Versatile and Durable Workhorse Engineered to Satisfy All But the Most Power-Hungry Needs. The versatile FP 7000 supplies power output (2 × 3500 W at 2 ohms) well matched to a wide variety of applications. At the core of the FP 7000’s performance is a breakthrough advance in LAB GRUPPEN’s patented Class TD® output stage, an amplifier topology that approaches the exceptional efficiency of Class D while retaining the sonic purity of proven Class B designs. Further contributing to the remarkable efficiency of the FP 7000 is a Regulated Switch Mode Power Supply (R.SMPS™), which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage. A highly refined and updated circuit layout optimizes the interaction of R.SMPS and Class TD to produce the excellent power density of the FP 7000.
Features
- 7,000 Watt, 2-channel amplifier with up to 3,500 Watts output per channel and NomadLink network for monitoring and control
- Selectable gain plus scalable Voltage Peak Limiter (VPL) and bridge-mode operation allow custom configuration for any application
- 2 x 3,500 Watts into 2 Ohms, 2 x 2,800 Watts into 4 Ohms, 2 x 1,450 Watts into 8 Ohms, 2 x 730 Watts into 16 Ohms
- Proven and reliable Class-TD output stage delivers Class-A/B audio quality with Class-D efficiency
- Regulated Switch Mode Power Supply (R.SMPS) ensures constant power output at all times
- Intuitive DeviceControl software monitors and controls key functions via the NomadLink network
- Comprehensive protection scheme including current, voltage, DC, temperature, short circuit and open load warnings
- Efficient Intercooler copper cooling system dissipates more heat for extended peak output
- 2 x balanced analog audio inputs and 2 x link outputs on Neutrik XLR* connectors
- 2 NL4 Neutrik speakON* output connectors
- Removable dust filter grilles for increased air circulation
- Rugged 2U rackmount chassis for durability in touring applications
Specifications
General
| Number of amplifier channels | 2 |
| Peak total output all channels driven | 7000 W |
| Peak output voltage per channel | 155 V |
| Max output current per channel | 59 A peak |
Max output power (all channels driven)
| 2 ohms | 3500 W |
| 4 ohms | 2800 W |
| 8 ohms | 1450 W |
| 16 ohms | 730 W |
Max output power bridged
| 2 ohms | Not recommended 1 |
| 4 ohms | 7000 W |
| 8 ohms | 5600 W |
| 16 ohms | 2900 W |
Performance
| THD 20 Hz – 20 kHz at 1 W | <0.1% |
| THD at 1 kHz and 1 dB below clipping | <0.05% |
| Signal to Noise Ratio | >112 dBA |
| Channel separation (Crosstalk) at 1 kHz | >70 dB |
| Input impedance | 20 kOhm |
| Output impedance @ 100 Hz | 19 mOhm |
Gain, Sensitivity and Limiters
| VPL, selectable per ch | 155, 121, 101, 83, 70, 56, 47, 38 V |
| VPL, when bridged 2 | 310, 242, 202, 166, 140, 112, 94, 76 V |
| Voltage Peak Limiter mode (per ch.) | Hard / Soft |
| Amplifier gain selectable (all channels) – rear-panel switches 2 | 23, 26, 29, 32, 35, 38, 41, 44 dB |
| Default gain | 35 dB |
| Level adjustment (per channel) | Front-panel potentiometer, 31 position detented from -inf to |
Connectors and Buttons
| Output connectors (per ch.) | Neutrik speakON |
| Input connectors (per ch.) | 3-pin XLR, electronically balanced |
| Output bridge mode | A+B – Ch. A is signal input source. A+B, C+D – Ch.’s A and C are input source |
| NomadLink network | On board, 2 x RJ45 connectors IN and OUT |
| Intelligent fans (on/off) | Yes, depending on presence of output signal |
| Power on/off and Remote enable on/off | Individual switches on front-panel |
| Cooling | Dual fan, front to rear airflow, no filter required, temperature controlled speed |
Front-panel user interface
| Common | NomadLink Network; Power Average Limiter (PAL)4; Power on |
| Per channel | Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute |
Power
| Operating voltage, 230 V / 115 V nominal 3 | 130-265 V / 65 -135 V |
| Minimum power-up voltage, 230 V / 115 V | 171 V / 85 V |
| Power Average Limiter (PAL) 4 | Yes |
| Soft-start / Inrush Current Draw | Yes / max. 5 A |
| Mains connector | 230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock |
Dimensions
| Dimensions | W: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”) |
Weight
| Weight | 12 kg (26.4 lbs) |
Finish
| Finish | Black painted steel chassis with black painted steel / aluminum front |
Approvals
| Approvals | CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC |
No products in the cart.
Reviews
There are no reviews yet.