View wishlist“QSC Af3082-S-Bk Small Array Frame For Use With Wl3082 And Wl212-Sw; Accommodates Arrays Of Up To Twelve (12) Wl3082Or Two (2) Wl212-Sw And Eight (8) Wl3082Available In Black” has been added to your wishlist
If you're a discerning mixing engineer on a budget, consider the PreSonus Eris E7 XT 2-Way Active Near Field Studio Monitor with Waveguide, a nearfield monitor designed to sound good in any location. Tune the monitor to your specific environment with a bevy of convenient acoustical features, and drive the sound loud and clear. The monitor offers an exceedingly wide sweet spot, and when it comes to connections, you won't need to scrounge around for adapters—this monitor offers RCA, 1/4" TRS, and XLR jacks.The Eris E7 XT provides a 6.5" composite woofer and a 1.25" silk-dome tweeter, through which you can push up to 104 dB of sound. This is about 20 dB more than the recommended standard of 83 dB SPL for studio work, so you're more than covered when it comes to volume.
Building upon the success of the original, the PreSonus Eris E8 XT Two-Way Active 8" Studio Monitor offers the same robust connectivity options with an updated driver combo and a larger ported enclosure. The Hugh Sarvis designed EBM waveguide delivers a wider and more controlled sweet spot, ideal for group listening and collaboration. The E8 XT utilizes 140W Class-AB biamplification to power the 8" woven composite woofer and 1.25" ultra-low-mass, silk-dome high-frequency driver, which combine to deliver up to 105 dB of continuous SPL.
The Temblor T10 Active 10" Studio Subwoofer is designed for low frequency sound reinforcement while monitoring in a recording studio. The subwoofer utilizes a 10-inch composite low frequency driver with a frequency response of 20 to 200 Hz and a maximum SPL of 110 dB. The driver is housed within a heavily braced and reinforced MDF cabinet with a vinyl finish and ported bass reflex design. It is powered by a 250 Watt Class AB plate amplifier. To reduce vibration, the unit features internal dampening and rests on built-in feet. The subwoofer features a variable crossover frequency between 50 and 130 Hz, input gain controls from -30 dB to +6 dB, a 0° or 180° phase switch, and a ground lift switch.
Designed for critical listening in the studio or at home, the PreSonus Temblor T8 Active 8" Studio Subwoofer complements any full-range monitoring system, and is suitable for use in a variety of applications such as music production, gaming, and home theater, and more.
QSC AD-C4T-ZB-WH 4.5" 2-way ceiling loudspeakers deliver clean, full-range audio with a modern zero-bezel design. Ideal for commercial installations, these flush-mount speakers come in white and are sold as a pair.
The black AcousticDesign Series QSC AD-P4T is a transformer-equipped 4.5" pendant-mount loudspeaker voiced to deliver tonal consistency throughout the AcousticDesign range of speakers, making them suitable for 70/100V or 16-ohm operation in a variety of foreground and background music applications.Outfitted with a 4.5" weather-treated woofer and a 0.75" aluminum dome tweeter on a DMT waveguide, the AD-P4T offers broad 150° conical coverage and improved off-axis power while providing a frequency range of 65 Hz to 20 kHz (-10 dB). The speaker is capable of handling 30W RMS and producing a peak maximum SPL of 108 dB.The AD-P4T utilizes a 4-pole Euroblock connector under a sealable input cover for easy wiring and protection from moisture. It features a UV-treated ABS enclosure and a magnetic steel grille with a blemish-free removable logo. Quick-link cable assemblies and slip-lock fasteners are supplied for efficient installation.
The AF3082-L-BK Large Array Frame use with WL3082 and WL212-sw, accomodates arrays of up to twelve (12) WL3082 or four (4) WL212-sw and twelve(12) WL3082. Available in black or white.
