No products in the cart.
Small array frame for use with WL3082 and WL212-sw; accommodates arrays of up to?twelve (12) WL3082 or two (2) WL212-sw and eight (8) WL3082; can also be used in?conjunction with EB3082 to construct arrays with WL212-sw suspended behind WL3082;?available in blackFeatures of the WL3082 WL3082 | WL212-swFeatures
? Extraordinarily compact (only 20_ /508 mm wide) and lightweight(38 lb/17.2 kg) ? High acoustic output (133 dB SPL peak) ? Wide 140? horizontal coverage ? High power, 8_ neodymium LF /MF drivers provide low-frequency extension to 62 Hz without subwoofers ? 3_ diaphragm compression driver on QSC?s patented 140? multiple diffractionaperture waveguide (Patent No. 7,177,437) ? Simple, easy-to-use rigging system supports arrays of up to 12 units with 10:1 design factor ? Flexible ground stack capability ? Fully supported in EASE and EASE Focus acoustic software ? Dual 12_ subwoofer in a 4th order bandpass enclosure ? 135 dB SPL peak output capability ? Frequency range to 32 Hz (-10 dB down point) ? May be suspended at the top of a WL3082 array or behind the array ? Integral suspension hardware also supports WL3082 in ground stack applicationsQSC Af3082-S-Bk Small Array Frame For Use With Wl3082 And Wl212-Sw; Accommodates Arrays Of Up To Twelve (12) Wl3082Or Two (2) Wl212-Sw And Eight (8) Wl3082Available In Black
AED 5,896.20 Exc VATAED 5,896.20 Exc VAT Add to cart- This?QSC Outdoor Cover?is designed for use with the CP12 powered loudspeaker. It allows you to temporarily use the powered speaker in less-than-ideal weather. A removable amplifier panel lets you access connectors and controls. As it sports a vented design, the QSC Outdoor Cover allows the monitor to maintain airflow for heat management. The tote is fashioned out of fabric and mesh. Please note this unit is not intended to facilitate permanent outdoor installations.
QSC Cp12 Outdoor Cover Nylon Fabric And Mesh Cover For Temporary Outdoor Use Of Cp12 In Adverse Weather
AED 324.00 Exc VATAED 324.00 Exc VAT Add to cart - This?QSC Tote?is designed for use with the CP12 powered loudspeaker. It allows you to transport the monitor from place to place. The tote sports a weather-resistant construction, fashioned out of heavy-duty cordura nylon material. Pockets are on hand to store cables and other accessories. A strap allows you to carry the tote.
QSC Cp12 Tote Soft, Padded Tote Made With Weather Resistant, Heavy-Duty Nylon/Cordura
AED 529.00 Exc VATAED 529.00 Exc VAT Add to cart - High performance, superior quality and lasting reliability. These are the hallmarks of the QSC brand and the reason why millions of professionals the world-over have come to trust QSC to help them confidently deliver superior experiences and memorable performancesWith each CP12 speaker boasting 1000W of power, the amount of volume that they can project will fill a space of practically any size, with only the finest audio. The CP12 speakers also boast built-in Class-D amplifier modules, with advanced DSP ensuring that your audio is clear, precise and detailed wherever you decide to set these up.
QSC Cp12-Uk 1000W Active Portable Loudspeaker System; 12-Inch Woofer Stage Monitor
AED 3,153.00 Exc VATAED 3,153.00 Exc VAT Add to cart - This?QSC Yoke Mount?is designed for use with the CP12 powered loudspeaker. It allows you to mount the speaker horizontally or vertically to beams, walls, and other suitable structures. The yoke is constructed out of power-coated steel. Included with the yoke are hand-tighten knobs and hex head bolts. These facilitate quick deployment and installation. When not in use, the hand-tighten knobs can be stowed in the threaded standoffs that are attached to the yoke.
QSC Cp12Ym-Bk Powder Coated Steel Yoke For Mounting The Cp12 Vertically Or Horizontally To Structures
AED 788.00 Exc VATAED 788.00 Exc VAT Add to cart - This?QSC Outdoor Cover?is designed for use with the CP8 powered loudspeaker. It allows you to temporarily use the powered speaker in less-than-ideal weather. A removable amplifier panel lets you access connectors and controls. As it sports a vented design, the QSC Outdoor Cover allows the monitor to maintain airflow for heat management. The tote is fashioned out of fabric and mesh. Please note this unit is not intended to facilitate permanent outdoor installations.
