The dbx DriveRack 260 Loudspeaker Management System is a processor designed for complete system control of equalization, dynamics, and routing possibilities in live or contractor sound applications. Its powerful processing includes both a linkable 28-band graphic and a 9-band parametric EQ, while system dynamics are controlled by the built-in compressor. Further component protection is provided by DBX's PeakStopPlus limiters, which help protect against too much power and sudden transient spikes.
Before users adjust the EQ, they may want to utilize the internal pink noise generator and real time analyzer to get familiar with the room acoustics. In addition, an easy to assign, flexible alignment time delay and handy 15V phantom powered mic input are also provided for further room management and control.
The goal of a high-quality control processor is to help "dial in" a room and contribute to the overall system performance without directly interfering with audio integrity. Custom templates are built-in for specific amplifier and speaker combinations with user setups easily adjusted using the Wizard setup system and complete DriveWare GUI control.
An outstanding tool for maximizing audio quality in a number of environments, the DriveRack 260 is derived from an already proven series of processors and continues the tradition of providing flexible system control using simple, intuitive interfaces.
The DriveRack VENU360 from dbx is a loudspeaker-management processor designed to protect and optimize front-of-the house, stage monitor, delay-fill, and zone loudspeaker systems in clubs, outdoor music events, or houses of worship.
Connect the VENU360 between your mixer and amplifiers/powered speakers, and use it for precise feedback elimination, automatic speaker level and room equalization, crossover-frequency setting, dbx compression/limiting, driver alignment delay, and more.
The unit provides a 5 x 6 routing/mixing matrix (using four AES signals and one analog signal) and a 3 x 6 signal processing chain. The 24-bit A/D and D/A converters with dbx Type IV conversion protect the incoming audio signal from accidental digital clipping at the A/D stage, while the 32-bit floating point, 48 / 96 kHz internal processing produces professional audio quality with high headroom and wide dynamic range.
The PB-48 is a patchbay that just works, all the time, every time. It comes in two flavors: half-normalled or de-normalled, with 48 1/4" points on the front panel, connected to 48 1/4" points on the rear. The PB-48 is a rugged, noise-free, versatile patchbay designed to serve all your patchbay needs, from providing clear and easy access to your mixer and other studio gear, to reducing the wear and tear on their jacks, to facilitating quick and precise rerouting of devices within your studio setup.
The PMC16 is a 16 channel personal monitor controller which allows the user to create a custom mix from 16 channels of audio. Designed to be used with the dbx TR1616 or any other BLU link compatible device, the PMC16 allows for monitoring with headphones, in-ear monitors, powered monitors, or traditional wedge monitors. Multiple PMC16s can be daisy chained using CAT5e cable allowing each user to receive 16 channels of high-resolution digital audio and create their own personalized mix to suit their monitoring needs. The PMC16 comprises a 16 channel mixer section with full control of levels, panning, effect send levels, muting, and soloing. Onboard Lexicon© reverb provides the finishing touch. The PMC16’s output processing section includes: stereo width control, wedge monitor compensation EQ, high and low master EQ, master level control, and dbx limiting. With a Setup Wizard for ease of configuration, full 16 channel level metering, channel grouping, 16 preset locations for future recall of configurations and mixes, and an intuitive yet powerful user interface, PMC16 gives you the power to dial in YOUR mix exactly as YOU want it, in real time.
The dbx ZonePRO 640m is a digital zone processor with a fixed I/O, preconfigured architecture, configurable insert processing, and optional duplication of audio to an additional ZonePRO device via a link bus.
The unit features six inputs with four balanced mic/line switchable terminal block inputs and two unbalanced, mono-summed RCA input pairs. There is hardware-controlled microphone gain per channel. The pre-configured architecture has input processing with a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.
The Denon DJ LC6000E is a professional-grade USB MIDI sub-controller designed to enhance your DJ setup. It offers seamless integration with Engine DJ, Serato, and Virtual DJ software, providing tactile control and an intuitive interface for DJs seeking to elevate their mixing experience. With its robust build and versatile features, the LC6000E is ideal for both standalone and laptop-based DJ workflows.
The Denon DJ Prime GO+ is a portable, battery-powered standalone DJ controller with a 7" touchscreen, Wi-Fi streaming, and Bluetooth connectivity. Ideal for mobile DJs, it delivers pro-level performance with no laptop required and up to 4 hours of playtime on a single charge.
The Denon DJ SC5000 Prime is a high-definition digital DJ media player with a 7" high-contrast multi-touch display and latency-free tactile navigation, load, and playback functionality. The dual layer playback engine acts like two separate players in one, complete with separate audio outputs. Additionally, the player is capable of on-board music file analysis, which allows you to add cue points, loop start and end points, and more while working on-the-fly.
The SC5000 utilizes a dedicated multi-core internal processor to run "Engine Prime", Denon DJ's latest music librarian software and features direct access to convenient performance features. The 8" touch-reactive jog wheel features a central display for displaying either the current playing track's artwork, custom artwork, or artist logo. The player also includes eight multi-function trigger pads that deliver creative expression for your hot cues, loops, slices, roll playback with every performance locked to the super accurate beat-grid analysis.
No products in the cart.