Small array frame for use with WL3082 and WL212-sw; accommodates arrays of up to?twelve (12) WL3082 or two (2) WL212-sw and eight (8) WL3082; can also be used in?conjunction with EB3082 to construct arrays with WL212-sw suspended behind WL3082;?available in blackFeatures of the WL3082 WL3082 | WL212-sw
Features
? Extraordinarily compact (only 20_ /508 mm wide) and lightweight(38 lb/17.2 kg)
? High acoustic output (133 dB SPL peak)
? Wide 140? horizontal coverage
? High power, 8_ neodymium LF /MF drivers provide low-frequency extension to 62 Hz without subwoofers
? 3_ diaphragm compression driver on QSC?s patented 140? multiple diffractionaperture waveguide (Patent No. 7,177,437)
? Simple, easy-to-use rigging system supports arrays of up to 12 units with 10:1 design factor
? Flexible ground stack capability
? Fully supported in EASE and EASE Focus acoustic software
? Dual 12_ subwoofer in a 4th order bandpass enclosure
? 135 dB SPL peak output capability
? Frequency range to 32 Hz (-10 dB down point)
? May be suspended at the top of a WL3082 array or behind the array
? Integral suspension hardware also supports WL3082 in ground stack applications
High performance, superior quality and lasting reliability. These are the hallmarks of the QSC brand and the reason why millions of professionals the world-over have come to trust QSC to help them confidently deliver superior experiences and memorable performancesWith each CP12 speaker boasting 1000W of power, the amount of volume that they can project will fill a space of practically any size, with only the finest audio. The CP12 speakers also boast built-in Class-D amplifier modules, with advanced DSP ensuring that your audio is clear, precise and detailed wherever you decide to set these up.
QSC is one of the world?s most popular and highly-regarded manufacturers of PA speakers. Joining their acclaimed product catalogue, the CP series represents the quality and advanced sonics you?d expect from QSC, but in an affordable and more compact package.With each CP8 speaker boasting 1000W of power, the amount of volume that they can project will fill a space of practically any size, with only the finest audio. The CP8 speakers also boast built-in Class-D amplifier modules, with advanced DSP ensuring that your audio is clear, precise and detailed wherever you decide to set these up.
The black QSC E110 is a compact, two-way loudspeaker with a 10 die cast frame woofer with a 2.5 voice-coil, housed in a multi-purpose enclosure for stage monitor or main PA deployment. It incorporates QSC DMT (Directivity Matched Transition) design with an 85? wide coverage. When used as a stage monitor, the E110 loudspeaker is angled up at 55?, allowing it to be placed near the performer when used on a crowded stage.An all metal, dual angle, 35mm socket allows the loudspeaker to be mounted vertically on a pole or angled down by 10 to improve audience coverage and reduce rear wall reflections. Multiple mounting options using E-Series Yoke or M8 eyebolts (sold separately) are supported. Input connections include dual NL4 as well as screw terminal receptacles.
The black QSC E112 is a trapezoidal, two-way loudspeaker, well suited for sound reinforcement applications including live performance, DJ and dance music, karaoke, and event production. The E112 requires an amplifier with a minimum of 400W continuous (1600W peak) to power the 12" woofer and 1" compression driver that combine to offer a frequency response of 64 Hz to 20 kHz (-6 dB) with a peak SPL of 128 dB. QSC recommends the use of a DSP speaker processor or a power amplifier with integrated DSP in order to set crossovers, limiting, and equalization to ensure the best performance. QSC's GXD or PLD amplifiers, as well as TouchMix digital mixers offer on-board DSP and factory-tuned presets, which provide settings for live sound reinforcement (with and without subwoofers), stage monitoring, dance music, and karaoke.
The black QSC E115 is a trapezoidal, two-way loudspeaker, well suited for sound reinforcement applications including live performance, DJ and dance music, karaoke, and event production. The E115 requires an amplifier with a minimum of 500W continuous (2000W peak) to power the 15.0" woofer and 1.5" compression driver that combine to offer a frequency response of 55 Hz to 20 kHz (-6 dB) with a peak SPL 130 dB. QSC recommends the use of a speaker processor or a power amplifier with integrated DSP in order to set crossovers, limiting, and equalization to ensure the best performance. QSC's GXD or PLD amplifiers, as well as TouchMix digital mixers offer on-board DSP and factory-tuned presets, which provide settings for live sound reinforcement (with and without subwoofers), stage monitoring, dance music, and karaoke.
The black QSC E118SW Passive Subwoofer is a high-performance direct radiation subwoofer, well suited for sound reinforcement applications including live performance, DJ and dance music, karaoke, and event production. The E118SW requires an amplifier with a minimum of 800W continuous (3200W peak) to power the 18" woofer, which offers a frequency response of 37 to 230 Hz (-6 dB) with a peak SPL 133 dB.QSC recommends the use of a speaker processor or a power amplifier with integrated DSP in order to set crossovers, limiting, and equalization to ensure the best performance. QSC's GXD or PLD amplifiers, as well as TouchMix digital mixers offer on-board DSP and factory-tuned presets, which provide settings for live sound reinforcement, stage monitoring, dance music, and karaoke.The rugged plywood enclosure is coated in black textured paint and features a heavy-duty grille lined with foam for protection. A threaded, M20 pole socket and speaker pole are provided for sub/satellite use with any of the E-Series two-way full-range loudspeakers. For portable applications, the E118SW includes attachment points for four optional casters.