QSC Cp8 Outdoor Cover Nylon Fabric And Mesh Cover For Temporary Outdoor Use Of Cp8 In Adverse Weather
AED 271.00 Exc VATAED 271.00 Exc VAT Add to cart - This?QSC Tote?is designed for use with the CP8 powered loudspeaker. It allows you to transport the monitor from place to place. The tote sports a weather-resistant construction, fashioned out of heavy-duty cordura nylon material. Pockets are on hand to store cables and other accessories. A strap allows you to carry the tote.
QSC Cp8 Tote Soft, Padded Tote Made With Weather Resistant, Heavy-Duty Nylon/Cordura
AED 470.00 Exc VATAED 470.00 Exc VAT Add to cart - QSC is one of the world?s most popular and highly-regarded manufacturers of PA speakers. Joining their acclaimed product catalogue, the CP series represents the quality and advanced sonics you?d expect from QSC, but in an affordable and more compact package.With each CP8 speaker boasting 1000W of power, the amount of volume that they can project will fill a space of practically any size, with only the finest audio. The CP8 speakers also boast built-in Class-D amplifier modules, with advanced DSP ensuring that your audio is clear, precise and detailed wherever you decide to set these up.
QSC Cp8-Uk 1000W Active, Portable Loudspeaker System; 8-Inch Woofer
AED 2,470.00 Exc VATAED 2,470.00 Exc VAT Add to cart - This?QSC Yoke Mount?is designed for use with the CP8 powered loudspeaker. It allows you to mount the speaker horizontally or vertically to beams, walls, and other suitable structures. The yoke is constructed out of power-coated steel. Included with the yoke are hand-tighten knobs and hex head bolts. These facilitate quick deployment and installation. When not in use, the hand-tighten knobs can be stowed in the threaded standoffs that are attached to the yoke.
QSC Cp8Ym-Bk Powder Coated Steel Yoke For Mounting The Cp8 Vertically Or Horizontally To Structures
AED 699.00 Exc VATAED 699.00 Exc VAT Add to cart - The E10-CVR is a soft, padded cover made with heavy-duty nylon/cordura material for the E110 loudspeaker.
QSC E10-Cvr Soft, Padded Cover For E10 & E110
AED 463.00 Exc VATAED 463.00 Exc VAT Add to cart - The black QSC E110 is a compact, two-way loudspeaker with a 10 die cast frame woofer with a 2.5 voice-coil, housed in a multi-purpose enclosure for stage monitor or main PA deployment. It incorporates QSC DMT (Directivity Matched Transition) design with an 85? wide coverage. When used as a stage monitor, the E110 loudspeaker is angled up at 55?, allowing it to be placed near the performer when used on a crowded stage.An all metal, dual angle, 35mm socket allows the loudspeaker to be mounted vertically on a pole or angled down by 10 to improve audience coverage and reduce rear wall reflections. Multiple mounting options using E-Series Yoke or M8 eyebolts (sold separately) are supported. Input connections include dual NL4 as well as screw terminal receptacles.
QSC E110 10″ 2-Way, Externally Powered, Live Sound-Reinforcement Loudspeaker Available In Black
AED 3,027.00 Exc VATAED 3,027.00 Exc VAT Add to cart - The QSC E110 Yoke Mount is a powder-coated steel yoke for mounting the E110 vertically to structures.
QSC E110Ym Powder Coated Steel Yoke For Mounting The E110 Either Horizontally Or Vertically To Structures
AED 849.00 Exc VATAED 849.00 Exc VAT Add to cart - The black QSC E112 is a trapezoidal, two-way loudspeaker, well suited for sound reinforcement applications including live performance, DJ and dance music, karaoke, and event production. The E112 requires an amplifier with a minimum of 400W continuous (1600W peak) to power the 12" woofer and 1" compression driver that combine to offer a frequency response of 64 Hz to 20 kHz (-6 dB) with a peak SPL of 128 dB. QSC recommends the use of a DSP speaker processor or a power amplifier with integrated DSP in order to set crossovers, limiting, and equalization to ensure the best performance. QSC's GXD or PLD amplifiers, as well as TouchMix digital mixers offer on-board DSP and factory-tuned presets, which provide settings for live sound reinforcement (with and without subwoofers), stage monitoring, dance music, and karaoke.
