Enjoy stereo sound from a variety of CD types with the Denon DCD-800NE CD Player. It uses a Burr Brown PCM1795 digital-to-analog converter for detailed audio reproduction from the stereo RCA analog output, and also features an optical and digital coaxial output. The DCD-800NE will play CDs, CD-R/RWs, and MP3, WMA, and AAC files from CDs and USB drives.
Features
Advanced AL32 Processing Plus
This analog waveform reproduction technology utilizes data interpolation algorithms, which support high-resolution audio sources, to add in the points that should exist before and after large quantities of data to smooth out the waveform and restore information lost during the digital recording. This is designed to produce detailed playback that’s free of interference, expressive in the lower range, and faithful to the original sound.
Supports CD, CD-R/RW, MP3, WMA, and USB Playback
Enjoy extended playback support for your high-resolution audio collection. It will play standard CDs as well as CD-R/RWs in audio, MP3, and WMA format; or you can plug in your USB drive to listen to your DSD 2.8/5.6 MHz tracks in high-resolution.
Vibration-Resistant Design for Enhanced Audio
The vibration-resistant design helps mitigate the adverse audio effects of heavy components within amplifiers. The power transformers are installed near the bottom of the CD player and immediately above the insulators to mitigate unwanted vibration.
DAC Master Clock Design
To help the DCD-800NE accurately synchronize digital circuits, it is built with a DAC Master Clock design that treats the DAC as the master when clock signals are supplied. The master clock is immediately adjacent to the DAC, helping to suppress jitter and ensure optimal precision in D/A conversion. It serves as the reference for semiconductor operation and helps optimize digital audio circuitry.
Short Circuit Paths
The circuit patterns of this CD player are engineered to make signal paths as short as possible, helping to reduce interference between circuits and the left and right channels, thereby minimizing the adverse influences on audio signals. This helps provide a clean audio output that’s transparent and faithful to the original recording.
Pure Direct Mode
This mode feeds sound directly to the amplifiers by bypassing any processing that might otherwise color the signal to help output clean, detailed, accurate audio.
Optical and Digital Coaxial Output
The DCD-800NE features one optical and one digital coaxial output to connect to the digital inputs of your amplifier or receiver.
Specifications
Compatibility
| Supported Disc Types | CD, CD-R, CD-RW, Mini-CD |
| Supported Formats | AAC, AIFF, DFF, DSF, FLAC, M4A, MP3, WAV, WMA |
General
| Frequency Response | 2 Hz to 50 kHz -3 dB (DSD) 2 Hz to 50 kHz -3 dB 24-Bit (PCM) 2 Hz to 20 kHz 16-Bit (PCM) |
| Frequency Range | 2 Hz to 100 kHz (DSD) 2 Hz to 96 kHz 24-Bit (PCM) 2 Hz to 20 kHz 16-Bit (PCM) |
| DAC | Burr Brown PCM1795 (192 kHz / 32-Bit) |
| Dynamic Range | 108 dB (DSD) 108 dB (PCM) 101 dB (PCM) |
| Signal to Noise Ratio | 115 dB |
| Max Sample Rate/Resolution | 192 kHz / 32-Bit (PCM) 5.6 MHz / 1-Bit (DSD) |
| Total Harmonic Distortion (THD) | 0.0015% (DSD) 0.002% (24-Bit PCM) 0.0025% (16-Bit PCM) |
| Bit Rates | 48 to 320 kb/s |
| Number of Channels | 2 |
| Maximum Output Voltage | 0.5 Vp-p (Digital Coaxial) 2.2 Vrms |
Connections
| Audio Outputs | 1 x RCA Stereo (L/R) 1 x TOSLINK Optical 1 x Digital Coaxial |
| Audio Inputs | 1 x USB Type-A |
| Other I/O | 1 x 1/8″ / 3.5 mm (IR) Input 1 x 1/8″ / 3.5 mm (IR) Output |
Physical
| Disc Capacity | 1 |
| AC Input Power | 120 VAC, 60 Hz |
| Power Consumption | 28 W (Typical) 0.2 W (Standby) |
| Dimensions (W x H x D) | 17.1 x 10.5 x 4.5″ / 434 x 107 x 275 mm |
| Weight | 9.9 lb / 4.5 kg |
No products in the cart.
Reviews
There are no reviews yet.