The VX-2000DS Emergency Power Supply Unit supplies the DC power to each equipment in the VX-2000 system by connecting the VX-200PS Power Supply Unit. It keeps the battery unit that contains 2 × 12 V sealed lead batteries charged compensating for the temperature of the battery charging voltage. When the DC power supply from the VX-200PS stops, the VX-2000DS is automatically switched to the backup battery.
Specifications
| Power Source | 230 V AC, 50/60 Hz |
|---|---|
| Power Consumption | 240 W max. |
| Applicable Battery | YUASA NP series (12 V × 2 or 4) |
| Charging Method | Trickle charging |
| Charging Current | 5 A max. |
| Charging Output Voltage | 27.3 V ±0.3 V (at 25?) Temperature correction coefficient: -40 mV/? |
| Power Supply Input | 6 M4 screw terminal, distance between barriers: 11 mm |
| DC Power Output | 6 (25 A max. each) M4 screw terminal, distance between barriers: 11 mm |
| Control Connector | RJ45 female connector for connecting the VX-2000SF Surveillance Frame. Twisted-pair straight cable (TIA/EIA-568A standard) Type of control signal: Battery check, AC power status, DC power status, charging circuit failure, and battery failure |
| Battery Connection | 1 pair of positive and negative terminals Applicable cable diameter: AWG 6 – AWG 1/0 |
| Operating Temperature | 0? to +40? |
| Finish | Panel: Surface-treated steel plate, black, 30% gloss, paint |
| Dimensions | 482 (W) × 88.4 (H) × 377.6 (D) mm |
| Weight | 10.5 kg |
| Accessory | Rack mounting screw ……4, Fiber washer ……4, Blade fuse (40 A) ……3, Fuse (T3.15 A L) ……1, Power cable ……1, Insulating sheet ……1, Attention label (German) ……1 |
No products in the cart. 
Reviews
There are no reviews yet.