800W continuous, 3200W peak
E-Series Entertainment System offers advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers
Foam-lined perforated steel grille
Constructed of rugged plywood and coated in black, textured paint
The?E215?from?QSC?is a high-output 2-way loudspeaker featuring dual 15" woofers and a 1.5" high-frequency driver that combine to offer a frequency range of 39 Hz to 20 kHz with an SPL of 134 dB. Each 15" woofer is made with a die-cast aluminum frame and 3.5" voice coil, while the high-frequency compression driver utilizes a titanium diaphragm with a 2.8" voice coil and a 1.5" exit. The speaker offers a power handling capability of 1000W continuous and 4000W peak with a 75? conical dispersion.The enclosure is made from 11-ply plywood with a black textured paint finish and a perforated, powder-coated steel grille with foam lining. For connections, the rear panel offers two NL4 and one barrier strip connectors. The optional custom-fit padded cover offers protection during transportation, while the optional M10 rigging kit provides hanging options for permanent installations.
The?E218SW?from?QSC?is a direct radiating subwoofer featuring dual 18" woofers that offer a frequency range of 32 to 230 Hz with an SPL of 136 dB. Each 18" woofer is made with a die-cast aluminum frame and 4" voice coil that when combined, offer a power handling capability of 1200W continuous and 4800W peak.The enclosure is made from 11-ply plywood with a black textured paint finish and a perforated, powder-coated steel grille with foam lining. For connections, the rear panel offers two NL4 and one barrier strip connectors. The optional custom-fit padded cover offers protection during transportation and an optional caster kit provides greater portability.
The QSC EB3082-BK Extension Bar used in conjunction with two (2) AF3082-S array frames allows arrays of WL212-SW subwoofers to be suspended behind arrays of WL3082 line array modules. It required for system with the subwoofers flown behind the main array.
The K10.2 is a 2-way active 10_ speaker?equipped with a 2000-watt power module?carefully?matched?to high-performance woofers and compression drivers.?DMT? (Directivity-Matched?Transition) ensures?smooth?coverage across the entire listening area. Advanced on-board DSP provides Intrinsic Correction??voicing?and?advanced?system management?to further optimize?performance.Superbly?flexible, the K10.2 provides a library of preset?contours?for common applications such as Stage Monitor, Dance?Music,?Musical Instrument Amplification, Hand-held Microphone and more, while also offering?storable Scenes?to recall user-configurable?settings such as?input type,?delay,?EQ,?cross-over and?selected?contour.?Operated as either main PA or as a floor monitor, the speakers?can also be flown, wall??or truss-mounted,?or?placed?on a speaker pole,either?straight-firing?or?with?7.5-degree down-tilt.
The QSC K.2 Series represents the best-inclass loudspeaker for today?s demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications.The QSC K.2 Series is quite simply, the next standard in powered loudspeakers. To start, each model is equipped with a 2000-watt power module carefully matched to high-performance woofers and compression drivers. DMT? (Directivity-Matched Transition) ensures smooth coverage across the entire listening area. Advanced on-board DSP provides Intrinsic Correction? voicing and advanced system management to further optimize performance.The K.2 Series can function as either the Main PA or as a Floor Monitor. Each model can also be flown, wall- or truss-mounted or placed on a speaker pole, either straight-firing or with 7.5 degree down-tilt. This flexibility makes it a smart choice for a wide range of live sound applications.Superbly flexible, the K.2 Series provides its operators with a library of preset contours for common applications such as Stage Monitor, Dance Music, Musical Instrument Amplification, Hand-held Microphone and more, while also offering storable Scenes to recall user-configurable settings such as input type, delay, EQ, cross-over and selected contour. Operated as either main PA or as a floor monitor, each model can also be flown, wall- or truss-mounted, or placed on a speaker pole, either straight-firing or with 7.5-degree down-tilt.
