Shop

• Ultra-efficient, dual mono Class D power amplifier with a pair of 8” custom-designed dual-cone woofers to deliver articulate acoustic sound reproduction with both punch and high end clarity
• Place on the floor it has a minimal stage footprint and can be placed on its side feet for tonal variation or mounted on a speaker stand for maximum projection
• 2 independent channels take XLR or Jack inputs, 3-band EQ, ‘Shape’ control for optimization; connection of a mic and instrument or two acoustic instruments, and AUX input for backing tracks
• Levels can be adjusted by holding down the Chorus switch and turning the Reverb control pot; the chorus level is stored and will even be recalled at the next switch on
• Anti-Feedback button can automatically scan for and eliminate unwanted feedback. Phase switch to remove destructive interference when a player is too close to the amplifier

The CUB12R houses a 12" driver, giving it an increased volume and full rich valve tone. Looking at the preamp it's clear that the CUB12R packs more into the amp than it's smaller siblings. It features Gain, Treble, Middle, Bass, Volume, Tone and Reverb controls. The output section of the CUB12R is based around a pair of EL84 tubes giving it a more scooped tone than it's smaller counterparts. Think smooth rich overdrive with bags of gain.

The CUB12R features two input sockets one-labeled 15W the other labeled less than one watt. Plug into the "less than one watt" and you get your great tube tone at a whisper. The less-than-one-watt option allows you to drive the power amp section really hard allowing you to really access the "dark art" tone of power amp distortion.

The CUB12R is a member of the CUB range which offers everyone the opportunity to experience the sound and feel of a good quality tube amp at what is an amazing price.

The IRT-Studio-SE offers the same classic tones as the big Ironheart amps, but in a low-power, compact, and lightweight design. Equipped with ECC83 Preamp valves and EL84 output valves, the IRT-Studio amp delivers 15W of pure tonal power, with the option to switch to less than 1W via the second input for times when loud volumes aren’t permitted. Even with is compact design, the amp head still offers 3 channels and a wide range of control to dial in the perfect tone for any situation. Its 3 band EQ features push/pull EQ shift functions, extended the frequency ranges for further tone shaping, while the dynamics, tone, and reverb controls allow players to give their sound a personal touch.

Along with its incredible tonal capabilities, the Ironheart Studio features a variety of ins/outs to seamlessly integrate into existing rigs. Its D.I. output is perfect for directly connecting the amp head to DAWs, PAs, and mixing consoles, and features a high-quality speaker emulator to deliver all valve tones to your DAW or PA, or even both at the same time. The amp is also equipped with an internal dummy load, removing the need to connect an external speaker and deliver a truly silent recording. The FX loop is idea for connecting your favourite stompboxes, and the Aux in is perfect for playing along to backing tracks and songs.

The new IRONHEART  2 x 12" combo - the IRT60-212 bangs out 60 watts RMS of all ECC83 & 6L6 valve tone with masses of gain and like its metal relatives - such as the Laney KLIPP and the Laney AOR hits you hard between the eyes like a power hammer from hell!

The Combo houses three sonically distinct channels: - Clean, Rhythm & Lead all with independent level controls. The Clean and the Rhythm channels share a 3- band EQ with pull-push shift features on each control that gives you total control over your sound allowing you to dial in that killer tone. 

The IRT60-212's Lead channel has an independent 3- band EQ with pull-push shift features on each control allowing for some radical lead tones.

The Pre Boost feature makes the need to carry additional boost pedals redundant! Something any gigging player will admit is a great feature.  On the IRT60-212 the footswitchable Pre Boost works just like kicking in your favourite boost pedal right before your amp.  It's available where ever you are on the preamp and can be switched in or out via the supplied footswitch.

A standout feature of the IRT60-212 range is the WATTS control in the master section.  This allows you to really screw down the output of the IRT60-212's 2 x 6L6 output section, down to less than 1 watt!  Great for getting the sound of a full -blown metal head at bedroom levels.

Combine this with a Dynamics control which tightens up you low end when you're playing a full power and you have a great metal tone at whatever level you decide to play at.

The Tone control works really effectively and allows you to make quick adjustments to your overall sound should you for example change guitars.

The L20T-112 combo features the same highly respected preamp design as the rest of the Lionheart range and consists of a clean and drive section with shared 3 band EQ, global reverb and an overall tone control.

The L20T-112's all valve power amp houses a road tested 20 Watt Class A parallel single ended EL84 equipped output section, not previously seen in a Lionheart 1 x 12 combo. This offers the player an increased headroom option in a combo whilst still giving masses of vintage valve tone in a compact stylish package.

The rear panel of the L20T-112 features a footswitch socket for switching channel and reverb with the FS2 provided, an FX loop for connecting external FX devices and finally an external speaker socket for adding an additional speaker enclosure such as the LT212. The L20T-112 also features the innovative folding tilt mechanism that has proved popular on the rest of the Lionheart range.

The L20T-112 can sound either vintage or modern depending on how you use the preamp controls - back off the gain, wind up the master and you're cooking up serious retro tone. Digging in hard produces extra bite, or backing off cleans it all up.

The Lionheart range is a significant amplifier in todays market offering serious tone that's often difficult to find even in products costing twice the price. Lionhearts are easy to use and most players will get a great tone out of them within seconds.