Amplifiers

The new IRONHEART  2 x 12" combo - the IRT60-212 bangs out 60 watts RMS of all ECC83 & 6L6 valve tone with masses of gain and like its metal relatives - such as the Laney KLIPP and the Laney AOR hits you hard between the eyes like a power hammer from hell!

The Combo houses three sonically distinct channels: - Clean, Rhythm & Lead all with independent level controls. The Clean and the Rhythm channels share a 3- band EQ with pull-push shift features on each control that gives you total control over your sound allowing you to dial in that killer tone. 

The IRT60-212's Lead channel has an independent 3- band EQ with pull-push shift features on each control allowing for some radical lead tones.

The Pre Boost feature makes the need to carry additional boost pedals redundant! Something any gigging player will admit is a great feature.  On the IRT60-212 the footswitchable Pre Boost works just like kicking in your favourite boost pedal right before your amp.  It's available where ever you are on the preamp and can be switched in or out via the supplied footswitch.

A standout feature of the IRT60-212 range is the WATTS control in the master section.  This allows you to really screw down the output of the IRT60-212's 2 x 6L6 output section, down to less than 1 watt!  Great for getting the sound of a full -blown metal head at bedroom levels.

Combine this with a Dynamics control which tightens up you low end when you're playing a full power and you have a great metal tone at whatever level you decide to play at.

The Tone control works really effectively and allows you to make quick adjustments to your overall sound should you for example change guitars.

The Laney Ironheart IRT60H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It's loaded with a pair of premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone.

One of the coolest features of the IRT60H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You'll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.

The L20T-112 combo features the same highly respected preamp design as the rest of the Lionheart range and consists of a clean and drive section with shared 3 band EQ, global reverb and an overall tone control.

The L20T-112's all valve power amp houses a road tested 20 Watt Class A parallel single ended EL84 equipped output section, not previously seen in a Lionheart 1 x 12 combo. This offers the player an increased headroom option in a combo whilst still giving masses of vintage valve tone in a compact stylish package.

The rear panel of the L20T-112 features a footswitch socket for switching channel and reverb with the FS2 provided, an FX loop for connecting external FX devices and finally an external speaker socket for adding an additional speaker enclosure such as the LT212. The L20T-112 also features the innovative folding tilt mechanism that has proved popular on the rest of the Lionheart range.

The L20T-112 can sound either vintage or modern depending on how you use the preamp controls - back off the gain, wind up the master and you're cooking up serious retro tone. Digging in hard produces extra bite, or backing off cleans it all up.

The Lionheart range is a significant amplifier in todays market offering serious tone that's often difficult to find even in products costing twice the price. Lionhearts are easy to use and most players will get a great tone out of them within seconds.

Designed and engineered to compliment the L50H’s sonic output each L412 is manufactured from high-grade premium marine plywood and loaded with 4 12” Celestion G12 Heritage drivers which together deliver 120 RMS of great vintage tone.

Finished in the same Marine Blue/Beige livery as the L50H and the rest of the Lionheart range the L412 comes with castors as standard and a protective embroidered slipcover.

Quality speaker cabs from 1x12 to 2x12 to 4x12 quad boxes. Loaded with everything from greenback Celestions® to high quality Fane® speakers. Ibanez, Engl, Hiwatt, and Hughes and Kettner produce professional speaker cabs for all musicians.

The LA65D houses a twin channel pre-amp that’s packed with features – Channel 1 takes care of a mic input, additional guitar or keyboard. You then have a gain control, independent Lo & Hi EQ and an independent reverb control. Channel 2 takes a similar format to that of the LA35C adding a Pre shape option – for an instant natural mid cut plus bass & treble boost, a phase switch, along with digital chorus and reverb, plus a SHIMMER feature – allowing you to emphasise the sparkly bright sound of the onboard chorus.

The rear of the unit houses a headphone socket, XLR DI out with a ground lift switch to eliminate ground loop hum and FX loop send and return with switchable level/by-pass switch. Finally a footswitch socket allows remote controlling of the chorus and reverb.

The LA65D handles anything plugged into it with ease, be it a regular 6 string dreadnought or parlour, nylon or 12 string, more than anything else what really impressed me was the clarity and definition of the overall sound. Nothing was lost from the natural guitars tone – everything was there, present and correct.

The LA65D range is extremely accurate, detailed and produces an uncomplicated acoustic sound.

