Channels |
18 x Mic/Line 4 x Mic/Stereo Line
|
Auxiliary |
2 x Pre 2 x Post 2 x Pre/Post Switchable
|
Output Power |
Max Single Channel, Dynamic-Headroom, IHF-A: Into 2.66 Ohms: 2 x 1600 W Into 4 Ohms: 2 x 1250 W Into 8 Ohms: 2 x 675 W Max Single Channel, Continuous, 1 kHz, THD = 1%: Into 2.66 Ohms: 2 x 1350 W Into 4 Ohms: 2 x 1150 W Into 8 Ohms: 2 x 650 W Max Midband, 1 kHz, THD = 1%, Dual Channel: Into 2.66 Ohms: 2 x 1350 W Into 4 Ohms: 2 x 1000 W Into 8 Ohms: 2 x 600 W Rated, 20 Hz to 20 kHz, THD < 0.5%, Single Channel: Into 4 Ohms: 2 x 900 W Into 8 Ohms: 2 x 450 W
|
Maximum Output Voltage |
Power Amplifier, 1 kHz, No Load: 74 V rms
|
Maximum THD @ 1kHz |
MBW = 80 kHz: MIC Input to Master A L/R Outputs, +16 dBu, Typical: < 0.005% Power AMP Inputs to Speaker L/R Outputs: < 0.075%
|
DIM 30 |
Power Amplifier, 3.15 kHz, 15 kHz: < 0.05%
|
IMD SMPTE |
Power Amplifier, 60 Hz, 7 kHz: < 0.15%
|
Frequency Response |
-3 dB, ref. 1 kHz: Any Input to Any Mixer Output: 15 Hz to 70 kHz Any Input to Speaker L/R Output: 20 Hz to 30 kHz
|
Crosstalk @ 1 kHz |
Amplifier L/R: < -85 dB Channel to Channel: < -80 dB Mute- and Standby-Switch Attenuation: > 100 dB Fader and FX/AUX/MON-Send Attenuation: > 85 dB
|
CMRR |
MIC Input, 1 kHz: > 80 dB
|
Input Sensitivity |
All Level Controls in Max Position: Microphone: -74 dBu (155 µV) Line (Mono): -54 dBu (1.55 mV) Line (Stereo): -34 dBu (15.5 mV) CD (Stereo): -34 dBu (15.5 mV) Power AMP Inputs: +8 dBu (1.95 V)
|
Maximum Level |
Mixing Desk: Microphone Inputs: 21 dBu Mono Line Inputs: 41 dBu Stereo Line Inputs: 30 dBu All Other Inputs: 22 dBu All Other Outputs: 22 dBu
|
Input Impedances |
Microphone: 2 Kilohms Insert Return: 3.3 Kilohms 2-Track Return & CD Input: 10 Kilohms All Other Inputs: > 15 Kilohms
|
Output Impedances |
Phones: 47 Ohms All Other Outputs: 75 Ohms
|
Equivalent Input Noise |
Microphone Input, A-Weighted, 150 Ohms: -130 dBu
|
Noise |
Channel Inputs to Master A L/R Outputs, A-Weighted: Master Fader Down: -97 dBu Master Fader 0 dB, Channel Fader Down: -87 dBu Master Fader 0 dB, Channel Fader 0 dB, Channel Gain Unity: -81 dBu
|
Signal / Noise |
Power Amplifier, A-Weighted, 4 Ohms: 105 dB
|
Output Stage |
Amplifier: Class-D
|
Equalization |
LO Shelving: ±15 dB / 60 Hz MID Peaking, Mono Inputs: ±15 dB / 100 Hz to 8 kHz MID Peaking, Stereo Inputs: ±12 dB / 2.4 kHz HI Shelving: ±15 dB / 12 kHz Master EQ 11-Band (63 Hz, 125 Hz, 250 Hz, 400 Hz, 630 Hz, 1 kHz, 1.6 kHz, 2.5 kHz, 4 kHz, 6.3 kHz, 12 kHz): ±10 dB / Q = 1.5 to 2.5
|
Filter |
LO-CUT, Mono Inputs: f = 80 Hz, 18 dB/oct. Voice Filter, Mono Inputs: Switchable Feedback Filter, MON 1/2: 70 Hz to 7 kHz, Notch, -9 dB Speaker Processing: LPN, Switchable
|
Effects |
Type: Dual Stereo 24/48-Bit Multi-Effects Processors Effects Presets: 100 Factory + 20 User, Tap-Delay Remote Control: Footswitch, MIDI
|
Display |
128 x 64 pixels, OLED
|
Digital Audio |
Channels: 4 x Inputs / 4 x Outputs AD/DA Conversion: 24-Bit Sampling Rate: 44.1 / 48 / 88.2 / 96 kHz PC Interface: USB 2.0, Female Type-B Peak Display: 6 dB Before Clip
|
MIDI Connectors |
1 x 5-Pin DIN, Input / Output
|
Power Control |
Output: Adjustable Longterm RMS Limiter
|
Protection |
Mixer Outputs (Relay Controlled): MON 1, MON 2, MASTER A Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-On Delay, Back EMF Switching Mode Power Supply (µC controlled): Inrush Current Limiters, Mains Over/Undervoltage, Mains Overcurrent, High Temperature
|
Cooling |
Continuous Speed-Controlled Fans
|
Phantom Power |
Switchable In Groups: 48 VDC
|
Power Requirements |
SMPS with Auto Range Mains Input: 100 to 240 VAC, 50/60 Hz
|
Power Consumption |
At 1/8 Maximum Output Power, 4 Ohms: 450 W
|
Safety Class |
I
|
Ambient Temperature |
40 to 105°F / 5 to 40°C
|
Dimensions |
32.2 x 6.1 x 19.6″ / 818.5 x 155 x 498.5 mm (without Lid)
|
Weight |
39.7 lb / 18 kg
|
Reviews
There are no reviews yet.