The black WP-571 Active 1-Gang Wall Plate HDMI over Twisted Pair Transmitter from Kramer is a DGKat twisted pair transmitter for HDMI signals. The WP-571 converts an HDMI signal to a twisted pair signal and transmits it to a WP-572 (not included), which converts the twisted pair signal back to an HDMI signal. The transmitter supports a maximum data rate of up to 4.95 Gb/s. DGKat twisted technology converts TMDS as well as control and communication to signals that run over twisted pair cables. EDID PassThru passes EDID signals between the source and display. A single connection to the transmitter powers the receiver.
Features
- Maximum data rate of up to 4.9 Gb/s (1.65 Gb/s per graphic channel)
- HDTV compatible
- HDCP compliant
- DGKat Signal Integration technology converts TMDS as well as control and communication to signals that run over twisted pair cables
- HDMI Support – HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD
- 3D pass-through
- System Range:
- Up to 295′ (90m) at 1080i, or up to 98′ (30m) at 1080p on shielded BC-DGKat524 cable
- Up to 295′ (90m) at 1080i, or up to 230′ (70m) at 1080p on shielded BC-DGKat623 cable
- Up to 330′ (100m) at 1080i or up to 295′ (90m) at 1080p on shielded BC-DGKat7a23 cable.
- Requires shielded twisted pair (STP) cable
- Note: Transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer Cat 5, Cat 6, and Cat 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
- EDID PassThru passes EDID signals between the source and display
- ON LED – Lights red when receiving power only, orange when either input or output and power are attached, and green when both an active input and output are attached
- Single connection to the transmitter powers the receiver
- 1-gang US wall plate
- Used in board, conference, and training rooms, presentation systems, signal distribution, and home theater
Specifications
| Inputs | 1 x HDMI connector |
| Outputs | 1 x RJ45 twisted pair, DGKat |
| Bandwidth | Up to 4.95 Gb/s data rate (1.65 Gb/s per graphics channel). |
| Compliance With HDMI Standard | Supports HDMI and HDCP |
| Power Consumption | US: 12 VDC, 190 mA (single device); 360 mA total (when one device supplies the power to both devices) |
| Dimensions | 1.30 x 1.42 x 4.10″ (3.3 x 3.6 x 10.4 cm) |
| Weight | 0.18 lb (0.08 kg) |
Packaging Info
| Package Weight | 1 lb |
| Box Dimensions (LxWxH) | 7.38 x 4.75 x 3.5″ |
No products in the cart.
Reviews
There are no reviews yet.