Designed to offer superior system sonic performance and flexibility, the 641/641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 641 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth® function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO® every tool is at your disposal to maximize the response of your system.
The ZonePRO 641m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.
The 641m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.
The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.
The dbx DriveRack 260 Loudspeaker Management System is a processor designed for complete system control of equalization, dynamics, and routing possibilities in live or contractor sound applications. Its powerful processing includes both a linkable 28-band graphic and a 9-band parametric EQ, while system dynamics are controlled by the built-in compressor. Further component protection is provided by DBX's PeakStopPlus limiters, which help protect against too much power and sudden transient spikes.
Before users adjust the EQ, they may want to utilize the internal pink noise generator and real time analyzer to get familiar with the room acoustics. In addition, an easy to assign, flexible alignment time delay and handy 15V phantom powered mic input are also provided for further room management and control.
The goal of a high-quality control processor is to help "dial in" a room and contribute to the overall system performance without directly interfering with audio integrity. Custom templates are built-in for specific amplifier and speaker combinations with user setups easily adjusted using the Wizard setup system and complete DriveWare GUI control.
An outstanding tool for maximizing audio quality in a number of environments, the DriveRack 260 is derived from an already proven series of processors and continues the tradition of providing flexible system control using simple, intuitive interfaces.
The DriveRack VENU360 from dbx is a loudspeaker-management processor designed to protect and optimize front-of-the house, stage monitor, delay-fill, and zone loudspeaker systems in clubs, outdoor music events, or houses of worship.
Connect the VENU360 between your mixer and amplifiers/powered speakers, and use it for precise feedback elimination, automatic speaker level and room equalization, crossover-frequency setting, dbx compression/limiting, driver alignment delay, and more.
The unit provides a 5 x 6 routing/mixing matrix (using four AES signals and one analog signal) and a 3 x 6 signal processing chain. The 24-bit A/D and D/A converters with dbx Type IV conversion protect the incoming audio signal from accidental digital clipping at the A/D stage, while the 32-bit floating point, 48 / 96 kHz internal processing produces professional audio quality with high headroom and wide dynamic range.
The PB-48 is a patchbay that just works, all the time, every time. It comes in two flavors: half-normalled or de-normalled, with 48 1/4" points on the front panel, connected to 48 1/4" points on the rear. The PB-48 is a rugged, noise-free, versatile patchbay designed to serve all your patchbay needs, from providing clear and easy access to your mixer and other studio gear, to reducing the wear and tear on their jacks, to facilitating quick and precise rerouting of devices within your studio setup.
The PMC16 is a 16 channel personal monitor controller which allows the user to create a custom mix from 16 channels of audio. Designed to be used with the dbx TR1616 or any other BLU link compatible device, the PMC16 allows for monitoring with headphones, in-ear monitors, powered monitors, or traditional wedge monitors. Multiple PMC16s can be daisy chained using CAT5e cable allowing each user to receive 16 channels of high-resolution digital audio and create their own personalized mix to suit their monitoring needs. The PMC16 comprises a 16 channel mixer section with full control of levels, panning, effect send levels, muting, and soloing. Onboard Lexicon© reverb provides the finishing touch. The PMC16’s output processing section includes: stereo width control, wedge monitor compensation EQ, high and low master EQ, master level control, and dbx limiting. With a Setup Wizard for ease of configuration, full 16 channel level metering, channel grouping, 16 preset locations for future recall of configurations and mixes, and an intuitive yet powerful user interface, PMC16 gives you the power to dial in YOUR mix exactly as YOU want it, in real time.
The dbx ZonePRO 640m is a digital zone processor with a fixed I/O, preconfigured architecture, configurable insert processing, and optional duplication of audio to an additional ZonePRO device via a link bus.
The unit features six inputs with four balanced mic/line switchable terminal block inputs and two unbalanced, mono-summed RCA input pairs. There is hardware-controlled microphone gain per channel. The pre-configured architecture has input processing with a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.
