ECLER MIMO88 is an 8 in / 8 out digital audio matrix, fully programmable and linkable to a second unit to become a 16×16 matrix, with real routing from any input to any output.
FEATURES
- Expandable to 16 inputs / 16 outputs to become a real 16 x 16 matrix
- Fully programmable and controllable via EclerNet software
- UCP (User Control Panels) remote control system, compatible with WPNETTOUCH and third-party devices, such as computers, tablets, smartphones, etc.
- TP-NET protocol compatible, for third-party control systems integration
- DSP processing: signal generator, delays, full parametric EQ filters at inputs and outputs, inputs noise gate, level, mute, phase, vu-meters, outputs compressor / limiter,ducking (priority & overriding), virtual and physical paging stations management,automatic mixer function, presets save & recovery, scheduled events triggering, etc.
- FREQUENCY SHIFTER function to avoid acoustic feedback (Larssen Effect), available for each INPUT channel
- WPNET4KV and WPNET8K compatible control panels (using specific retro-compatible Firmware).
Â
SPECIFICATIONS
DIGITAL ENGINE
- Processor – 2 x 32/64bit
AUDIO CONVERTERS
- Sampling rate – 48kHz
- Resolution – 24bit AKM
- Latency – <2.9ms (+1ms for 16×16)
- Frequency response – 5Hz to 24kHz (-3dB)
- Dynamic range – AD:110dB, DA: 115dB
ANALOGUE AUDIO INPUT PORTS
- Number of input ports – 8+8, Mic/Line
- Connection type – Terminal block (symmetrical)
- Input sensitivity – -50dBV to +10dBV in 0.5dB step
- Input impedanc – Balanced, >4kΩ
- Max input level – +27dBV = +30dBu
- THD + Noise
      – THD+Noise @ 1kHz, 0dBV input (line) <0.004%
– HD+Noise @ 1kHz, -40dBV input (mic.) <0.008%
– HD+Noise @ 1kHz, -40dBV input (mic.) <0.008%
- CMRR – 65dB typ.
- Phantom power – +42VDC, 5mA max. software switched
ANALOGUE AUDIO OUTPUT PORTS
- Number of output ports – 8+8, Line
- Connection type – Terminal block (symmetrical)
- Max output level – +18dBV = +21dBu
- Crosstalk – Better than 90dB (100dB typ.)
ANALOGUE MONITOR PORTS
- Number of monitor output ports – 2
- Connection type – Terminal block (symmetrical)
- Headphones – Jack 1/4 (>200mW/200Ω)
CONNECTIVITY
- Ethernet – 1 RJ-45, Ethernet Base-Tx 10/100Mb Auto X-Over CAT5 up to 100m
- Serial port – RS-232
- Programing and control – EclerNet manager (software), TPNET (UDP), UCP control panels
REMOTE CONTROL CONNECTIONS
- Digital remote controls – Expansion LINK BUS (16×16 ch.): Proprietary over CAT5, Xover cable up to 100m.
Remote Bus: 2, over twisted pairs; up to 1km (see specific specs.)
- GPIs – 8, from 0 to 10VDC or TTL level
- GPOs – 8, 3 poles isolated relay; 1A, 48VDC max
REAL-TIME CLOCK
- Retention time – 1 month aprox. (ambient temperature dependant)
- Accuracy – ±1 minute / year
ELECTRICAL
- Secondary power supply – +12VDC, 1.2A. max. (short circuit protected)
- AC mains requirement – 90-264VAC @ 47-63Hz
- AC mains connector – IEC mains socket connector
- Power consumption – 45VA
PHYSICAL
- Operating temperature – Min: -10°C ; 14°F – Max: 40°C ; 104°F
- Operating humidity – <85% HR
- Storage temperature – Min: -10°C ; 14°F – Max: 40°C ; 104°F
- torage humidity – <90% HR
- Installation options – 19″ rack format (1RU)
- Optional accessories – WPa series control panels, WPNETTOUCH digital panel, eMPAGE
- Dimensions – 482.6 x 44 x 266.5 mm / 19 x 1.73 x 10.5 in. (WxHxD)
- Weight – 3.5 kg / 7.72 lb
- Shipping dimensions – 590 x 70 x 380 mm / 23.23 x 2.76 x 14.96 in. (WxHxD)
- Shipping weight – 4.8 kg / 10.58 lb
No products in the cart.
Reviews
There are no reviews yet.