balcony fill. The NuQ82-SB consists of: a swivel bracket, a swivel holder which is inserted into the loudspeaker pole socket, and a plastic handle screw that secures the swivel bracket to the top of the loudspeaker. Once the enclosure has been adjusted for the desired coverage, the included M4 screws are inserted to maintain that angle.
The NuQ82-SB is a matt black, powder coated swivel bracket specifically designed to hang theÂ
NuQ82Â in standalone applications, such as ceiling mounting in bars or clubs, or as an under-balcony fill. The NuQ82-SB consists of: a swivel bracket, a swivel holder which is inserted into the loudspeaker pole socket, and a plastic handle screw that secures the swivel bracket to the top of the loudspeaker. Once the enclosure has been adjusted for the desired coverage, the included M4 screws are inserted to maintain that angle.
The white NuQ82-WH 2-Way 8" Full-Range Loudspeaker for Portable PA Applications from Turbosound is a switchable passive/bi-amp 1000W loudspeaker system ideally suited for a wide range of speech and music sound-reinforcement applications. The NuQ82-WH Loudspeaker is engineered to provide optimal performance for FOH, sidefill, and delay-line loudspeakers, and is an ideal choice for wedge-monitoring applications.
The white NuQ82-WH 2-Way 8" Full-Range Loudspeaker for Portable PA Applications from Turbosound is a switchable passive/bi-amp 1000W loudspeaker system ideally suited for a wide range of speech and music sound-reinforcement applications. The NuQ82-WH Loudspeaker is engineered to provide optimal performance for FOH, sidefill, and delay-line loudspeakers, and is an ideal choice for wedge-monitoring applications.
The 2 way full range NuQ152-ANWH is a 2,500 Watt 15" powered loudspeaker system that is ideally suited for a wide range of portable and fixed installation speech and music sound reinforcement applications. Designed to work individually without a controller, the NuQ152-ANWH provides optimal performance for FOH, sidefill and delay line loudspeakers, and is an exceptional choice for wedge monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications.
Amplify your music at FOH performances with the single, black 12" Arrayable 2-Way Passive Loudspeaker from Turbosound. Designed to work in conjunction with LAKE DSP and LAB Gruppen, this loudspeaker is suitable for touring, portable, and installed sound reinforcement applications. It delivers 2400W peak power making it ideal for offstage fill, stereo in-fill, or distributed fill applications at a wide range of venues including nightclubs, concert halls, houses of worship, and more.
Amplify your music at FOH performances with the single, black 12" Arrayable 2-Way Passive Loudspeaker from Turbosound. Designed to work in conjunction with LAKE DSP and LAB Gruppen, this loudspeaker is suitable for touring, portable, and installed sound reinforcement applications. It delivers 2400W peak power making it ideal for offstage fill, stereo in-fill, or distributed fill applications at a wide range of venues including nightclubs, concert halls, houses of worship, and more.
The BERLIN TBV123-AN 2-Way 12" Constant Curvature Loudspeaker from Turbosound is an arrayable 2500W 12" powered loudspeaker system that is suitable for touring, portable, and installed sound reinforcement applications. Designed to work individually without a controller, the TBV123-AN provides optimal performance for FOH, offstage fill, stereo in-fill, or distributed fill applications in a wide range of venues including nightclubs, concert halls, houses of worship, and more.
The BERLIN TBV123-AN 2-Way 12" Constant Curvature Loudspeaker from Turbosound is an arrayable 2500W 12" powered loudspeaker system that is suitable for touring, portable, and installed sound reinforcement applications. Designed to work individually without a controller, the TBV123-AN provides optimal performance for FOH, offstage fill, stereo in-fill, or distributed fill applications in a wide range of venues including nightclubs, concert halls, houses of worship, and more.
The Turbosound TBV123-FB is a fly bar designed to safely suspend or ground stack TBV123 constant curvature line arrays and TVB118L subwoofers. The fly bar can suspend up to four TBV123 elements or two TBV118L subwoofers in unique arrays, or one subwoofer and two elements in a mixed array with a safety factor of 10:1. The fly bar is secured to the uppermost speaker enclosure using the supplied drop links and rigging pins, with additional enclosures attaching in a similar manner below in succession. The Turbosound TBV123-FB ships with mounting hardware for quick and easy installation.