QSC E112 12″ 2-Way, Externally Powered, Live Sound-Reinforcement Loudspeaker Available In Black
AED 3,594.00 Exc VATAED 3,594.00 Exc VAT Add to cart - The black QSC E115 is a trapezoidal, two-way loudspeaker, well suited for sound reinforcement applications including live performance, DJ and dance music, karaoke, and event production. The E115 requires an amplifier with a minimum of 500W continuous (2000W peak) to power the 15.0" woofer and 1.5" compression driver that combine to offer a frequency response of 55 Hz to 20 kHz (-6 dB) with a peak SPL 130 dB. QSC recommends the use of a speaker processor or a power amplifier with integrated DSP in order to set crossovers, limiting, and equalization to ensure the best performance. QSC's GXD or PLD amplifiers, as well as TouchMix digital mixers offer on-board DSP and factory-tuned presets, which provide settings for live sound reinforcement (with and without subwoofers), stage monitoring, dance music, and karaoke.
QSC E115 15″ 2-Way, Externally Powered, Live Sound-Reinforcement Loudspeaker Available In Black
AED 4,737.00 Exc VATAED 4,737.00 Exc VAT Add to cart - The black QSC E118SW Passive Subwoofer is a high-performance direct radiation subwoofer, well suited for sound reinforcement applications including live performance, DJ and dance music, karaoke, and event production. The E118SW requires an amplifier with a minimum of 800W continuous (3200W peak) to power the 18" woofer, which offers a frequency response of 37 to 230 Hz (-6 dB) with a peak SPL 133 dB.QSC recommends the use of a speaker processor or a power amplifier with integrated DSP in order to set crossovers, limiting, and equalization to ensure the best performance. QSC's GXD or PLD amplifiers, as well as TouchMix digital mixers offer on-board DSP and factory-tuned presets, which provide settings for live sound reinforcement, stage monitoring, dance music, and karaoke.The rugged plywood enclosure is coated in black textured paint and features a heavy-duty grille lined with foam for protection. A threaded, M20 pole socket and speaker pole are provided for sub/satellite use with any of the E-Series two-way full-range loudspeakers. For portable applications, the E118SW includes attachment points for four optional casters.800W continuous, 3200W peakE-Series Entertainment System offers advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixersFoam-lined perforated steel grilleConstructed of rugged plywood and coated in black, textured paintIncludes speaker pole
QSC E118Sw 18″ Externally Powered, Live Sound-Reinforcement Subwoofer Available In Black
AED 5,417.00 Exc VATAED 5,417.00 Exc VAT Add to cart - The E118sw Cover is a soft, padded cover made with heavy-duty Nylon/Cordura material for the E118sw subwoofer. *Cover designed to be used with caster side down. (Casters sold separately).
QSC E118Sw-Cvr Soft, Padded Cover For E118Sw
AED 690.00 Exc VATAED 690.00 Exc VAT Add to cart - The E12-CVR is a soft, padded cover made with heavy-duty nylon/cordura material for the E12 loudspeaker.
QSC E12-Cvr Soft, Padded Cover For E12 & E112
AED 518.00 Exc VATAED 518.00 Exc VAT Add to cart - The E12YM-BK is a powder coated steel yoke for mounting the E12 loudspeaker vertically to structures.
QSC E12Ym Powder Coated Steel Yoke For Mounting The E12 & E112 To Structures
AED 907.00 Exc VATAED 907.00 Exc VAT Add to cart - The E15-CVR is a soft, padded cover made with heavy-duty nylon/cordura material for the E15 loudspeaker.
QSC E15-Cvr Soft, Padded Cover For E15 & E115
AED 631.00 Exc VATAED 631.00 Exc VAT Add to cart - The E15YM-BK is a powder coated steel yoke for mounting the E15 loudspeaker vertically to structures.