The QSC K.2 Series is quite simply, the next standard in powered loudspeakers. To start, each model is equipped with a 2000-watt power module carefully matched to high-performance woofers and compression drivers. DMT? (Directivity-Matched Transition) ensures smooth coverage across the entire listening area. Advanced on-board DSP provides Intrinsic Correction? voicing and advanced system management to further optimize performance.The K.2 Series can function as either the Main PA or as a Floor Monitor. Each model can also be flown, wall- or truss-mounted or placed on a speaker pole, either straight-firing or with 7.5 degree down-tilt. This flexibility makes it a smart choice for a wide range of live sound applications.Superbly flexible, the K.2 Series provides its operators with a library of preset contours for common applications such as Stage Monitor, Dance Music, Musical Instrument Amplification, Hand-held Microphone and more, while also offering storable Scenes to recall user-configurable settings such as input type, delay, EQ, cross-over and selected contour. Operated as either main PA or as a floor monitor, each model can also be flown, wall- or truss-mounted, or placed on a speaker pole, either straight-firing or with 7.5-degree down-tilt.
The KLA12 12" 2-Way Line Array Loudspeaker (Black) is a compact speaker designed to be used as part of a speaker array system. The speaker features a rugged ABS plastic enclosure that provides lasting durability in a lightweight package. The speaker has a 12" woofer and a 1.75" compression tweeter to provide crisp, detailed sound reproduction with a wide frequency response. An efficient 500W x 500W power amp module provides clear, strong audio. The efficient design allows up to 5 KLA models to be driven from a single 120VAC 15 amp electrical circuit.The speaker has QSC's DEEP DSP algorithm, which provides extended bass by actively managing low-frequency transients. GuardRail protection circuitry prevents the amplifier module from unnatural and destructive clipping. An auto-standby mode will auto-engage after 5 minutes of inactivity to save energy. XLR and PowerCon input and thru connectors provide connection versatility, while a Phoenix connector allows daisy-chaining.
The?KLA12 12" 2-Way Line Array Loudspeaker (White)?is a compact speaker designed to be used as part of a speaker array system. The speaker features a rugged ABS plastic enclosure that provides lasting durability in a lightweight package. The speaker has a 12" woofer and a 1.75" compression tweeter to provide crisp, detailed sound reproduction with a wide frequency response. An efficient 500W x 500W power amp module provides clear, strong audio. The efficient design allows up to 5 KLA models to be driven from a single 120VAC 15 amp electrical circuit.The speaker has QSC's DEEP DSP algorithm, which provides extended bass by actively managing low-frequency transients. GuardRail protection circuitry prevents the amplifier module from unnatural and destructive clipping. An auto-standby mode will auto-engage after 5 minutes of inactivity to save energy. XLR and PowerCon input and thru connectors provide connection versatility, while a Phoenix connector allows daisy-chaining.The speaker is expressly designed for use in fixed arcuate line arrays, and has a 12:1 design factor with a 90 x 18? coverage pattern, allowing up to 5 units to be configured for 90 x 90? coverage. Most other systems require 6 units for the same coverage pattern. The KLA12's SOLO (Single-Operator Logistics) Rigging System allows you to easily assemble and disassemble the line array in a short amount of time without special tools or external hardware.
The black KLA181 1,000-Watt Subwoofer from QSC is designed to be used in the KLA series fixed line array system. It can reproduce frequencies down to 33 Hz and produces up to 1000 watts of output. The KLA181 has an integrated threaded pole-cup receptacle that allows you to pole-mount up to 2 KLA12 speakers on top of it for array setup. Its M10 fittings allow it to alternatively be suspension mounted.
The QSC KLA181 Line Array Subwoofer is an 18" active subwoofer and is designed to compliment QSC's KLA12 2-Way Line Array Loud Speaker. The KLA 181 features an energy efficient 1000 watt power module. A polarity switch controls low frequency directivity and its pole receptacle is capable of mounting up to 2 KLA12 2-Way Line Array Loud Speakers.QSC's DEEP DSP algorithm provides extended bass by actively managing low-frequency transients. GuardRail protection circuitry prevents the amplifier module from unnatural and destructive clipping. An auto-standby mode will auto-engage after 5 minutes of inactivity to save energy. XLR and PowerCon input and thru connectors provide connection versatility, while a Phoenix connector allows daisy-chaining.
