The QSC GP118-sw is a premium, high-performance, single 18_ subwoofer designed for use in touring or installed concert applications where space constraints or enclosure size are an issue.
Features
Single 18_ subwoofer in a bass-reflex enclosure
Interlocking feet and recess features allow for rigid vertical stacking
Built-in handles for ease of transport
Threaded pole cup for deploying a full-range loudspeaker on top
M10 fittings allows for suspension in permanent and portable applications
The GP212-sw is a premium, highperformance, rectangular dual 12_ 4th order band-pass subwoofer designed for ground stacked use in touring or installed concert applications where space constraints or enclosure size are an issue. With an impressive combination of punch, lowfrequency extension and musical accuracy, the GP212-sw is an ideal companion for QSC?s acclaimed WideLine series as well as other professional sound reinforcement systems.For suspension in permanent installations each GP212-sw subwoofer comes with a total of six (6) threaded M10 inserts.For ground-supported applications, the subwoofers may be stacked horizontally using their interlocking feet and recess features machined into the enclosure?s top panel. A screw-in (M20) pole mount has been added to provide flexibility in use with small 2-way pole mount full-range speakers.
The extremely musical yet powerful performance of the subwoofer is the result of carefully balancing the transducer selection, cabinet volume and port tuning. The resulting system offers plenty of ?punch? while maintaining ample extension so the musically important and satisfying fundamentals are solidly and accurately reproduced.
With an impressive combination of punch, low-frequency extension and musical accuracy, the QSC GP218-SW-BK is an ideal companion for the acclaimed QSC WideLine series as well as other professional sound reinforcement systems. For suspension in permanent installations each GP218-sw QSC passive subwoofer comes with a total of sixteen (16) threaded M10 inserts (four per side).For ground-supported applications, the subwoofers may be stacked horizontally using their interlocking feet and recess features machined into the enclosure?s top panel.The 18_ woofers incorporate a double layer spider and triple roll surround for extended and controlled excursion at extreme power. The 4_ voice coil is wound on a fiberglass former to prevent deformation at high operating temperatures and is extensively vented to reduce power compression. An aluminum demodulating ring is employed for low distortion.
The GXD 4 from QSC is a power amplifier designed for professional PA systems utilizing speakers with 4 and 8 ohm loads and a maximum output of 1600W. The GXD 4 employs a class D output stage with a universal power supply for high performance and efficiency, while keeping the unit lightweight at 11.3 lbs. The integrated DSP section includes High and Low-Pass filters (24dB LR), 4-band parametric equalizer, signal alignment delay, and RMS/Peak speaker protection limiting.The parallel XLR and 1/4" TRS input connectors offer broad compatibility with convenient loop-through capabilities, while the professional binding posts and NL4 connector provide mono and bi-amped speaker connections. In addition to the limiting offered on inputs and outputs, the GXD employs smart speaker protection by providing settings for the loudspeaker's continuous output and impedance (4 ohm or 8 ohm). The GXD 4 ships with a standard IEC power cord.
The K.2 Series Lock Out Cover from QSC is a plastic security panel designed to prevent unwanted control adjustments. It is compatible with K.2 Series powered loudspeakers.
The?QSC K10 Outdoor Cover?(Black) is a nylon and mesh cover for outdoor use. It provides temporary protection in adverse weather. It has a removable amplifier panel that allows access to connectors and controls. A vented panel maintains airflow for proper heat management.
The QSC K10 TOTE Soft Tote Bag (Black) is a weather-resistant, heavy-duty Cordura nylon bag designed to carry and protect a K10 active loudspeaker. It has a pocket in front for wires and cables. The tote is carried by 2 strap handles with an overlapping grip.
Construction
Weather-resistant, heavy-duty Cordura nylon
Padded interior
Zipper closure
Pocket in front of tote
Dual strap handles with overlapping grip
Compatible with QSC K10 Multipurpose 2-way active loudspeaker
The K10.2 Yoke Mount from QSC is a powder-coated steel yoke designed for mounting a QSC K10.2 powered loudspeaker vertically or horizontally to a wall, beam, or other structure.