QSC E15Ym Powder Coated Steel Yoke For Mounting The E15 & E115 To Structures
AED 1,043.00 Exc VATAED 1,043.00 Exc VAT Add to cart - The?E215?from?QSC?is a high-output 2-way loudspeaker featuring dual 15" woofers and a 1.5" high-frequency driver that combine to offer a frequency range of 39 Hz to 20 kHz with an SPL of 134 dB. Each 15" woofer is made with a die-cast aluminum frame and 3.5" voice coil, while the high-frequency compression driver utilizes a titanium diaphragm with a 2.8" voice coil and a 1.5" exit. The speaker offers a power handling capability of 1000W continuous and 4000W peak with a 75? conical dispersion.The enclosure is made from 11-ply plywood with a black textured paint finish and a perforated, powder-coated steel grille with foam lining. For connections, the rear panel offers two NL4 and one barrier strip connectors. The optional custom-fit padded cover offers protection during transportation, while the optional M10 rigging kit provides hanging options for permanent installations.
QSC E215 Dual 15″ 2-Way, Externally Powered, Live Sound-Reinforcement Loudspeaker Available In Black
AED 5,887.83 Exc VATAED 5,887.83 Exc VAT Add to cart - The E215-CVR is a soft, padded cover made with heavy-duty nylon/cordura material for the E215 loudspeaker.
QSC E215-Cvr Soft, Padded Cover For E215
AED 625.00 Exc VATAED 625.00 Exc VAT Add to cart - The?E218SW?from?QSC?is a direct radiating subwoofer featuring dual 18" woofers that offer a frequency range of 32 to 230 Hz with an SPL of 136 dB. Each 18" woofer is made with a die-cast aluminum frame and 4" voice coil that when combined, offer a power handling capability of 1200W continuous and 4800W peak.The enclosure is made from 11-ply plywood with a black textured paint finish and a perforated, powder-coated steel grille with foam lining. For connections, the rear panel offers two NL4 and one barrier strip connectors. The optional custom-fit padded cover offers protection during transportation and an optional caster kit provides greater portability.
QSC E218Sw Dual 18″ Externally Powered, Live Sound-Reinforcement Subwoofer Available In Black
AED 7,340.49 Exc VATAED 7,340.49 Exc VAT Add to cart - Soft, padded cover made with heavy-duty Nylon/Cordura material for the E218SW subwoofer. Cover designed to be used with caster side down. (Casters sold separately)
QSC E218Sw-Cvr Soft, Padded Cover For E218Sw
AED 919.00 Exc VATAED 919.00 Exc VAT Add to cart - The QSC EB3082-BK Extension Bar used in conjunction with two (2) AF3082-S array frames allows arrays of WL212-SW subwoofers to be suspended behind arrays of WL3082 line array modules. It required for system with the subwoofers flown behind the main array.
QSC Eb3082-Bk Extension Bar – Used In Conjunction With Two (2) Af3082-S Array Frames Allows Arrays Of Wl212-SwSubwoofers Available In Black
AED 7,528.35 Exc VATAED 7,528.35 Exc VAT Add to cart - The QSC GP118-sw is a premium, high-performance, single 18_ subwoofer designed for use in touring or installed concert applications where space constraints or enclosure size are an issue.
Features
- Single 18_ subwoofer in a bass-reflex enclosure
- Interlocking feet and recess features allow for rigid vertical stacking
- Built-in handles for ease of transport
- Threaded pole cup for deploying a full-range loudspeaker on top
- M10 fittings allows for suspension in permanent and portable applications
- Dual NL4 Speakon connectors
- 18 mm Baltic birch plywood construction
- 16-gauge powder coated steel grille
QSC Gp118-Sw-Bk 18″ Portable Subwoofer With The Same Acoustical Performance As The Wl118-Sw Regular Enclosure With The16 X M10 Suspension Points; Available In Black
AED 11,498.52 Exc VATAED 11,498.52 Exc VAT Add to cart - The GP212-sw is a premium, highperformance, rectangular dual 12_ 4th order band-pass subwoofer designed for ground stacked use in touring or installed concert applications where space constraints or enclosure size are an issue. With an impressive combination of punch, lowfrequency extension and musical accuracy, the GP212-sw is an ideal companion for QSC?s acclaimed WideLine series as well as other professional sound reinforcement systems.For suspension in permanent installations each GP212-sw subwoofer comes with a total of six (6) threaded M10 inserts.For ground-supported applications, the subwoofers may be stacked horizontally using their interlocking feet and recess features machined into the enclosure?s top panel. A screw-in (M20) pole mount has been added to provide flexibility in use with small 2-way pole mount full-range speakers.The extremely musical yet powerful performance of the subwoofer is the result of carefully balancing the transducer selection, cabinet volume and port tuning. The resulting system offers plenty of ?punch? while maintaining ample extension so the musically important and satisfying fundamentals are solidly and accurately reproduced.