The KW122 from QSC is a professional-quality active 2-way PA loudspeaker that can also be used as a stage monitor speaker. Ideal for music and speech applications, the lightweight and rugged birch cabinet houses a 12" woofer and a 1.75" compression tweeter to deliver crisp, natural audio with a wide frequency response. A pair of efficient Class-D amplifiers provide a combined power of 1000W for strong audio with low distortion. Directivity Matched Transition technology provides matched low and high frequency coverage across your entire listening area to eliminate "dead" and "hot" zones.The speaker offers excellent connectivity, with XLR/TRS combo inputs and line-level RCA inputs for accepting a variety of sound sources. Up to 3 audio sources can be mixed internally and sent to the outputs. Direct XLR outputs are provided for each channel, as well as a mix output for daisy-chaining. Extensive internal DSP includes Intrinsic Correction, DEEP, and GuardRail technologies to provide terrific sonic clarity and component protection for reliable operation.Onboard control options allow you to adjust EQ to perfectly match your surroundings and applications. You can also use the rear-panel Phoenix connector to connect an external potentiometer (not included) for remote gain control. The speaker has a standard 35mm pole socket with Tilt-Direct technology. This technology lets you simply turn a dial to give the speaker a 7.5? downward tilt to maintain maximum coverage from high mounting positions. The cabinet has integrated M10 suspension points for easy installation as well as ergonomic cast-aluminum handles for easy transport.
The KW152 from QSC is a professional-quality active 2-way PA loudspeaker. Ideal for music and speech applications, the lightweight and rugged birch cabinet houses a 15" woofer and a 1.75" compression tweeter to deliver crisp, natural audio with a wide frequency response. A pair of efficient Class-D amplifiers provide a combined power of 1000W for strong audio with low distortion. Directivity Matched Transition technology provides matched low and high frequency coverage across your entire listening area to eliminate "dead" and "hot" zones.The speaker offers excellent connectivity, with XLR/TRS combo inputs and line-level RCA inputs for accepting a variety of sound sources. Up to 3 audio sources can be mixed internally and sent to the outputs. Direct XLR outputs are provided for each channel, as well as a mix output for daisy-chaining. Extensive internal DSP includes Intrinsic Correction, DEEP, and GuardRail technologies to provide terrific sonic clarity and component protection for reliable operation.Onboard control options allow you to adjust EQ to perfectly match your surroundings and applications. You can also use the rear-panel Phoenix connector to connect an external potentiometer (not included) for remote gain control. The speaker has a standard 35mm pole socket with Tilt-Direct technology. This technology lets you simply turn a dial to give the speaker a 7.5? downward tilt to maintain maximum coverage from high mounting positions. The cabinet has integrated M10 suspension points for easy installation as well as ergonomic cast-aluminum handles for easy transport.
The KW153 from QSC is a professional-quality active 3-way PA loudspeaker. Ideal for music and speech applications, the lightweight and rugged birch cabinet houses a 15" woofer, a 6.5" midrange driver, and a 1.75" compression tweeter to deliver crisp, natural audio with a wide frequency response. A pair of efficient Class-D amplifiers provide a combined power of 1000W for strong audio with low distortion. Directivity Matched Transition technology provides matched low and high frequency coverage across your entire listening area to eliminate "dead" and "hot" zones.The speaker offers excellent connectivity, with XLR/TRS combo inputs and line-level RCA inputs for accepting a variety of sound sources. Up to 3 audio sources can be mixed internally and sent to the outputs. Direct XLR outputs are provided for each channel, as well as a mix output for daisy-chaining. Extensive internal DSP includes Intrinsic Correction, DEEP, and GuardRail technologies to provide terrific sonic clarity and component protection for reliable operation.Onboard control options allow you to adjust EQ to perfectly match your surroundings and applications. You can also use the rear-panel Phoenix connector to connect an external potentiometer (not included) for remote gain control. The speaker has a standard 35mm pole socket and integrated M10 suspension points for easy mounting and installation. It also has ergonomic cast-aluminum handles for easy transport.
The QSC LA112 is a 12-inch active two-way line array loudspeaker delivering powerful, clear sound for live events, installations, and touring applications. Featuring advanced DSP and the QSC FastRigâ„¢ system, it ensures quick setup and precise coverage every time.
The QSC LA112-AF is a durable rigging frame designed for LA112 12" Active Line Array Loudspeakers, enabling quick, secure assembly and flexible array configurations for live events, installations, and touring setups.
