Ecler MIMO1212SG 12×12 Digital Matrix Audio DSP Processor

MIMO1212SG (MIMO1212 SINGLE) is an EclerNet digital audio device that keeps the heart and soul of the standard MIMO88, its main features and its audio quality, to become a simplified and cost-effective version (12×12) of this acclaimed digital matrix.

FEATURES

• 12×12 digital matrix (not expandable)
• Fully programmable and controllable via EclerNet software
• Remotely controlled with UCPs (User Control Panels), when a UCP Server is in the system, compatible with the touchscreen WPNETTOUCH and third-party devices, such as computers, tablets, smartphones, etc.
• TP-NET protocol compatible, for third-party control systems integration
• DSP processing: signal generator, delays, full parametric EQ filters at inputs and outputs, inputs noise gate, level, mute, phase, vu-meters, outputs compressor / limiter, paging and ducking (priority & overriding), virtual and physical paging stations management, presets save & recovery, scheduled events triggering, etc.
• FREQUENCY SHIFTER function to avoid acoustic feedback, available in 4 inputs
• WPNET4KV and WPNET8K compatible control panels (using specific retro-compatible Firmware).

APPLICATIONS

Retail   Education   Corporate   Hospitality

SPECIFICATIONS

Technical Specifications

Digital Processing Engine

• DSP Processors: Dual 32/64-bit processors
• Sampling Rate: 48 kHz
• Resolution: 24-bit AKM converters
• Latency: <3.2 ms
• Frequency Response: 5 Hz to 24 kHz (-3 dB)
• Dynamic Range:
  • Analog-to-Digital (AD): 110 dB
  • Digital-to-Analog (DA): 115 dB

Audio Inputs

• Total Inputs: 12 (Mic/Line)
• Connector Type: Euroblock (Balanced)
• Input Sensitivity: -50 dBV to +10 dBV (0.5 dB steps)
• Input Impedance: 4 kΩ
• Maximum Input Level: +27 dBV (+30 dBu)
• Total Harmonic Distortion + Noise (THD+N):
  • Line Input (1 kHz, 0 dBV): <0.004%
  • Mic Input (1 kHz, -40 dBV): <0.008%
• Common-Mode Rejection Ratio (CMRR): 65 dB (typical)
• Phantom Power: +42 VDC, 5 mA (software switchable)

Audio Outputs

• Total Outputs: 12 (Line)
• Connector Type: Euroblock (Balanced)
• Maximum Output Level: +18 dBV (+21 dBu)
• Crosstalk: 90 dB (typical)

   

Connectivity & Control

• Ethernet: 1 RJ45, Ethernet Base-Tx 10/100Mb Auto X-Over CAT5 up to 100m
• Serial Port: RS-232
• GPI/O: 12 General Purpose Inputs
• Control Protocols: EclerNet, TP-NET
• Remote Control: Compatible with UCPs (User Control Panels), WPNETTOUCH touchscreen, and third-party devices (computers, tablets, smartphones)
• Software Compatibility: EclerNet Manager (version 3.03r4 or higher)

Power & Physical

• Power Supply: 90–264 VAC, 47–63 Hz
• Power Consumption: 75 VA
• Dimensions: 483 mm (W) x 266.5 mm (D) x 44 mm (H)
• Weight: 3.5 kg
• Mounting: 19″ Rackmount, 1U
• Operating Temperature: 0°C to +35°C
• Storage Temperature: -10°C to +50°C
• Relative Humidity: Up to 85% (non-condensing)

DSP Features

• Signal Processing:

  • Signal Generator
  • Delays
  • Full Parametric Equalizer (EQ) Filters (Inputs & Outputs)
  • Noise Gate (Inputs)
  • Level, Mute, Phase Control
  • VU Meters
  • Compressor/Limiter (Outputs)
  • Paging & Ducking (Priority & Overriding)
  • Virtual & Physical Paging Stations Management
  • Presets Save & Recovery
  • Scheduled Events Triggering

• Frequency Shifter: Available on 4 input channels to prevent acoustic feedback