The TBV123-RC2 road case for up to 2 TBV123 line array elements is designed to withstand the rigours of live concert touring. It is constructed from 12 mm rigid plywood with 40 x 40 mm durable aluminium edging extrusions. High density foam provides internal support and superior protection in transit, night after night, city after city. The TBV123-RC2 features premium plated steel hardware: lockable castors with rubber tyres, durable handles and locking butterfly catches for a long working life.
AED 3,343.00 Exc VATThe TBV123-RC2 road case for up to 2 TBV123 line array elements is designed to withstand the rigours of live concert touring. It is constructed from 12 mm rigid plywood with 40 x 40 mm durable aluminium edging extrusions. High density foam provides internal support and superior protection in transit, night after night, city after city. The TBV123-RC2 features premium plated steel hardware: lockable castors with rubber tyres, durable handles and locking butterfly catches for a long working life.
AED 3,343.00 Exc VATThe DUBLIN TCX152 is a 1,400 Watt compact 15" passive two way loudspeaker that is ideally suited for a wide range of portable or installed speech and music sound reinforcement applications. TCX152 consists of a trapezoidal enclosure housing a high excursion 15" reflex-loaded low frequency driver with low mass voice coil for improved transient response, and a 1" high temperature dome compression driver mounted on a rotatable converging elliptical waveguide, which provides a 90° horizontal by 60° vertical dispersion pattern.
The DUBLIN TCX152 is a 1,400 Watt compact 15" passive two way loudspeaker that is ideally suited for a wide range of portable or installed speech and music sound reinforcement applications. TCX152 consists of a trapezoidal enclosure housing a high excursion 15" reflex-loaded low frequency driver with low mass voice coil for improved transient response, and a 1" high temperature dome compression driver mounted on a rotatable converging elliptical waveguide, which provides a 90° horizontal by 60° vertical dispersion pattern.
The Turbosound Flashline TFM122M Coaxial 2-Way 12" Stage Monitor is a compact 1400W switchable passive/bi-amped floor monitor consisting of a coaxial carbon fiber-loaded 12" neodymium low-frequency and titanium dome 1" neodymium high-frequency combination driver in a reflex-loaded enclosure designed for concert touring. The coaxial drive unit is matched with an exponential horn flare for improved acoustic loading and controlled coverage. Both HF and LF coils utilize the same neodymium magnet assembly, which gives better efficiency and reduced weight. This allows the creation of a minimal-footprint monitor wedge, which combined with a 35° projection angle and 60 x 40° (H x V) dispersion pattern, is suitable as a vocal monitor on smaller stages where space is limited, while its low profile maximizes audience sightlines.
The Turbosound Flashline TFM122M Coaxial 2-Way 12" Stage Monitor is a compact 1400W switchable passive/bi-amped floor monitor consisting of a coaxial carbon fiber-loaded 12" neodymium low-frequency and titanium dome 1" neodymium high-frequency combination driver in a reflex-loaded enclosure designed for concert touring. The coaxial drive unit is matched with an exponential horn flare for improved acoustic loading and controlled coverage. Both HF and LF coils utilize the same neodymium magnet assembly, which gives better efficiency and reduced weight. This allows the creation of a minimal-footprint monitor wedge, which combined with a 35° projection angle and 60 x 40° (H x V) dispersion pattern, is suitable as a vocal monitor on smaller stages where space is limited, while its low profile maximizes audience sightlines.
The 12" coaxial Turbosound TFM122M-AN Flashline Stage Monitor is a 2500W powered PA speaker that’s portable, versatile, and simple to use. It is designed for wedge monitoring applications, but can function as a main PA in a wide variety of positions, with a pair able to cover an audience up to 250. The onboard KLARK TEKNIK DSP processing, ULTRANET digital audio connectivity, an analog XLR-1/4" input / XLR thru, and LCD interface with easy-to-use presets help working presenters, musicians, instructors, performers, and A/V providers get powerful, clean, and clear sound quickly.
