Description

For singers, rappers, and musicians who need a large-diaphragm studio condenser mic and don’t have the funds to go big, the Tascam TM-80 presents a simple solution. Since it shares design characteristics with pricier mics and has no switches to configure, it offers a blend of quality and ease of use that makes it appealing for home recording. Also included with the mic are a shockmount, tabletop tripod stand, and mic cable, making the TM-80 a complete mic package.

The heart of the mic is its 0.7″ aluminum-diaphragm condenser capsule, which produces a hotter output level and wider frequency range than most dynamic mics. Use it on vocals, acoustic instruments, or even guitar/bass speaker cabinets. By utilizing a cardioid polar pattern, the TM-80 is able to capture less room sound and background noise than the omnidirectional mics found in computers and mobile devices. For proper functionality of the TM-80, it should be plugged into to the XLR input of a device that can supply phantom power.

 

Features

  • For Voice, Acoustic Instruments & Cabs
  • XLR Output for Hookup to Mic Preamp
  • Runs on 9 to 48V Phantom Power
  • Shockmount Inhibits Vibration Noise
  • Cardioid Polar Pattern Reduces Ambience
  • High Sensitivity for Strong Output
  • Wide Frequency Response
  • 0.7″ Aluminum Diaphragm
  • Tabletop Stand and XLR Cable

 

Specifications

Microphone
Primary Applications Studio Recording
Form Factor Large Diaphragm Mic / Stand/Boom Mount
Intended Sound Sources Vocals, Speech/Voice Over, Instrument
Sound Field Mono
Operating Principle Pressure Gradient
Capsule Condenser
Diaphragm 0.71″ / 18 mm
Polar Pattern Cardioid
Orientation Side Address
Circuitry Solid-State
Pad None
High-Pass Filter None
Tone Adjustment None
Gain Adjustment None
Indicators None
On-Board Controls None
Windscreen None

 

Performance
Frequency Range 20 Hz to 20 kHz
Maximum SPL 136 dB SPL (1 kHz, 1% THD)
Impedance 200 Ohms ± 30% at 1 kHz
Load Impedance > 1000 Ohms
Sensitivity -38 dBV/Pa at 1 kHz
Signal-to-Noise Ratio 77 dB
Equivalent Noise Level 17 dB A-Weighted

 

Connectivity
Output Connectors (Analog) 1 x XLR 3-Pin Male (on Mic)
Headphone Connector None
Cable Length 6′ / 1.8 m

 

Power
Bus Power None
Operating Voltage 9 to 48 V (Phantom Power)

 

Physical
Color Silver
Mounting Shockmount (Included)
Included Case None
Included Filters None
Construction Material Die-Cast Zinc
Dimensions ø: 1.9 x L: 6.5″ / ø: 4.8 x L: 16.5 cm
Weight 10.6 oz / 301 g

 

Packaging Info
Package Weight 1.79 lb
Box Dimensions (LxWxH) 11.7 x 4.95 x 3.05″

 

 

Additional information
Brand

Tascam

Reviews (0)
Ratings

0.0

0 Product Ratings
5
0
4
0
3
0
2
0
1
0

Review this product

Share your thoughts with other customers

Write a review

Reviews

There are no reviews yet.