Allows vertical or horizontal mounting to walls, beams, or other structures
The K10.2 is a 2-way active 10_ speaker?equipped with a 2000-watt power module?carefully?matched?to high-performance woofers and compression drivers.?DMT? (Directivity-Matched?Transition) ensures?smooth?coverage across the entire listening area. Advanced on-board DSP provides Intrinsic Correction??voicing?and?advanced?system management?to further optimize?performance.Superbly?flexible, the K10.2 provides a library of preset?contours?for common applications such as Stage Monitor, Dance?Music,?Musical Instrument Amplification, Hand-held Microphone and more, while also offering?storable Scenes?to recall user-configurable?settings such as?input type,?delay,?EQ,?cross-over and?selected?contour.?Operated as either main PA or as a floor monitor, the speakers?can also be flown, wall??or truss-mounted,?or?placed?on a speaker pole,either?straight-firing?or?with?7.5-degree down-tilt.
The?QSC K12 Outdoor Cover?(Black) is a nylon and mesh cover for outdoor use. It provides temporary protection in adverse weather. It has a removable amplifier panel that allows access to connectors and controls. A vented panel maintains airflow for proper heat management.
The QSC K12 TOTE Soft Tote Bag (Black) is a weather-resistant, heavy-duty Cordura nylon bag designed to carry and protect a K12 active loudspeaker. It has a pocket in front for wires and cables. The tote is carried by 2 strap handles with an overlapping grip.
The K12.2 Yoke Mount from QSC is a powder-coated steel yoke designed for mounting a QSC K12.2 powered loudspeaker vertically or horizontally to a wall, beam, or other structure.
Allows vertical or horizontal mounting to walls, beams, or other structures
The QSC K.2 Series represents the best-inclass loudspeaker for today?s demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications.The QSC K.2 Series is quite simply, the next standard in powered loudspeakers. To start, each model is equipped with a 2000-watt power module carefully matched to high-performance woofers and compression drivers. DMT? (Directivity-Matched Transition) ensures smooth coverage across the entire listening area. Advanced on-board DSP provides Intrinsic Correction? voicing and advanced system management to further optimize performance.The K.2 Series can function as either the Main PA or as a Floor Monitor. Each model can also be flown, wall- or truss-mounted or placed on a speaker pole, either straight-firing or with 7.5 degree down-tilt. This flexibility makes it a smart choice for a wide range of live sound applications.Superbly flexible, the K.2 Series provides its operators with a library of preset contours for common applications such as Stage Monitor, Dance Music, Musical Instrument Amplification, Hand-held Microphone and more, while also offering storable Scenes to recall user-configurable settings such as input type, delay, EQ, cross-over and selected contour. Operated as either main PA or as a floor monitor, each model can also be flown, wall- or truss-mounted, or placed on a speaker pole, either straight-firing or with 7.5-degree down-tilt.
Protect your QSC K8 speaker from the elements with QSC K8 Outdoor Cover. Designed for temporary outdoor use, the K8 Outdoor Cover is perfect solution for keeping the party going no matter what the weather dishes out. This custom-fit cover is made from water-repellant nylon fabric and mesh. Rear access panels let you hook up cables and tweak controls with ease while keeping your gear dry. The front panel unzips and fastens to the side so you can continue playing music. Keep your gear safe and sound with the QSC K8 Outdoor Cover.
The K8.2 Yoke Mount from QSC is a powder-coated steel yoke designed for mounting a QSC K8.2 powered loudspeaker vertically or horizontally to a wall, beam, or other structure.
Allows vertical or horizontal mounting to walls, beams, or other structures
The QSC K.2 Series is quite simply, the next standard in powered loudspeakers. To start, each model is equipped with a 2000-watt power module carefully matched to high-performance woofers and compression drivers. DMT? (Directivity-Matched Transition) ensures smooth coverage across the entire listening area. Advanced on-board DSP provides Intrinsic Correction? voicing and advanced system management to further optimize performance.The K.2 Series can function as either the Main PA or as a Floor Monitor. Each model can also be flown, wall- or truss-mounted or placed on a speaker pole, either straight-firing or with 7.5 degree down-tilt. This flexibility makes it a smart choice for a wide range of live sound applications.Superbly flexible, the K.2 Series provides its operators with a library of preset contours for common applications such as Stage Monitor, Dance Music, Musical Instrument Amplification, Hand-held Microphone and more, while also offering storable Scenes to recall user-configurable settings such as input type, delay, EQ, cross-over and selected contour. Operated as either main PA or as a floor monitor, each model can also be flown, wall- or truss-mounted, or placed on a speaker pole, either straight-firing or with 7.5-degree down-tilt.
The black?QSC KLA AF12?is an aluminum array frame for KLA Series active line array loudspeakers. It enables you to rig and deploy arrays up to 480 lb, with a maximum of five KLA12 and two KLA181 enclosures. The KLA AF12 uses the KLA SOLO rigging system to connect to the top of speakers without the need for tools or external hardware.