QSC Gp212-Sw-Bk Ultra Compact, Dual 12? (300 Mm) Bandpass Subwoofer Available In Black
AED 10,217.91 Exc VATAED 10,217.91 Exc VAT Add to cart - With an impressive combination of punch, low-frequency extension and musical accuracy, the QSC GP218-SW-BK is an ideal companion for the acclaimed QSC WideLine series as well as other professional sound reinforcement systems. For suspension in permanent installations each GP218-sw QSC passive subwoofer comes with a total of sixteen (16) threaded M10 inserts (four per side).For ground-supported applications, the subwoofers may be stacked horizontally using their interlocking feet and recess features machined into the enclosure?s top panel.The 18_ woofers incorporate a double layer spider and triple roll surround for extended and controlled excursion at extreme power. The 4_ voice coil is wound on a fiberglass former to prevent deformation at high operating temperatures and is extensively vented to reduce power compression. An aluminum demodulating ring is employed for low distortion.
QSC Gp218-Sw-Bk Dual 18″ Subwoofer; Same Acoustical Performance As The Wl218-Sw, Rectangular Enclosure With 16 X M10Suspension Points; Available In Black
AED 14,057.88 Exc VATAED 14,057.88 Exc VAT Add to cart - The GXD 4 from QSC is a power amplifier designed for professional PA systems utilizing speakers with 4 and 8 ohm loads and a maximum output of 1600W. The GXD 4 employs a class D output stage with a universal power supply for high performance and efficiency, while keeping the unit lightweight at 11.3 lbs. The integrated DSP section includes High and Low-Pass filters (24dB LR), 4-band parametric equalizer, signal alignment delay, and RMS/Peak speaker protection limiting.The parallel XLR and 1/4" TRS input connectors offer broad compatibility with convenient loop-through capabilities, while the professional binding posts and NL4 connector provide mono and bi-amped speaker connections. In addition to the limiting offered on inputs and outputs, the GXD employs smart speaker protection by providing settings for the loudspeaker's continuous output and impedance (4 ohm or 8 ohm). The GXD 4 ships with a standard IEC power cord.
QSC Gxd4 Light Weight, Class-D Professional Power Amplifier With Dsp, 2 Channels, 400 Watts
AED 3,287.00 Exc VATAED 3,287.00 Exc VAT Add to cart - The K.2 Series Lock Out Cover from QSC is a plastic security panel designed to prevent unwanted control adjustments. It is compatible with K.2 Series powered loudspeakers.
QSC K.2 Loc Screw-Down Tamper-Proof Cover For Lcd Menu And Input Gains.
AED 149.00 Exc VATAED 149.00 Exc VAT Add to cart - The?QSC K10 Outdoor Cover?(Black) is a nylon and mesh cover for outdoor use. It provides temporary protection in adverse weather. It has a removable amplifier panel that allows access to connectors and controls. A vented panel maintains airflow for proper heat management.
QSC K10 Outdoor Cover Nylon Fabric And Mesh Cover For Temporary Outdoor Use Of K10 In Adverse Weather
AED 408.00 Exc VATAED 408.00 Exc VAT Add to cart - The QSC K10 TOTE Soft Tote Bag (Black) is a weather-resistant, heavy-duty Cordura nylon bag designed to carry and protect a K10 active loudspeaker. It has a pocket in front for wires and cables. The tote is carried by 2 strap handles with an overlapping grip.
