Amplifiers

2 x EL84 power tubes combine with 3 x ECC83/12AX7 pre-amp tubes to deliver 15W RMS power with natural drive and warmth. Opt for either the full 15 watts RMS power or <1W power. <1W is ideal for recording and practice without sacrificing tone; 15W allows for stage-ready volume levels. HH custom-designed 12” drivers with open-back cabinet speakers for dynamic, responsive interaction with tube amplifier; integrated tilt stand under the cabinet enhances projection and tonal variation. Independent Gain and Volume control allows preamp drive to be balanced with the output level, progressing from warm cleans to rich overdrives. 3-band tone stack with Bass, Middle and Treble controls; ‘Tone’ control the overall top-end response, reduce upper-end harmonics on the output and pre-amplifier overdrive.

The Laney Ironheart IRT120H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It's loaded with four premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone.

One of the coolest features of the IRT120H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You'll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.

The Laney IRT15H-2 15W tube guitar amp head delivers a single Ironheart channel that's flavored with 12AX7 (preamp) and EL84 (power amp) tubes. For when 15W is too much, there's also a 1W guitar input. Other features include high-quality digital reverb, an FX loop with variable level control and a DI output.

The Laney Ironheart IRT60H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It's loaded with a pair of premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone.

One of the coolest features of the IRT60H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You'll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.

Designed and engineered to compliment the L50H’s sonic output each L412 is manufactured from high-grade premium marine plywood and loaded with 4 12” Celestion G12 Heritage drivers which together deliver 120 RMS of great vintage tone.

Finished in the same Marine Blue/Beige livery as the L50H and the rest of the Lionheart range the L412 comes with castors as standard and a protective embroidered slipcover.

Quality speaker cabs from 1x12 to 2x12 to 4x12 quad boxes. Loaded with everything from greenback Celestions® to high quality Fane® speakers. Ibanez, Engl, Hiwatt, and Hughes and Kettner produce professional speaker cabs for all musicians.

The Lionheart L50H's BITE control tightens up the bottom end giving a clean and clear punchy sound, whilst the tone control works in a similar fashion to the Tone controls on your guitar except that it works uniquely on the other end of the amplification chain. Giving you the ability to control not only the overall top end response but also reduce the upper end harmonics on the output stage and preamplifier overdrive sounds.
The Dynamics control allows you to control the Lionhearts low frequency response dialling clockwise gives a more extended low-end response. Dialling the Dynamics control counterclockwise tightens up the low-end response.

The L50H rear panel features an FX loop with Bypass/Insert/Side Chain operation modes with a level control, the footswitch socket as well as housing the Preamp Out/Power amp in sockets along with the speaker connections for 8 & 16 Ohm cabinets.
Each Lionheart L50H features a hand stamped "build number" in the order they came of the production line. Designed and manufactured in the UK.

The LA65D houses a twin channel pre-amp that’s packed with features – Channel 1 takes care of a mic input, additional guitar or keyboard. You then have a gain control, independent Lo & Hi EQ and an independent reverb control. Channel 2 takes a similar format to that of the LA35C adding a Pre shape option – for an instant natural mid cut plus bass & treble boost, a phase switch, along with digital chorus and reverb, plus a SHIMMER feature – allowing you to emphasise the sparkly bright sound of the onboard chorus.

The rear of the unit houses a headphone socket, XLR DI out with a ground lift switch to eliminate ground loop hum and FX loop send and return with switchable level/by-pass switch. Finally a footswitch socket allows remote controlling of the chorus and reverb.

The LA65D handles anything plugged into it with ease, be it a regular 6 string dreadnought or parlour, nylon or 12 string, more than anything else what really impressed me was the clarity and definition of the overall sound. Nothing was lost from the natural guitars tone – everything was there, present and correct.

The LA65D range is extremely accurate, detailed and produces an uncomplicated acoustic sound.

The LX35R features a twin channel preamp – giving aggressive extreme gain options plus a clean channel for softer moments. Featuring a 3 band EQ tone stack, gives you instant tone shaping options to suit the guitar and music style. Kick in the 'XTS' tone shaping switch for an instant scoop to the mid and a boost to key frequencies.

n-board reverb can be dialled in to add ambience to the tone plus an AUX input for jamming along and a headphone socket are great features for private practice or silent late-night sessions. For an expanded performance rig, the External Speaker socket can also be used to bypass the internal 10” driver and hook up to a larger cabinet (such as the LX412). Available in Black, Red and Camo.On-board studio quality reverb. Reverb gives you a sense of the space that you are in. A dry guitar signal can sound a little dull. Adding the right about of reverb provides the guitar signal with ambience and brings it to life.

There's nothing quite like the sound of a tube. That's why the Laney LV200 features an ECC83 placed at just the right point in the signal path for that dynamic response to your playing that only a tube can give. Couple this with a 65 watt output stage to allow you to release your creativity without compromising volume. Laney - Power To The Music.

The LV300 features a pre-amp valve – housing Tube Fusion Technology in its hybrid design. Giving you that legendary Valve Mojo to the pre-amp drive tones! Plus another benefit of a hybrid design is a lack of weight – any model in the LV range can be loaded in and out of a car boot or van without fear of injury but is as tough as it needs to be to withstand the rigours of gigging!

V is more to these amps than just being in the word LiVe – each drive channel features a V switch. The V switch gives you an instantly scooped tone. The nice thing is that there is one per channel – giving you flexibility to scoop the rhythm tone whilst leaving the solo tone unaffected. Next comes the VTS switch – this feature globally boosts certain bass and upper mid frequencies whilst cutting some of the lower mid.

Finally, the digital reverb section with individual controls for the clean and the drive channels, a really nice user-friendly feature.