Features
Aluminum array frame for KLA Series active line array loudspeakers
For arrays of up to 480 lb/218 kg (with a maximum of five KLA12 and two KLA181 enclosures)
Uses KLA SOLO rigging system to connect to top of speaker without tools or external hardware
The white?QSC KLA AF12?is an aluminum array frame for KLA Series active line array loudspeakers. It enables you to rig and deploy arrays up to 480 lb, with a maximum of five KLA12 and two KLA181 enclosures. The KLA AF12 uses the KLA SOLO rigging system to connect to the top of speakers without the need for tools or external hardware.
Features
Aluminum array frame for KLA Series active line array loudspeakers
For arrays of up to 480 lb/218 kg (with a maximum of five KLA12 and two KLA181 enclosures)
Uses KLA SOLO rigging system to connect to top of speaker without tools or external hardware
The KLA12 Tote from QSC is made from heavy duty Nylon/Cordura and is designed to protect your KLA12 loudspeaker from dust, dirt, and moisture when not in use.
The KLA12 12" 2-Way Line Array Loudspeaker (Black) is a compact speaker designed to be used as part of a speaker array system. The speaker features a rugged ABS plastic enclosure that provides lasting durability in a lightweight package. The speaker has a 12" woofer and a 1.75" compression tweeter to provide crisp, detailed sound reproduction with a wide frequency response. An efficient 500W x 500W power amp module provides clear, strong audio. The efficient design allows up to 5 KLA models to be driven from a single 120VAC 15 amp electrical circuit.The speaker has QSC's DEEP DSP algorithm, which provides extended bass by actively managing low-frequency transients. GuardRail protection circuitry prevents the amplifier module from unnatural and destructive clipping. An auto-standby mode will auto-engage after 5 minutes of inactivity to save energy. XLR and PowerCon input and thru connectors provide connection versatility, while a Phoenix connector allows daisy-chaining.
The?KLA12 12" 2-Way Line Array Loudspeaker (White)?is a compact speaker designed to be used as part of a speaker array system. The speaker features a rugged ABS plastic enclosure that provides lasting durability in a lightweight package. The speaker has a 12" woofer and a 1.75" compression tweeter to provide crisp, detailed sound reproduction with a wide frequency response. An efficient 500W x 500W power amp module provides clear, strong audio. The efficient design allows up to 5 KLA models to be driven from a single 120VAC 15 amp electrical circuit.The speaker has QSC's DEEP DSP algorithm, which provides extended bass by actively managing low-frequency transients. GuardRail protection circuitry prevents the amplifier module from unnatural and destructive clipping. An auto-standby mode will auto-engage after 5 minutes of inactivity to save energy. XLR and PowerCon input and thru connectors provide connection versatility, while a Phoenix connector allows daisy-chaining.The speaker is expressly designed for use in fixed arcuate line arrays, and has a 12:1 design factor with a 90 x 18? coverage pattern, allowing up to 5 units to be configured for 90 x 90? coverage. Most other systems require 6 units for the same coverage pattern. The KLA12's SOLO (Single-Operator Logistics) Rigging System allows you to easily assemble and disassemble the line array in a short amount of time without special tools or external hardware.
Made from heavy duty Nylon/Cordura, the?QSC KLA181 Cover?is designed to protect your KLA181 subwoofer from dust, dirt, and moisture when not in use. The cover has hook-and-loop fastening flaps for accessing the built-in handles of the KLA181 for ease in transport.
The black KLA181 1,000-Watt Subwoofer from QSC is designed to be used in the KLA series fixed line array system. It can reproduce frequencies down to 33 Hz and produces up to 1000 watts of output. The KLA181 has an integrated threaded pole-cup receptacle that allows you to pole-mount up to 2 KLA12 speakers on top of it for array setup. Its M10 fittings allow it to alternatively be suspension mounted.
The QSC KLA181 Line Array Subwoofer is an 18" active subwoofer and is designed to compliment QSC's KLA12 2-Way Line Array Loud Speaker. The KLA 181 features an energy efficient 1000 watt power module. A polarity switch controls low frequency directivity and its pole receptacle is capable of mounting up to 2 KLA12 2-Way Line Array Loud Speakers.QSC's DEEP DSP algorithm provides extended bass by actively managing low-frequency transients. GuardRail protection circuitry prevents the amplifier module from unnatural and destructive clipping. An auto-standby mode will auto-engage after 5 minutes of inactivity to save energy. XLR and PowerCon input and thru connectors provide connection versatility, while a Phoenix connector allows daisy-chaining.