Construction
- Weather-resistant, heavy-duty Cordura nylon
- Padded interior
- Zipper closure
Pocket in front of toteDual strap handles with overlapping gripCompatible with QSC K10 Multipurpose 2-way active loudspeakerQSC K10 Tote Soft, Padded Tote Made With Weather Resistant, Heavy-Duty Nylon/Cordura Material
AED 572.00 Exc VATAED 572.00 Exc VAT Add to cart - The K10.2 Yoke Mount from QSC is a powder-coated steel yoke designed for mounting a QSC K10.2 powered loudspeaker vertically or horizontally to a wall, beam, or other structure.
- Allows vertical or horizontal mounting to walls, beams, or other structures
- Compatible with K10.2 powered loudspeakers
- Powder-coated steel for durability and strength
QSC K10.2 Yoke Powder Coated Steel Yoke For Mounting The K10.2 Vertically Or Horizontally To Structures
AED 868.00 Exc VATAED 868.00 Exc VAT Add to cart - The K10.2 is a 2-way active 10_ speaker?equipped with a 2000-watt power module?carefully?matched?to high-performance woofers and compression drivers.?DMT? (Directivity-Matched?Transition) ensures?smooth?coverage across the entire listening area. Advanced on-board DSP provides Intrinsic Correction??voicing?and?advanced?system management?to further optimize?performance.Superbly?flexible, the K10.2 provides a library of preset?contours?for common applications such as Stage Monitor, Dance?Music,?Musical Instrument Amplification, Hand-held Microphone and more, while also offering?storable Scenes?to recall user-configurable?settings such as?input type,?delay,?EQ,?cross-over and?selected?contour.?Operated as either main PA or as a floor monitor, the speakers?can also be flown, wall??or truss-mounted,?or?placed?on a speaker pole,either?straight-firing?or?with?7.5-degree down-tilt.
QSC K10.2-Uk 2000W Active, Portable Loudspeaker System; 10-Inch Woofer; 1.0-Inch Compression Driver Use As Main Or Stage Monitor
AED 4,591.00 Exc VATAED 4,591.00 Exc VAT Add to cart - The?QSC K12 Outdoor Cover?(Black) is a nylon and mesh cover for outdoor use. It provides temporary protection in adverse weather. It has a removable amplifier panel that allows access to connectors and controls. A vented panel maintains airflow for proper heat management.
QSC K12 Outdoor Cover Nylon Fabric And Mesh Cover For Temporary Outdoor Use Of K12 In Adverse Weather
AED 514.00 Exc VATAED 514.00 Exc VAT Add to cart - The QSC K12 TOTE Soft Tote Bag (Black) is a weather-resistant, heavy-duty Cordura nylon bag designed to carry and protect a K12 active loudspeaker. It has a pocket in front for wires and cables. The tote is carried by 2 strap handles with an overlapping grip.
QSC K12 Tote Soft, Padded Tote Made With Weather Resistant, Heavy-Duty Nylon/Cordura Material
AED 699.00 Exc VATAED 699.00 Exc VAT Add to cart - The K12.2 Yoke Mount from QSC is a powder-coated steel yoke designed for mounting a QSC K12.2 powered loudspeaker vertically or horizontally to a wall, beam, or other structure.
- Allows vertical or horizontal mounting to walls, beams, or other structures
- Compatible with K12.2 powered loudspeakers
- Powder-coated steel for durability and strength
QSC K12.2 Yoke Powder Coated Steel Yoke For Mounting The K12.2 Vertically Or Horizontally To Structures
AED 903.00 Exc VATAED 903.00 Exc VAT Add to cart - The QSC K.2 Series represents the best-inclass loudspeaker for today?s demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications.The QSC K.2 Series is quite simply, the next standard in powered loudspeakers. To start, each model is equipped with a 2000-watt power module carefully matched to high-performance woofers and compression drivers. DMT? (Directivity-Matched Transition) ensures smooth coverage across the entire listening area. Advanced on-board DSP provides Intrinsic Correction? voicing and advanced system management to further optimize performance.The K.2 Series can function as either the Main PA or as a Floor Monitor. Each model can also be flown, wall- or truss-mounted or placed on a speaker pole, either straight-firing or with 7.5 degree down-tilt. This flexibility makes it a smart choice for a wide range of live sound applications.Superbly flexible, the K.2 Series provides its operators with a library of preset contours for common applications such as Stage Monitor, Dance Music, Musical Instrument Amplification, Hand-held Microphone and more, while also offering storable Scenes to recall user-configurable settings such as input type, delay, EQ, cross-over and selected contour. Operated as either main PA or as a floor monitor, each model can also be flown, wall- or truss-mounted, or placed on a speaker pole, either straight-firing or with 7.5-degree down-tilt.