The rear panel of the LV300 features everything you need – simple series effects loops an extension speaker socket and a footswitch socket. Each model in the LV range comes supplied with a sturdy metal FS3 custom three way footswitch!

The LV300 is geared towards live performance. Loud. Stage worthy and refreshingly user friendly. Finished in a tough black tolex with large protective corners the LV300 will look as good as it first did gig after gig.

The Laney LX120RT is a highly versatile twin combo, featuring a huge 120 watt output section that can drive into 4 ohms. The Laney LX120RT also features separate EQ for each channel, line out socket, FX loop, speaker output, CD input and onboard high quality reverb. With all these goodies under the hood, it really does deliver the goods. Specification Power: 120W Two channels Single input Speakers: 2x12" HH Controls: 3-band EQ, drive, reverb, volume Built-in reverb FX loop Aux. input Output: 8 ohm, 1/4" Dimensions: 17.83" x 26.53" x 10.74 Weight: 40.78 lb.

The LX412 -a rugged, performance ready 4 x 12” cabinet designed for the LX range. The LX412 is capable of handling 200 watts, which makes it ideal for gigs The LX range of solid-state electric guitar amplifiers offers legendary Laney guitar tone and reliability from practice room to stage. Designed and engineered in Great Britain, the LX412 delivers 200 Watts of power and is equipped with 4×12” custom-designed drivers The LX412 is built to withstand the rigors of the road but it is not difficult to carry around using the side mounted easy grab handles. Finished in a heavy-duty granite tolex and with steel corners protectors, your LX412 cabinet will be gigging for years to come.

The Nexus N410 Cabinet is an ultra-light, high performance bass enclosure, loaded with neodymium drivers and finished in Laney Tuffstuff coating, The Nexus N410 has been designed to be used in conjunction with the nexus-sl and SLS bass head. The N410 is loaded with 4 x lavoce neodymium 10” drivers Plus a La Voce 1" Exit compression driver which is switchable to on/off and half power settings. Selected exclusively for the Nexus range, These Italian-designed speaker components are truly outstanding for bass. The lightweight, heavy duty, plywood cabinet is then finished in Laney Tuffstuff: an incredibly tough, ultra-durable and resilient polyurethane coating designed to deal with the rigors of life on the road.

The NEXUS-SL was designed and conceived with the simple goal of making the best bass amplifier on the market. Hear it and believe! The nexus-sl’s power amplifier section combines the power and portability of cutting-edge class D Technology with the natural warmth, compression and dynamic range that only a tube can give: a high voltage ECC83 tube sits between the preamplifier and the 1000W RMS power section. The ergonomic front panel design allows great bass tone to be found easily. The bottom row of control knobs houses tone shaping, the top row houses bass-sympathetic digital effects: space (reverb or chorus) and interval (octaves or 5ths). Laney developed two unique functions to control the NEXUS-SL power stage. ‘Tilt’ is an instant 'EQ seesaw’ and ‘touch’ adjusts the feel of the output response.

500W may not sound like a lot compared to the 1000w+ Class D amps that are now available but thanks to that tube stage in the power amp and a really efficient output you get a lot of volume out of that 500w. This will easily have enough power to get you through everything from local club and pub gigs to festival stages and more.

With all the power and punch you would expect from a Laney cab but now without the weight to go with it! Packed with Celestion Neodymium drivers you still get an amazing performance with plenty of low end "oomph" but without the traditional mass of the magnet! The perfect candidate for taking on the road, use its impressive 800 watts to create a huge sound from clubs to festivals around the world!

Nexus cabinets are loaded with cutting edge Celestion Neodymium drivers, which use ultra powerful magnet material in order to allow the mass of the magnet to be reduced without compromising the performance of the driver. Result: same great performance but with a greatly reduced cabinet weight which makes life on the road with a Nexus stack much more manageable.

The NX410 is fitted with the exceptionally impressive 10” Celestion Neodymium which gives amazing performance which reducing the weight of the cabinet dramatically. A mighty 800 -watts power handling can be accessed via Neutrik combination sockets that accept Speakon or ¼-inch jack cables mounted on the rear panel.

The Laney Richter 800 is a compact, high-efficiency bass enclosure is designed to be the ideal extension cabinet for the Laney R500H. Designed for the bass player who wants more mid range punch on stage the R410's compact design makes it ideal for small stages and easy transport. Whatever your gig the R410 will deliver the performance you are looking for.

The Laney R500-115 is a solid-state combo packing an impressive 500W RMS into a sealed cabinet providing versatility, portability and reliability to all levels of bass player from rehearsal room to a large stage. The front panel houses Normal or High jack inputs a balanced XLR D.I. provides direct, mic-free mixer connection when recording or performing live. An Aux input allows play-along to a backing track and a headphone socket allows for late night playing. The R500-115 lets any bass player own their tone. Compressor Tuner out Speakon Connectors Single Channel 1 x 15” custom driver + HF Horn 10 band Graphic EQ Item dimensions: 563mm x 523mm x 365mm (HWD) Carton dimensions: 650mm x 585mm x 430mm (HWD) Item weight: 23.30kg.

A serious bass players combo: The Richter RB8 offers a 300 watt output stage, 15" custom Celestion speaker, switchable HF horn, bass, treble and 7 band graphic mid, switchable compressor and switchable limiter in a road-ready cabinet with top and side handles. Laney - Power To The Music

The RB9 is the top of the range Laney bass head which can deliver a massive 300 watts into a 4 ohm load. We would recommend hooking this up with the Laney RB410 and RB115. The RB9 also features the same award winning preamp section as the RB8, so you can expect more of the great Laney tone in a very portable package. Laney - Power To The Music.