View wishlist“Dynacord SL-2400 2x1200W Power Amplifier” has been added to your wishlist

Peavey IPR2 2000 2-Channel Power Amplifier

Name: Peavey IPR2 2000 2-Channel Power Amplifier
Brand: Peavey
SKU: 3609482
Price: 2586.00 AED
Availability: InStock

Sku: 3609482

AED 2,586.00 Exc VAT

Available in stock

Features

The Peavey IPR2 2000 2-Channel Power Amplifier features 2-channel independent 4th-order Linkwitz-Riley crossovers and uses the DDT (Distortion Detection Technique) for virtually eliminating distortion. It features a resonant switch-mode power supply and is designed based on the high-speed IPR class-D topology that yields a high audio resolution and efficiency. The amplifier features detented input controls and speakON output connectors. Not only that, this lightweight amplifier also has individual signal pass 1/4” jacks on each channel.

EAN: 14367622782

Compare Wishlist

Category: Powered Amplifiers

Description

Features

Specifications

Power	Rated Watts (2 Channels at 2 Ohms): 1100 W 20 ms repetitive burst / 900 W 1% THD, both channels driven at 1 kHz Rated Watts (2 Channels at 4 Ohms): 600 W 20 ms repetitive burst / 570 W 1% THD / 530 watts 0.15% THD, both channels driven at 1 kHz Rated Watts (2 Channels at 8 Ohms): 370 W 20 ms repetitive burst / 325 W 1% THD / 300 W 0.15% THD, both channels driven at 1 kHz
Minimum Load Impedance	2 Ohms
Frequency Response	Frequency Response: 10 Hz to 30 kHz; ±3 dB at 1 W, 8 Ohms 20 Hz to 20 kHz (2 Channels x 2 Ohms): <0.25% at 650 W 20 Hz to 4 kHz, decreasing to 530 W at 20 kHz, both channels driven 20 Hz to 20 kHz (2 Channels x 4 Ohms): <0.15% at 470 W 20 Hz to 10 kHz, both channels driven 20 Hz to 20 kHz (2 Channels x 8 Ohms): <0.15% at 260 W 20 Hz to 10 kHz, both channels driven
Input CMRR	> -69 dB at 1 kHz
Voltage Gain	x 60 (+35 dB)
Crossover	100 Hz switchable 2nd order high pass and 3rd low pass per channel
Crosstalk	> -70 dB at 1 kHz at 250 W power at 8 Ohms
Hum and Noise	> -105 dB, “A” weighted referenced to rated power at 4 Ohms
Slew Rate	> 12 V/μs
Damping Factor	> 170:1 at 20 Hz to 1 kHz at 8 Ohms
Input Sensitivity	.775 V ±3% for 1 kHz 4-Ohm rated power, .68 V ±3% for 1 kHz 2-Ohm rated power
Input Impedance	15 kOhms balanced 7.5 kOhms unbalanced
Current Draw	Current Draw (at 1/8 Power in VA (W): 540 (315) at 2 Ohms, 370 (185) at 4 Ohms, 240 (115) at 8 Ohms Current Draw (at 1/3 Power in VA (W): 1250 (760) at 2 Ohms, 750 (425) at 4 Ohms, 460 (240) at 8 Ohms
Idle Consumption	90 VA, 40 W
Cooling	Temperature dependent variable speed 3.1″ / 80.0 mm DC fan
Controls	2 x front panel attenuators, crossover select switch for HPF, Normal, and LPF
Indicator LEDs	5 x LED Indicators per Channel: Active, Signal, DDT, Temperature, and DC
Protection	Thermal, DC, subsonic, incorrect loads, under voltage, and over voltage
Connectors	Inputs: Dual Combination XLR-1/4″ / 6.35 mm Outputs: Dual 1/4″ / 6.35 mm signal patch, dual twist lock connectors
Construction	0.062″ / 1.575 mm thick aluminum
Dimensions	19.0 x 3.5 x 10.5″ / 482.6 x 88.9 x 266.7 mm Handle: 0.6″ / 15.2 mm
Weight	7.12 lb / 3.23 kg