QSC K12.2-Uk 2000W Active Portable Loudspeaker System; 12-Inch Woofer; 1.0-Inch Compression Driver Use As Main Or Stage Monitor
AED 5,124.00 Exc VATAED 5,124.00 Exc VAT Add to cart - Protect your QSC K8 speaker from the elements with QSC K8 Outdoor Cover. Designed for temporary outdoor use, the K8 Outdoor Cover is perfect solution for keeping the party going no matter what the weather dishes out. This custom-fit cover is made from water-repellant nylon fabric and mesh. Rear access panels let you hook up cables and tweak controls with ease while keeping your gear dry. The front panel unzips and fastens to the side so you can continue playing music. Keep your gear safe and sound with the QSC K8 Outdoor Cover.
QSC K8 Outdoor Cover Nylon Fabric And Mesh Cover For Temporary Outdoor Use Of K8 In Adverse Weather
AED 347.00 Exc VATAED 347.00 Exc VAT Add to cart - The K8.2 Yoke Mount from QSC is a powder-coated steel yoke designed for mounting a QSC K8.2 powered loudspeaker vertically or horizontally to a wall, beam, or other structure.
- Allows vertical or horizontal mounting to walls, beams, or other structures
- Compatible with K8.2 powered loudspeakers
- Powder-coated steel for durability and strength
QSC K8.2 Yoke Powder Coated Steel Yoke For Mounting The K8.2 Vertically Or Horizontally To Structures
AED 794.00 Exc VATAED 794.00 Exc VAT Add to cart - The QSC K.2 Series is quite simply, the next standard in powered loudspeakers. To start, each model is equipped with a 2000-watt power module carefully matched to high-performance woofers and compression drivers. DMT? (Directivity-Matched Transition) ensures smooth coverage across the entire listening area. Advanced on-board DSP provides Intrinsic Correction? voicing and advanced system management to further optimize performance.The K.2 Series can function as either the Main PA or as a Floor Monitor. Each model can also be flown, wall- or truss-mounted or placed on a speaker pole, either straight-firing or with 7.5 degree down-tilt. This flexibility makes it a smart choice for a wide range of live sound applications.Superbly flexible, the K.2 Series provides its operators with a library of preset contours for common applications such as Stage Monitor, Dance Music, Musical Instrument Amplification, Hand-held Microphone and more, while also offering storable Scenes to recall user-configurable settings such as input type, delay, EQ, cross-over and selected contour. Operated as either main PA or as a floor monitor, each model can also be flown, wall- or truss-mounted, or placed on a speaker pole, either straight-firing or with 7.5-degree down-tilt.
QSC K8.2-Uk 2000W Active, Portable Loudspeaker System; 8-Inch Woofer; 1.0-Inch Compression Driver For Stage Monitor
AED 4,261.00 Exc VATAED 4,261.00 Exc VAT Add to cart - The KLA AF12 Tote from QSC is made designed to protect the KLA AF12 Array Frame when not in use.
QSC Kla Af12 Tote Tote Bag
AED 695.00 Exc VATAED 695.00 Exc VAT Add to cart - The black?QSC KLA AF12?is an aluminum array frame for KLA Series active line array loudspeakers. It enables you to rig and deploy arrays up to 480 lb, with a maximum of five KLA12 and two KLA181 enclosures. The KLA AF12 uses the KLA SOLO rigging system to connect to the top of speakers without the need for tools or external hardware.
Features
- Aluminum array frame for KLA Series active line array loudspeakers
- For arrays of up to 480 lb/218 kg (with a maximum of five KLA12 and two KLA181 enclosures)
- Uses KLA SOLO rigging system to connect to top of speaker without tools or external hardware
QSC Kla Af12-Bk Aluminum Array Frame For Kla Series Enclosures; Available In Black
AED 5,222.88 Exc VATAED 5,222.88 Exc VAT Add to cart - The white?QSC KLA AF12?is an aluminum array frame for KLA Series active line array loudspeakers. It enables you to rig and deploy arrays up to 480 lb, with a maximum of five KLA12 and two KLA181 enclosures. The KLA AF12 uses the KLA SOLO rigging system to connect to the top of speakers without the need for tools or external hardware.