The 12" coaxial Turbosound TFM122M-AN Flashline Stage Monitor is a 2500W powered PA speaker that’s portable, versatile, and simple to use. It is designed for wedge monitoring applications, but can function as a main PA in a wide variety of positions, with a pair able to cover an audience up to 250. The onboard KLARK TEKNIK DSP processing, ULTRANET digital audio connectivity, an analog XLR-1/4" input / XLR thru, and LCD interface with easy-to-use presets help working presenters, musicians, instructors, performers, and A/V providers get powerful, clean, and clear sound quickly.
The Turbosound Flashline TFM152M Coaxial 2-Way 15" Stage Monitor is a compact 1600W switchable passive/bi-amped floor monitor consisting of a coaxial carbon fiber-loaded 15" neodymium low-frequency and titanium dome 1.4" neodymium high-frequency combination driver in a reflex-loaded enclosure designed for concert touring. The coaxial drive unit is matched with an exponential horn flare for improved acoustic loading and controlled coverage. Both HF and LF coils utilize the same neodymium magnet assembly, which gives better efficiency and reduced weight. This allows the creation of a minimal-footprint monitor wedge, which combined with a 35° projection angle and 60 x 40° (H x V) dispersion pattern, is suitable as a vocal monitor on smaller stages where space is limited, while its low profile maximizes audience sightlines.
The Turbosound Flashline TFM152M Coaxial 2-Way 15" Stage Monitor is a compact 1600W switchable passive/bi-amped floor monitor consisting of a coaxial carbon fiber-loaded 15" neodymium low-frequency and titanium dome 1.4" neodymium high-frequency combination driver in a reflex-loaded enclosure designed for concert touring. The coaxial drive unit is matched with an exponential horn flare for improved acoustic loading and controlled coverage. Both HF and LF coils utilize the same neodymium magnet assembly, which gives better efficiency and reduced weight. This allows the creation of a minimal-footprint monitor wedge, which combined with a 35° projection angle and 60 x 40° (H x V) dispersion pattern, is suitable as a vocal monitor on smaller stages where space is limited, while its low profile maximizes audience sightlines.
Amplify your music performances with the black 15" Coaxial 2500W Active 2-Way Stage Monitor from Turbosound. It is designed to deliver 2500W power featuring Klark Teknik Class-D technology. It features a 15" low-frequency driver and a titanium dome 1.4" neodymium high-frequency compression driver, which is mounted on a 60° horizontal by 40° vertical dispersion low-distortion waveguide. Designed to work individually without a controller, it is suitable for a wide range of portable speech and music sound reinforcement applications such as wedge monitoring, side-fill, and delay line at a wide range of venues including nightclubs, banquet facilities, houses of worship, and more.
Amplify your music performances with the black 15" Coaxial 2500W Active 2-Way Stage Monitor from Turbosound. It is designed to deliver 2500W power featuring Klark Teknik Class-D technology. It features a 15" low-frequency driver and a titanium dome 1.4" neodymium high-frequency compression driver, which is mounted on a 60° horizontal by 40° vertical dispersion low-distortion waveguide. Designed to work individually without a controller, it is suitable for a wide range of portable speech and music sound reinforcement applications such as wedge monitoring, side-fill, and delay line at a wide range of venues including nightclubs, banquet facilities, houses of worship, and more.
The 2-way full range TFX122M-AN is a 1,100 Watt 12" powered loudspeaker system that is ideally suited for a wide range of portable speech and music sound reinforcement applications. Designed to work individually without a controller, the TFX122M-AN provides optimal performance for wedge monitoring and is an exceptional choice for FOH, sidefill and delay line applications.
The 2-way full range TFX122M-AN is a 1,100 Watt 12" powered loudspeaker system that is ideally suited for a wide range of portable speech and music sound reinforcement applications. Designed to work individually without a controller, the TFX122M-AN provides optimal performance for wedge monitoring and is an exceptional choice for FOH, sidefill and delay line applications.
The 2-way full range TFX152M-AN is a 1,100 Watt 15" powered loudspeaker system that is ideally suited for a wide range of portable speech and music sound reinforcement applications. Designed to work individually without a controller, the TFX152M-AN provides optimal performance for wedge monitoring and is an exceptional choice for FOH, sidefill and delay line applications.
The 2-way full range TFX152M-AN is a 1,100 Watt 15" powered loudspeaker system that is ideally suited for a wide range of portable speech and music sound reinforcement applications. Designed to work individually without a controller, the TFX152M-AN provides optimal performance for wedge monitoring and is an exceptional choice for FOH, sidefill and delay line applications.