The PB3082 pullback bar is used for pulling back the bottom element of the array for aiming and stability or as the primary suspension component for certain small arrays. Available in black or white.
Line arrays are increasingly employed in a wider range of venues and applications. Frequently these venues have height or sightline restrictions that limit the placement and size of the array. Rising fuel costs are putting pressure on touring system providers to downsize their transportation requirements. At the same time, client and audience expectations for audio performance has never been higher. To meet these needs, QSC embarked on a program to develop the most compact, highest output line array speaker system available. QSC?s WideLine-8 packs full size line array performance into an ultra compact package measuring less than 20_ (508 mm) wide and 9_(229 mm) high. The WideLine-8 applies to audio the classic hot rod, highperformance formula ? putting the most horsepower available into the smallest chassis possible.Each tri-amplified WideLine-8 element uses a pair of high-power,neodymium magnet, 8_ low-frequency drivers. Both cover low frequencies while only one extends into the mid range, thus maintaining horizontaldispersion control at crossover. High frequencies are handled by a premium, 3_ diaphragm, neodymium compression driver mounted to QSC?s patented, 140? multiple aperture diffraction waveguide. WideLine signature wide coverage delivers a broader stereo image, reduces the need for supplemental fill speakers and allows more placement options.The waveguide exit extends nearly to the top and bottom of the enclosure to
create a continuous acoustical source with minimal discontinuities between adjacent elements resulting in greatly reduced destructive interaction.
RCF's 15" 800W Weatherproof 2-Way Speaker System is a weatherproof bass reflex subwoofer equipped with a 15" low frequency neodymium transducer with 4" voice coil. This woofer offers enough power and efficiency for a variety of professional outdoor or indoor applications.This woofer has been specifically designed to reinforce sub bass frequencies in RCF P Series speaker array systems.The cabinet is a single-piece, rotational molded in medium-density polyethylene, and is fully UV protected. The cabinet is equipped with 12 x M10 brass inserts, a stainless steel U-Bracket, and a pair of spacers for 90° mounting. The front logo is in aluminum with open-cell fibers and water repellent fabric backing. This woofer is suitable for indoor and outdoor applications/installations and meets the requirements of IP55.
RCF's 8" 300W Weatherproof 2-Way Speaker System is a weatherproof, full-range, wide-dispersion, coaxial two-way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.The high-frequency section is a constant directivity CMD horn loaded with a 1" RCF precision compression driver with a 1.5" diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is an 8" woofer with a 2.5" voice coil. The cabinet is a single piece rotational molded in medium density polyethylene and is fully UV protected.The cabinet is equipped with 4 x M 8 brass inserts, a stainless steel U-Bracket. The front logo is in aluminum and rotatable.The grille is in custom perforated aluminum with open-cell fibers and water-repellent woven fabric backing. The system meets the requirements of IP55 code.
Designed to deliver stellar audio performance and versatility for intensive audio applications, the 10"Â RCF ART 910-AÂ is a highly flexible, easy to use, 2100W powered PA speaker for today's working musicians, singer/songwriters, mobile DJs, and other sound providers. The speaker works in a variety of orientations and configurations for use as a main PA or stage monitor. When used as a main speaker, a pair of ART 910-A's is well equipped to cover an audience of up to 300.A push button on the back of the speaker allows you to physically switch between three preset modes: Linear, for standard applications; Boost, which provides loudness equalization for background music played at low volumes; and Stage, for using the speaker as a stage monitor. The ART 910-A employs True Resistive Waveguide technology, which incorporates several refinements of the transducers and the vented port design to create a resonance-free signal that reduces high-frequency distortion. The speaker also utilizes Bass Motion Control (BMC), which bypasses the need for a high-pass filter and instead uses an advanced woofer excursion management feature that can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.
Designed to deliver stellar audio performance and versatility for intensive audio applications, the 12"Â RCF ART 912-AÂ is a highly flexible, easy to use, 2100W powered PA speaker for today's working musicians, singer/songwriters, mobile DJs, and other sound providers. The speaker works in a variety of orientations and configurations for use as a main PA or stage monitor. When used as a main speaker, a pair of ART 912-A's is well equipped to cover an audience of up to 300.A push button on the back of the speaker allows you to physically switch between three preset modes: Linear, for standard applications; Boost, which provides loudness equalization for background music played at low volumes; and Stage, for using the speaker as a stage monitor. The ART 912-A employs True Resistive Waveguide technology, which incorporates several refinements of the transducers and the vented port design to create a resonance-free signal that reduces high-frequency distortion. The speaker also utilizes Bass Motion Control (BMC), which bypasses the need for a high-pass filter and instead uses an advanced woofer excursion management feature that can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.A single combo XLR-1/4" connector can accept both unbalanced and balanced signals. There is also an XLR Thru-Output for daisy-chaining to additional speakers or other audio equipment. The highly efficient 2100W Class-D bi-amplifier delivers 1400W to the 12" woofer and 700W to the 1.75" compression driver, which provide full-range audio (50 Hz to 20 kHz) with a sound pressure level powerful enough to ensure the entire audience can hear your performance. The ART 912-A includes a power cord.