Features
- Aluminum array frame for KLA Series active line array loudspeakers
- For arrays of up to 480 lb/218 kg (with a maximum of five KLA12 and two KLA181 enclosures)
- Uses KLA SOLO rigging system to connect to top of speaker without tools or external hardware
QSC Kla Af12-Wh Aluminum Array Frame For Kla Series Enclosures; Available In White
AED 5,222.88 Exc VATAED 5,222.88 Exc VAT Add to cart - The KLA12 Tote from QSC is made from heavy duty Nylon/Cordura and is designed to protect your KLA12 loudspeaker from dust, dirt, and moisture when not in use.
QSC Kla12 Tote Soft Padded Tote Made With Heavy-Duty Nylon/Cordura Material
AED 738.00 Exc VATAED 738.00 Exc VAT Add to cart - The KLA12 12" 2-Way Line Array Loudspeaker (Black) is a compact speaker designed to be used as part of a speaker array system. The speaker features a rugged ABS plastic enclosure that provides lasting durability in a lightweight package. The speaker has a 12" woofer and a 1.75" compression tweeter to provide crisp, detailed sound reproduction with a wide frequency response. An efficient 500W x 500W power amp module provides clear, strong audio. The efficient design allows up to 5 KLA models to be driven from a single 120VAC 15 amp electrical circuit.The speaker has QSC's DEEP DSP algorithm, which provides extended bass by actively managing low-frequency transients. GuardRail protection circuitry prevents the amplifier module from unnatural and destructive clipping. An auto-standby mode will auto-engage after 5 minutes of inactivity to save energy. XLR and PowerCon input and thru connectors provide connection versatility, while a Phoenix connector allows daisy-chaining.
QSC Kla12-Bk 500W X 500W, Two-Way, Active, Line-Array Loudspeaker; 12-Inch Woofer
AED 11,101.00 Exc VATAED 11,101.00 Exc VAT Add to cart - The?KLA12 12" 2-Way Line Array Loudspeaker (White)?is a compact speaker designed to be used as part of a speaker array system. The speaker features a rugged ABS plastic enclosure that provides lasting durability in a lightweight package. The speaker has a 12" woofer and a 1.75" compression tweeter to provide crisp, detailed sound reproduction with a wide frequency response. An efficient 500W x 500W power amp module provides clear, strong audio. The efficient design allows up to 5 KLA models to be driven from a single 120VAC 15 amp electrical circuit.The speaker has QSC's DEEP DSP algorithm, which provides extended bass by actively managing low-frequency transients. GuardRail protection circuitry prevents the amplifier module from unnatural and destructive clipping. An auto-standby mode will auto-engage after 5 minutes of inactivity to save energy. XLR and PowerCon input and thru connectors provide connection versatility, while a Phoenix connector allows daisy-chaining.The speaker is expressly designed for use in fixed arcuate line arrays, and has a 12:1 design factor with a 90 x 18? coverage pattern, allowing up to 5 units to be configured for 90 x 90? coverage. Most other systems require 6 units for the same coverage pattern. The KLA12's SOLO (Single-Operator Logistics) Rigging System allows you to easily assemble and disassemble the line array in a short amount of time without special tools or external hardware.
QSC Kla12-Wh 500W X 500W, Two-Way, Active, Line-Array Loudspeaker; 12-Inch Woofer
AED 11,101.00 Exc VATAED 11,101.00 Exc VAT Add to cart - Made from heavy duty Nylon/Cordura, the?QSC KLA181 Cover?is designed to protect your KLA181 subwoofer from dust, dirt, and moisture when not in use. The cover has hook-and-loop fastening flaps for accessing the built-in handles of the KLA181 for ease in transport.
QSC Kla181 Cover Soft Padded Cover Constructed From Heavy-Duty Nylon/Cordura? Material
AED 616.59 Exc VATAED 616.59 Exc VAT Add to cart