The QSC Lock Out Kit is designed to protect the KS212C subwoofer from unwanted changes. The screw-down, tamper-proof cover prevents access to the LCD menu and gain settings. The kit includes a metal panel and five screws.
The QSC KS112 CVR Padded Cover is intended to protect your KS112C 12" subwoofer during transport. It is fashioned from a weather-resistant, nylon/Cordura material.
The KS112 is the perfect choice for anyone needing high output, low-frequency extension in a highly compact, lightweight, and portable package. Powered by a 2000 watt class D amplifier module, KS112 features a single 12-inch transducer in a 6th order bandpass premium birch cabinet. On-board DSP provides variable crossover and savable/recallable Scenes for commonly-used applications while Intrinsic Correction? tuning and loudspeaker management maximizes performance and protects the subwoofer?s components.Two M20 threaded pole receptacles provide a positive, wobble-free connection to a threaded speaker pole in either vertical or horizontal deployment (pole not included). An optional KS-LOC security cover prevents unauthorized tampering of controls. Rugged, low-noise casters are included.Musicians, bands, mobile DJs, system integrators and AV rental/production professionals alike will appreciate the performance of the KS112 in a wide variety of applications ? particularly when paired with TouchMix Series mixers, further optimizing KS Series performance, or as a complement to K.2 Series loudspeakers.
The QSC KS118-CVR Padded Cover is intended to protect your KS118 18" subwoofer during transport. It is fashioned from a weather-resistant, nylon/cordura material.
The KS118 is a very high output active subwoofer producing impressive low frequencies for mobile entertainment, AV production, clubs and performance venues. Featuring an 18-inch direct radiating driver powered by a 3600 Watt Class D amplifier, the KS118 delivers high sound pressure levels with dynamic and musical sound reproduction of very low frequencies.On-board DSP optimizes and protects system performance as well as offers advanced capabilities such as the ability to array two units in a cardioid arrangement. Highly transportable, the rugged enclosure features comfortable handles and four low noise casters. An M20 threaded pole receptacle accepts a 35 mm pole for easy vertical deployment with full-range loudspeakers.Featuring an 18_ direct radiating driver (which is powered using a 3600 W Class D amp), this subwoofer delivers serious power ? with high sound pressure levels that maintain dynamic sound reproduction, even at very low frequencies. With DSP on-board, this works to protect and optimise the performance of the system. It also allows you to arrange two units in a cardioid manner.
This Padded Cover from QSC is intended to protect your KS212C 12" cardioid subwoofer during transport. It is fashioned from a weather-resistant, nylon/cordura material.
Powered by a 3,600 Watt Class D amplifier, processed with the latest DSP technology, and featuring dual 12-inch long excursion drivers each arranged in a 6th order band pass chamber, these components all combine seamlessly to produce a staggering 15 dB more output at the front of the cabinet than at the rear. Highly portable, the cabinet features comfortable, aluminum handles and four, rear-mounted casters. Two M20 sockets accept a 35 mm loudspeaker pole in either horizontal or vertical orientation.A breakthrough in innovation and design, the 3,600 Watt KS212C subwoofer uniquely provides all the benefits of cardioid deployment in a single, compact enclosure. Keeping bass in its place? for mobile entertainers, AV production and rental professionals, as well as modestly-sized performance venues, the KS212C subwoofer is unparalleled in its ability to manage low frequencies on the stage, or any application where undesirable low frequency energy needs to be minimized.
The KW122 from QSC is a professional-quality active 2-way PA loudspeaker that can also be used as a stage monitor speaker. Ideal for music and speech applications, the lightweight and rugged birch cabinet houses a 12" woofer and a 1.75" compression tweeter to deliver crisp, natural audio with a wide frequency response. A pair of efficient Class-D amplifiers provide a combined power of 1000W for strong audio with low distortion. Directivity Matched Transition technology provides matched low and high frequency coverage across your entire listening area to eliminate "dead" and "hot" zones.The speaker offers excellent connectivity, with XLR/TRS combo inputs and line-level RCA inputs for accepting a variety of sound sources. Up to 3 audio sources can be mixed internally and sent to the outputs. Direct XLR outputs are provided for each channel, as well as a mix output for daisy-chaining. Extensive internal DSP includes Intrinsic Correction, DEEP, and GuardRail technologies to provide terrific sonic clarity and component protection for reliable operation.Onboard control options allow you to adjust EQ to perfectly match your surroundings and applications. You can also use the rear-panel Phoenix connector to connect an external potentiometer (not included) for remote gain control. The speaker has a standard 35mm pole socket with Tilt-Direct technology. This technology lets you simply turn a dial to give the speaker a 7.5? downward tilt to maintain maximum coverage from high mounting positions. The cabinet has integrated M10 suspension points for easy installation as well as ergonomic cast-aluminum handles for easy transport.