ART 932-A is a high-performance professional active speaker delivering up to 132 dB SPL with 2100W Class-D amplification, ideal for both live and installed sound applications.
High-performance 2-way active speaker with 2100W power output, advanced DSP processing, and pristine sound quality for live events and professional audio setups.
ART 945-A is a high-performance professional active speaker delivering up to 135 dB SPL with a 2100W Class-D amplifier, a 4" titanium/neodymium compression driver, and advanced DSP technologies for precise, powerful sound in demanding live or installed environments.
ART 708-A MK5 is a powerful 8" active two-way speaker delivering up to 128 dB SPL and 1400W peak power, equipped with advanced DSP, FiRPHASE filtering, and XBOOST bass enhancement for clear and controlled sound projection.
ART 710-A MK5 is a high-performance 10" active two-way speaker with 129 dB SPL and 1400W peak power, featuring advanced DSP, FiRPHASE filtering, and XBOOST low-frequency enhancement for clean, powerful sound and superior vocal clarity.
ART 712-A MK5 is a powerful 12" active two-way speaker with 129 dB SPL and 1400W peak power, combining RCF's FiRPHASE technology, XBOOST low-frequency enhancement, and advanced DSP for superior clarity, projection, and bass performance.
ART 715-A MK5 is a high-power 15" active two-way speaker delivering 130 dB SPL and 1400W peak output, featuring FiRPHASE and XBOOST technologies, precise DSP control, and RCFÂ’s renowned transducer engineering for superior projection and deep bass.
ART 732-A MK5 is a high-definition 12" active two-way speaker offering 131 dB SPL and 1400W peak power. Featuring a 3” titanium diaphragm compression driver, neodymium transducers, XBOOST bass enhancer, and FiRPHASE technology, it's designed for professional clarity and impactful performance.
ART 735-A MK5 is a 1400W, 2-way active speaker with a 15" woofer and a 3" titanium compression driver. Delivering 132 dB SPL and powered by Class-D amplification with FiRPHASE and XBOOST, it ensures clear highs, deep lows, and uncompromising stage reliability.
RCF ART 745-A MK5 is a high-performance 2-way active speaker, featuring a 4" titanium diaphragm compression driver, 15" neodymium woofer, 1400W peak power, and advanced DSP with FiRPHASE and XBOOST technologies.
The RCF ART 915-A is a professional-grade active PA speaker featuring a powerful 15" woofer and 1.75" compression driver, delivering up to 2100W peak power. Equipped with advanced DSP, including FIRPHASE and Bass Motion Control, it ensures precise, high-definition sound with deep bass and wide coverage. Ideal for live sound, DJs, and installations.
Designed to deliver stellar audio performance and versatility for intensive audio applications, the 12"Â RCF ART 912-AXÂ is a highly flexible, easy to use, 2100W powered PA speaker with Bluetooth and a built-in 6-channel digital mixer for today's working musicians, singer/songwriters, mobile DJs, and other sound providers. The advanced user interface features a built-in touch panel and Bluetooth remote control, which allow you to set up and control the mix wirelessly using your favorite portable device.The ART 912-AX employs True Resistive Waveguide technology, which incorporates several refinements of the transducers and the vented port design to create a resonance-free signal that reduces high-frequency distortion. The speaker also utilizes Bass Motion Control (BMC), which bypasses the need for a high-pass filter and instead uses an advanced woofer excursion management feature that can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The highly efficient 2100W Class-D bi-amplifier delivers 1400W to the 12" woofer and 700W to the 1.75" compression driver, which provide full-range audio (50 Hz to 20 kHz) with a sound pressure level powerful enough to ensure the entire audience can hear your performance. The ART 912-AX includes a power cord.
No products in the cart.