The Dynacord COBRA-PWH Speaker is equipped with an electronic circuit called VOICE COIL TRACKING PROTECTION. This circuit senses the terminal voltage of the transducer and simulates the thermal behaviour of the woofer´s voice coil. In case of potential thermal overload the power applied to the speaker is reduced to a safe level. Power amps up to 1200W/8Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations.
The VOICE COIL TRACKING PROTECTION exhibits “soft” switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.
The COBRA-PWH cabinet is made of 18mm birch plywood. All corner joints and braces are grooved and glued. The cabinet´s surface is coated with an extremely durable Polyurethane which exceeds the quality of a standard lacquer finish by an order of magnitude.
A powder coated steel grille and a lockable cover protects the COBRA-PWH against damage during transport and bad environmental conditions.
FEATURES
- Planar Waveguide Horn Technology – Uses four specially designed horns for highly efficient low-frequency sound projection with controlled dispersion.
- High SPL Output – Capable of delivering extremely high sound pressure levels, ideal for large-scale live events and touring applications.
- Band-Pass Subwoofer Design – Provides deep, tight, and powerful bass response in the 38 Hz–150 Hz range (approx.), optimized for live sound.
- Cardioid Setup Compatible – Designed for use in cardioid or end-fired configurations to reduce unwanted rearward bass radiation.
- Road-Ready Construction – Built with durable materials and protective coatings for use in tough touring environments.
- Optimized for COBRA Systems – Seamless integration with Dynacord COBRA-TOP and system controllers for full-range, high-output PA systems.
- Efficient Power Handling – Engineered for maximum output with optimized amplifier matching.
- Stackable and Arrayable – Can be used in stacks or arrays for scalable subwoofer configurations.
SPECIFICATIONS
- Cabinet: Subwoofer
- Configuration: Planar Waveguide Bass Horn
- Nominal Impedance: 8 Ohms
- Rated Power RMS: 600 W
- Program Power: 1200 W
- SPL 2,83V / 1 m 1 W / 8 Ohm: 101 dB
- Max. SPL 1m (Calculated): 132 dB
- Frequency Response (-10dB): 30 Hz – 150 Hz, Measured with DSP 244 Preset COB4TOPFAR200203
- Active Crossover Frequency: 124 Hz
- Voice Coil Tracking Protection: Yes
- Components: EVX 180 B
- Connector Wiring: SUB (4-Pole 1+/1-) ( 8-Pole 1+/1-)
- Connector Model: Speakon 2x NL4 MPR, 2x NL8 MPR
- Dimensions (W x H x D), mm: 605 x 910 x 823
- Net Weight: 72.0 kg
- Enclosure Material: Birch Plywood 18 mm
- Finish: Black Polyurethane
- Grille: Powder Coated Steel
- Handles: x6
- Webbing Strap Point: x4
- Front Cover: x1
- Castors: x4
Reviews
There are no reviews yet.