The KW152 from QSC is a professional-quality active 2-way PA loudspeaker. Ideal for music and speech applications, the lightweight and rugged birch cabinet houses a 15" woofer and a 1.75" compression tweeter to deliver crisp, natural audio with a wide frequency response. A pair of efficient Class-D amplifiers provide a combined power of 1000W for strong audio with low distortion. Directivity Matched Transition technology provides matched low and high frequency coverage across your entire listening area to eliminate "dead" and "hot" zones.The speaker offers excellent connectivity, with XLR/TRS combo inputs and line-level RCA inputs for accepting a variety of sound sources. Up to 3 audio sources can be mixed internally and sent to the outputs. Direct XLR outputs are provided for each channel, as well as a mix output for daisy-chaining. Extensive internal DSP includes Intrinsic Correction, DEEP, and GuardRail technologies to provide terrific sonic clarity and component protection for reliable operation.Onboard control options allow you to adjust EQ to perfectly match your surroundings and applications. You can also use the rear-panel Phoenix connector to connect an external potentiometer (not included) for remote gain control. The speaker has a standard 35mm pole socket with Tilt-Direct technology. This technology lets you simply turn a dial to give the speaker a 7.5? downward tilt to maintain maximum coverage from high mounting positions. The cabinet has integrated M10 suspension points for easy installation as well as ergonomic cast-aluminum handles for easy transport.
The KW153 from QSC is a professional-quality active 3-way PA loudspeaker. Ideal for music and speech applications, the lightweight and rugged birch cabinet houses a 15" woofer, a 6.5" midrange driver, and a 1.75" compression tweeter to deliver crisp, natural audio with a wide frequency response. A pair of efficient Class-D amplifiers provide a combined power of 1000W for strong audio with low distortion. Directivity Matched Transition technology provides matched low and high frequency coverage across your entire listening area to eliminate "dead" and "hot" zones.The speaker offers excellent connectivity, with XLR/TRS combo inputs and line-level RCA inputs for accepting a variety of sound sources. Up to 3 audio sources can be mixed internally and sent to the outputs. Direct XLR outputs are provided for each channel, as well as a mix output for daisy-chaining. Extensive internal DSP includes Intrinsic Correction, DEEP, and GuardRail technologies to provide terrific sonic clarity and component protection for reliable operation.Onboard control options allow you to adjust EQ to perfectly match your surroundings and applications. You can also use the rear-panel Phoenix connector to connect an external potentiometer (not included) for remote gain control. The speaker has a standard 35mm pole socket and integrated M10 suspension points for easy mounting and installation. It also has ergonomic cast-aluminum handles for easy transport.
The KW181 from QSC is a professional-quality active 3-way PA loudspeaker. Ideal for low frequency reinforcement of KW-series loudspeakers, the lightweight and rugged birch cabinet houses an 18" woofer to deliver deep, thumping bass with frequencies as low as 35Hz. An efficient Class-D amplifier provides an output power of 1000W for strong audio with low distortion.
Made from heavy duty Nylon/Cordura, the QSC KLA181 Cover is designed to protect your KLA181 subwoofer from dust, dirt, and moisture when not in use. The cover has hook-and-loop fastening flaps for accessing the built-in handles of the KLA181 for ease in transport.
The QSC M10 Forged-Shoulder Steel Eyebolt Kit-C?allows for suspension mounting of AcousticDesign, KLA, K, and K.2 series loudspeakers. The M10 eyebolt kit includes three M10 shoulder eyebolts and three M10 black conical spring washers. Installation of the M10 kit is a simple process of threading the eyebolt into the enclosure's threaded insert.
The?QSC M10 Kit-W?is an eyebolt suspension kit for hanging E112, E115, and E215 speakers, as well as KW Series and AcousticPerformance Series loudspeakers. The kit includes three M10x1.5, 35-38mm stainless, forged shoulder eyebolts.
The?QSC M8 Eyebolt Kit-A?includes six M8 forged shoulder eyebolts designed to provide secure cable attachment points, when suspending of flying E-Series loudspeakers. The stainless-steel eyebolts do not corrode, rust, or stain with water.
The PB3082 pullback bar is used for pulling back the bottom element of the array for aiming and stability or as the primary suspension component for certain small arrays. Available in black or white.
No products in the cart.