The OSD Audio SRT1 is a WiFi and Bluetooth streaming pre-amplifier designed to integrate seamlessly into home audio systems. It allows wireless streaming of music from various devices and features an included remote for convenient control. Ideal for enhancing audio setups, the SRT1 offers easy connectivity and high-quality sound in a compact, user-friendly design.
The Ortofon 2M Red Stylus is an optional replacement for your existing Ortofon 2M Red or 2M Blue cartridge. It features a Tipped Elliptical stylus profile.You should upgrade your stylus when it starts to collect a lot of dust after each playback or when you notice some distortion and channel separation during listening.Ortofon 2M Red STYLUS Turntable Needles
AED 303.81 Exc VATAED 303.81 Exc VAT Add to cart- The 2M Red features an improved engine, which provides an increased output of 5.5 mV and an optimized sound reproduction and a high level of sonic accuracy
Ortofon 2M Red Turntable Needles
AED 399.05 Exc VATAED 399.05 Exc VAT Add to cart - The Cadenza Bronze model is using a Replicant 100 stylus and a conical aluminium cantilever. The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire. Field Stabilizing Element/FSE, is used for optimal linearity especially during complex crescendo passages.
Ortofon Cadenza Bronze Turntable Needles
AED 6,189.52 Exc VATAED 6,189.52 Exc VAT Add to cart - Designed to commemorate the release of the limited edition Technics SL-1200LTD and SL-1200GLD, the Concorde Gold was made to compliment the attractive stylings of these limited edition turntables and to provide the best possible sound quality available in a DJ cartridge. Compatible to a very wide range of turntables.
Ortofon Concorde Gold Turntable Needles
AED 703.81 Exc VATAED 703.81 Exc VAT Add to cart - The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.
Ortofon Concorde MKII Club Turntable Needles
AED 541.00 Exc VATAED 541.00 Exc VAT Add to cart - • At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl. • This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal. • Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.
Ortofon Concorde MKII Digital Turntable Needles
AED 465.71 Exc VATAED 465.71 Exc VAT Add to cart - The Concorde DJ is considered the jack-of-all-trades, boasting accurate sound reproduction and excellent groove handling.
Ortofon Concorde MKII DJ Turntable Needles
AED 399.00 Exc VATAED 399.00 Exc VAT Add to cart - Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well. It offers both reasonable output, high sound quality, and good tracking ability for virtually any style of music.
Ortofon Concorde MKII Mix Turntable Needles
AED 322.00 Exc VATAED 322.00 Exc VAT Add to cart - The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching. For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
Ortofon Concorde MKII Scratch Turntable Needles
AED 427.00 Exc VATAED 427.00 Exc VAT Add to cart - The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club. The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.
Ortofon Concorde MKII Twin Club Turntable Needles
AED 1,046.00 Exc VATAED 1,046.00 Exc VAT Add to cart - At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl. This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal. Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.
Ortofon Concorde MKII Twin Digital Turntable Needles
AED 903.81 Exc VATAED 903.81 Exc VAT Add to cart - The Concorde DJ is considered the jack-of-all-trades, boasting accurate sound reproduction and excellent groove handling.
Ortofon Concorde MKII Twin DJ Turntable Needles
AED 760.00 Exc VATAED 760.00 Exc VAT Add to cart - Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well. It offers both reasonable output, high sound quality and a good tracking ability for virtually any style of music. With transparent sound across the spectrum and excellent handling ability, the MIX represents one of the longest running values in DJ cartridges.
Ortofon Concorde MKII Twin Mix Turntable Needles
AED 618.00 Exc VATAED 618.00 Exc VAT Add to cart - The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.
Ortofon Concorde MKII Twin Scratch Turntable Needles
AED 827.00 Exc VATAED 827.00 Exc VAT Add to cart The flagship Ortofon 2M Black utilizes a Shibata stylus (usually not found on cartridges any where near this price). With a heavily upgraded generator and a proprietary body material, the 2M Black is exceedingly fast, detailed yet supremely musical. An excellent value and has earned our highest recommendation!
“The 2M Red is the entry level and 2M Black is the flagship. The 2M Black has a light, fast touch with good treble extension. Its greatest attribute is the way it provides a more transparent window on the world of micro-energies, permitting it to plumb the depths of soundstaging and dimensionality. Their performance is a fitting tribute to Ortofon and chief engineer Per Windfield!”
- Neil Gader, The Absolute Sound, Product of Year Award Issue, January 2009The 2M series of cartridges feature Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have flat frequency response, just like a moving coil cartridge. Ortofon invented the Split pole pin technology and was originally offered in the 500 series and Super OM series.
The 2M series was developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award-winning MC Jubilee and very successful Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality.The 2M series is designed for precise and accurate retrieval of the information in the record groove. Ortofon's philosophy is to make cartridges which reproduce the record grooves as accurately as possible, without coloring the sound. The 2M series design has been optimized for ease of mounting and their weight and size fit virtually any current turntable.
Specifications:
- Output voltage at 1000 Hz, 5cm/sec. 5 mV
- Channel balance at 1 kHz 1 dB
- Channel separation at 1 kHz 26 dB
- Channel separation at 15 kHz 15 dB
- Frequency range at - 3dB 20-31.000 Hz
- Frequency response 20-20.000 + 2 / - 0 dB
- Tracking ability at 315Hz at recommended tracking force 80 µm
- Compliance, dynamic, lateral 22 µm/mN
- Stylus type Nude Shibata
- Stylus tip radius r/R 6/50 µm
- Tracking force range 1.4-1.7g (14-17 mN)
- Tracking force, recommended 1.5 g (15 mN)
- Tracking angle 20°
- Internal impedance, DC resistance 1.2 kOhm
- Internal inductance 630 mH
- Recommended load resistance 47 kOhm
- Recommended load capacitance 150-300 pF
- Cartridge colour, body/stylus Black/Black
- Cartridge weight 7.2 g
- Replacement stylus unit 2M Black
Ortofon Concorde Serato S-120 Turntable Needles
AED 419.00 Exc VATAED 419.00 Exc VAT Add to cartOrtofon-Serato headshell fits any standard DJ turntable connection.