The 2-way full range TLX43 is a compact biamplified dual 4" 600-Watt line array element that is ideally suited to a broad range of speech and music sound reinforcement applications in fixed installation, portable and touring audio systems. The TLX43 is designed to work in conjunction with LAKE DSP and LAB GRUPPEN amplification, providing optimal FOH performance, as well as offering considerable flexibility to readily adapt to varying venue requirements.
The TLX43-FLB Flybar is designed to safely suspend unique or mixed arrays of TLX43 line array elements and TLX212L subwoofers. Engineered to meet BGV-C1 specifications, the flybar can suspend up to 10 TLX43 elements or 2 TLX212L subwoofers in unique arrays, or 1 TLX212L subwoofer and 4 TLX43 elements in a mixed array with a safety factor of 10:1. The flybar is secured to the uppermost speaker enclosure using the supplied drop links and rigging pins, with additional enclosures attaching in a similar manner below in succession. For suspension of mixed arrays, a second TLX43-FLB is used to couple TLX43 elements to the TLX212L subwoofer above.
The TLX43-RC4 road case, for up to 4 TLX43 line array elements, is designed to withstand the rigours of live concert touring. It is constructed from 12mm rigid plywood with 40 x 40 mm durable aluminium edging extrusions. High density foam provides internal support and superior protection in transit, night after night, city after city. The TLX43-RC4 features premium plated steel hardware: lockable castors with rubber tyres, durable handles and locking butterfly catches for a long working life.
NewThe VSSL SXBAR is a 150W wireless soundbar with 5.1 channels, designed to deliver immersive surround sound and premium audio quality. Featuring sleek black styling, it seamlessly integrates with your home entertainment system, offering effortless control and wireless connectivity for a superior listening experience. Perfect for enhancing your TV, movies, and music with rich, dynamic sound.
NewThe VSSL SX Wireless Home Speaker delivers premium audio with built-in streaming capabilities for a seamless listening experience. Designed for high-quality sound, it easily integrates into your smart home setup, offering effortless control via a mobile app. With sleek design and powerful performance, the VSSL SX elevates your home audio with rich, clear sound and streaming convenience.
The Grand Gemini Speaker Stands weighs around 13.6 KG (total), and this helps to maintain stand balance and stability. Also, it can adjust to seven different heights. High-pitched drivers of the monitors can aim to the listener easily. Weight limit per stand is 15KG. Direct extension from top to the ground helps reduce resonance and maximise the benefits that bookshelf monitors can bring.
The Grand Gemini Speaker Stands weighs around 13.6 KG (total), and this helps to maintain stand balance and stability. Also, it can adjust to seven different heights. High-pitched drivers of the monitors can aim to the listener easily. Weight limit per stand is 15KG. Direct extension from top to the ground helps reduce resonance and maximise the benefits that bookshelf monitors can bring.
Wharfedale DIAMONDSTUDIO5BT Speaker Active 1x5" 140W Continous 280W Peak with Bluetooth
Wharfedale DIAMONDSTUDIO7BT Speaker Active 1x6.5" 150W Continuos 300W Peak with Bluetooth
The EVO-X Series strikes the perfect balance between affordability and performance. Â Positioned in-between the Impact Series and the Delta Series of passive loudspeakers, EVO-X is a new multipurpose lineup of 8 models featuring many useful and practical design elements.
AED 1,582.19 Exc VATThe EVO-X Series strikes the perfect balance between affordability and performance. Positioned in-between the Impact Series and the Delta Series of passive loudspeakers, EVO-X is a new multipurpose lineup of 8 models featuring many useful and practical design elements.
AED 2,147.62 Exc VATThe Wharfedale EVP-X15PM is a wedge loudspeaker designed for stage monitoring. Delivering everything that made the EVP-X Series a best seller, the EVP-X15PM is built for the stage, with even more convenience. Complete with the same pro-tech drivers, elliptical waveguide horn technology and of course, tonnes of power the EVP-X15PM is also powered, without the need for an amplifier. Specially developed for on-stage monitoring, the amplifier module includes a 5-band EQ and a seperate amplified output to connect to an additional stage monitor such as the EVP-X15M.
AED 1,380.95 Exc VAT
No products in the cart.