2 x 240 Watt dual-channel Amplifier provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. Capable of delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations offering extreme flexibility on every channel. FA2402 is easy to install and operate – even for non-technical personnel. Simply put, the FA2402 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system.
Features
- 2 x 240 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Energy Star* certified design conserves energy and drastically reduces operational cost
- Direct drive, constant power technology for superior audio performance and reliability
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier input and output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
Specifications
Maximum Output Power
| 4 or 8 Ω per channel | 240 W |
Number of Ouput Channels
Minimun Load Impedance
| 4 Ω mode | 4 Ω |
| 8 Ω mode | 8 Ω |
| 70 V output mod | 20 Ω |
| 100 V output mode | 41 Ω |
Controls
| Front | N/A |
| Rear | Gain control, input sensitivty select (4 dBu / -10 dBV), load config (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter |
Indicators
| Power | On (blue), standby (yellow) |
| Limit (red LED), per channel | Input clip, output limit |
| Signal (green LED), per channel | >1.23 mV (-56 dBu) |
| Fault (red LED) | Overheat, DC fault, over current etc |
System
| Inputs | 2 x 3-pin 5.08 mm Euroblock connector |
| Input impedance | 10 kΩ unbalanced, 20 kΩ balance |
| Input sensitivty | Balanced: 1.23 V (+4 dBu) or 316 mV (-10 dBV) |
| Maximum input level | 9.75 V (+22 dBu) |
| Outputs | 1 x 4-pin 5.08 mm Euroblock connector |
| Output circuit type | Class D |
| Remote connector | 2 x RJ45 Ethernet connecto |
Performance
| Distortion, 1/8 rated power | <0.5% |
| Frequency response | 20 Hz to 20 kHz, +0.5 / -1 dB |
| Crosstalk | >65 dB |
| Signal-to-nois | >100 dBA |
| High-pass filter | 80 Hz HPF |
Circuit Protection
| Cooling | Convection-cooled, fanless |
| Amplifier protection | Thermal protection, over current protection, DC protection, high frequency protection |
| Load protection | Controlled start and shutdown behaviour, DC-fault protection |
Power Supply, Voltage
| Main voltage | 100-240 V~, 50/60 Hz with active power factor correction |
| Power consumption 1/8th rated power @ 4 Ω | 120 W |
| Mains connector | Standard IEC connector |
Dimensions / Weight
| Dimensions (H x W x D) | 44 x 218 x 280 mm (1.7 x 8.6 x 11.0″) |
| Weight | 2.6 kg (5.7 lbs) |
| Finish | Brushed black anodized aluminum chassis with black painted steel bottom |
| Approvals | CE, WEEE, CCC, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B, Energy Star 3.0 |
No products in the cart.
Reviews
There are no reviews yet.