The twin channel LV100 is Laney's entry level LV amplifier. It has a 65 watt output section, independent EQ for each channel, footswitchable reverb, speaker out socket, "V" scoop, and VTS tone shaping. It also features the Laney Tube Emulation Circuitry. Laney - Power To The Music.

There's nothing quite like the sound of a tube. That's why the Laney LV200 features an ECC83 placed at just the right point in the signal path for that dynamic response to your playing that only a tube can give. Couple this with a 65 watt output stage to allow you to release your creativity without compromising volume. Laney - Power To The Music.

The LV412 cabinet is the ideal speaker enclosure for use with the LV range of Laney amplification. You're able to drive 200 watts into the 4x12" Celestion Rocket 50's, and this particular cab is wired for 8 ohms. The LV412A has an angled front.

Celestion Rocket 50's, and this particular cab is wired for 8 ohms. The LV412A has an angled front. The LV412 cabinet is the ideal speaker enclosure for use with the LV range of Laney amplification.

The Laney LX120RT is a highly versatile twin combo, featuring a huge 120 watt output section that can drive into 4 ohms. The Laney LX120RT also features separate EQ for each channel, line out socket, FX loop, speaker output, CD input and onboard high quality reverb. With all these goodies under the hood, it really does deliver the goods. Specification Power: 120W Two channels Single input Speakers: 2x12" HH Controls: 3-band EQ, drive, reverb, volume Built-in reverb FX loop Aux. input Output: 8 ohm, 1/4" Dimensions: 17.83" x 26.53" x 10.74 Weight: 40.78 lb.

The NEXUS N210 cabinet is an ultra-light, high performance bass enclosure, loaded with neodymium drivers and finished in Laney's Tuffstuff coating, the NEXUS N210 has been designed to be used in conjunction with the NEXUS-SL and SLS bass head.

The N210 is loaded with a LaVoce neodymium 15” driver plus a La Voce 1" exit compression driver which is switchable to on/off and half power settings. Selected exclusively for the NEXUS range, these Italian-designed speaker components are truly outstanding for bass.

The lightweight, heavy duty, plywood cabinet is then finished in Laney's Tuffstuff: An incredibly tough, ultra-durable and resilient polyurethane coating designed to deal with the rigours of life on the road.

The Nexus N410 Cabinet is an ultra-light, high performance bass enclosure, loaded with neodymium drivers and finished in Laney Tuffstuff coating, The Nexus N410 has been designed to be used in conjunction with the nexus-sl and SLS bass head. The N410 is loaded with 4 x lavoce neodymium 10” drivers Plus a La Voce 1" Exit compression driver which is switchable to on/off and half power settings. Selected exclusively for the Nexus range, These Italian-designed speaker components are truly outstanding for bass. The lightweight, heavy duty, plywood cabinet is then finished in Laney Tuffstuff: an incredibly tough, ultra-durable and resilient polyurethane coating designed to deal with the rigors of life on the road.

This is before you get to the back panel and you realise you also have a powerful D.I Out, USB out, Headphone Out, Aux In, FX Loop, Tuner out, Remote footswitch control and a single speakon out to go to your cab of choice. All of these IO options are extremely useful at one time or another so having them all in one small amp is like a dream come true for a lot of players.

500W may not sound like a lot compared to the 1000w+ Class D amps that are now available but thanks to that tube stage in the power amp and a really efficient output you get a lot of volume out of that 500w. This will easily have enough power to get you through everything from local club and pub gigs to festival stages and more.

The Laney Richter 800 is a compact, high-efficiency bass enclosure is designed to be the ideal extension cabinet for the Laney R500H. Designed for the bass player who wants more mid range punch on stage the R410's compact design makes it ideal for small stages and easy transport. Whatever your gig the R410 will deliver the performance you are looking for.

Flexibility is key for the modern day bass player and the Richter range is perfect at adapting to your every genre or style. Suitable for seasoned professionals or new beginners, the Richter bass range offers premium quality bass tones that resonate beautifully. Whatever your requirements you can be sure that the Richter range will consistently deliver fantastic results.

The RB6 offers 165 watts RMS of deep bass tone into a 15” Custom designed driver plus a switchable horn and features a smart Metallic grey control panels, clearly laid out allowing quick understanding and easy access to sounds, housing ‘chrome’ knobs with white pointers to assist the user during darker moments on stage.

A serious bass players combo: The Richter RB8 offers a 300 watt output stage, 15" custom Celestion speaker, switchable HF horn, bass, treble and 7 band graphic mid, switchable compressor and switchable limiter in a road-ready cabinet with top and side handles. Laney - Power To The Music