The Dynacord CP-48 is a professional 19" NF-connector panel designed specifically for COBRA systems, featuring 4-pole and 8-pole Neutrik Speakon connectors for reliable stereo speaker connections. Built for touring and fixed installations, it ensures durable, high-quality signal distribution and easy integration with Dynacord audio networks.
Ecler ALMA24 is a professional 2x4 channel digital loudspeaker manager featuring high-resolution DSP, USB connectivity for easy configuration, and versatile signal processing capabilities. Ideal for precise audio control in multi-zone sound systems.
The Ecler BOB-04 is a compact 4-channel Dante™/AES67 digital audio interface that provides four balanced line-level analog outputs, enabling seamless integration of analog audio equipment into digital audio-over-IP systems. Powered via PoE and fully compatible with Dante Controller, it's ideal for fixed installations requiring reliable networked audio distribution.
The Ecler BOB-22 is a compact 2x2 Dante™/AES67 digital audio interface designed to integrate analog audio equipment with audio-over-IP networks. It features 2 balanced mic/line inputs and 2 line-level outputs, high-quality 24-bit AD/DA converters, and PoE support for simple installation—ideal for professional AV and fixed audio installations.
The Ecler CCORE 3x3 is a wireless audio transmitter unit designed for professional installations requiring flexible and scalable audio distribution. Part of the WiSpeak system, it serves as the master unit, enabling seamless communication with up to 24 paired receivers such as the TUBE, CUBE, or GLOBE.
The Ecler CDUONTPLAYER is a dual audio player with independent outputs, supporting network streaming and USB media playback. Ideal for commercial installations requiring reliable multi-source audio.
The Ecler CPLAYERONE is a versatile streaming player featuring an LCD display, microSD support, and compatibility with DLNA and AirPlay for seamless wireless audio playback.
The Ecler CPLAYERZERO is a compact streaming player supporting microSD playback, DLNA, and AirPlay for seamless wireless audio streaming in commercial and residential setups.
The Ecler CWILDTX is the central hub of the WiLD Series wireless audio system, designed to deliver high-quality, long-range audio transmission in commercial environments. It features both unbalanced stereo RCA and Bluetooth® Class 1 inputs, allowing versatile audio source integration. The transmitter supports up to 32 paired receivers, ensuring synchronized audio distribution across multiple zones. With a recommended range of up to 150 meters and a 3-band EQ and master volume control on the front panel, it offers flexible and user-friendly operation. Additional features include a MUTE port for external audio silencing, a REMOTE port for volume control via compatible wall panels, and a USB-C power supply for easy installation. Ideal for applications in retail, museums, hospitality, and corporate settings, the CWILDTX provides a seamless and scalable wireless audio solution.
The Ecler DN44BOB is a professional 4x4 Dante™/AES67 digital audio interface designed for seamless integration of analog audio devices into IP-based audio networks. Featuring four balanced mic/line inputs and four balanced line outputs, high-performance 24-bit converters, and PoE support, it’s ideal for commercial installations requiring reliable and flexible audio-over-IP solutions.
The Ecler eMPAGE is a digital paging console designed for seamless integration with Ecler HUB, MIMO88, MIMO88SG, and MIMO1212SG digital audio matrices. It features 20 mechanical keys with integrated LED indicators, a gooseneck microphone, and an electronic ink display for clear zone labeling. Utilizing a single RJ45 connection for power, audio, and control, the eMPAGE supports the management of up to 16 paging zones and offers programmable keys for customized functionality.
Ecler HUB1408 is a 14x8 digital audio zoner with built-in DSP, designed for plug & play installation. It features 14 inputs, 8 balanced outputs, Ethernet and RS-232 control, and supports remote wall panels and app control. Ideal for multi-zone audio systems in commercial spaces.
The Ecler MIMO1212SG is a professional-grade 12x12 digital matrix audio DSP processor designed for complex multi-zone sound systems. It features 12 mic/line inputs, 12 balanced outputs, powerful DSP functions, and full remote control via Ethernet, making it ideal for commercial, corporate, and hospitality audio installations.
The Ecler MIMO88 is an 8x8 digital audio matrix processor that offers advanced DSP capabilities and is designed for scalable audio routing in professional installations.
No products in the cart.