Ortofon Headshell – Serato Turntable Needles
AED 141.00 Exc VATAED 141.00 Exc VAT Add to cartThis black Ortofon Headshell will accomodate most DJ cartridges but is particularly useful for mounting the Ortofon OM series cartridges onto turntables. The headshell features a black finish that complements their Nightclub, Nightclub II, and Pro S model cartridges.
Ortofon Headshell – SH-4BK Black Turntable Needles
AED 139.00 Exc VATAED 139.00 Exc VAT Add to cartThis blue Ortofon Headshell will accomodate most DJ cartridges but is particularly useful for mounting the Ortofon OM series cartridges onto turntables. The headshell features a black finish that compliments their Nightclub, Nightclub II and Pro S model cartridges.
Ortofon Headshell – SH-4BL Blue Turntable Needles
AED 139.00 Exc VATAED 139.00 Exc VAT Add to cart- AED 3,303.00 Exc VAT Add to cart
- REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge. Adjusting the height of your Rega tonearm is easy It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play. 3.2 - 4 mm spacers should be enough for Quintet cartridge.
Ortofon MC Quintet Blue Turntable Needles
AED 1,703.00 Exc VATAED 1,703.00 Exc VAT Add to cart - REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge. Adjusting the height of your Rega tonearm is easy. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play. 3.2 - 4 mm spacers should be enough for Quintet cartridge.
Ortofon MC Quintet Bronze Turntable Needles
AED 2,503.00 Exc VATAED 2,503.00 Exc VAT Add to cart - REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge. Adjusting the height of your Rega tonearm is easy. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play. 3.2 - 4 mm spacers should be enough for Quintet cartridge.
Ortofon MC Quintet Red Turntable Needles
AED 1,199.00 Exc VATAED 1,199.00 Exc VAT Add to cart The OM 1S is a magnetic cartridge (MM) with a Spherical shaped stylus that provides balanced and distortion-free playback for general purpose applications.
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.
If your tonearm is an standard tonearm, just leave the weight-plate.
If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5gOrtofon OM 1s Turntable Needles
AED 199.00 Exc VATAED 199.00 Exc VAT Add to cart- OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.
Ortofon OM 5 E Turntable Needles
AED 199.00 Exc VATAED 199.00 Exc VAT Add to cart Technical specifications
Frequency range: 20-24.000 Hz Frequency response: 20-20.000 Hz + 3 / - 1 dB Tracking ability at 315Hz at recommended tracking force*): 70 µm Compliance, dynamic, lateral: 20 µm/mN Stylus type: Elliptical Stylus tip radius: r/R 8/18 µmTracking force range: 1.25-1.75 g (12.5-17.5 mN) Tracking force, recommended: 1.5 g (15 mN) Tracking angle: 20° Stylus colour: BlackOrtofon OM-10 STYLUS Turntable Needles
AED 199.00 Exc VATAED 199.00 Exc VAT Add to cart- The Ortofon OM 5E is a low-mass moving magnet cartridge with an elliptical stylus, well suited for music lovers and Hi-Fi enthusiasts. The cartridge body has been designed to provide easy mounting and alignment on both top-mount and bottom-mount headshells.
Ortofon OM-5E STYLUS Turntable Needles
AED 170.00 Exc VATAED 170.00 Exc VAT Add to cart The 2M Mono features an improved engine, which provides a high level of sonic accuracy. The stylus' tip features a R 18µm Nude Spherical diamond that is an optimal solution for playing mono microgroove LP vinyl records. The cartridge body is manufactured from Hopelex, which ensures high rigidity while eliminating unwanted resonances.
The 2M Mono uses a strapped output to deliver the same output signal from both sets of pole pins. This effectively eliminates the need for mono-specific equipment, making it possible to enjoy true mono reproduction on any stereo playback system.Ortofon Ortofon 2M Mono Ortofon 2M Mono Moving Magnet Cartridge
AED 1,427.62 Exc VATAED 1,427.62 Exc VAT Add to cartCadenza Bronze is a true high-end reference cartridge, conveying music with supreme precision, impact and dynamics. The Cadenza Bronze model is using a Replicant 100 stylus and a conical aluminium cantilever. The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire. Field Stabilizing Element/FSE, is used for optimal linearity especially during complex crescendo passages. Cadenza Bronze stereo imaging capabilities illuminate the farthest corners of the soundstage in all three dimensions.
Ortofon Ortofon Cadenza Bronze Ortofon MC Cadenza Bronze
AED 7,141.90 Exc VATAED 7,141.90 Exc VAT Add to cartThe Cadenza Black model is using a Nude Shibata stylus with a boron cantilever. The effective mass of the stylus/cantilever system is extremely low due to the use of a very thin boron rod. This material is extremely stiff and even more lightweight than aluminium. It also uses the WRD/Wide Range Damping-system applied for MC Windfeld, MC A90, MC Anna, Xpression and MC A95 cartridges, controlling the high and low frequency damping separately.The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire. Cadenza Black is high performing on areas like detail, consistency and sound staging.
Ortofon Ortofon MC Cadenza Black Ortofon MC Cadenza Black
AED 9,522.86 Exc VATAED 9,522.86 Exc VAT Add to cart- The 1S has been developed to give as many people as possible access to the superior audio reproduction Ortofon are recognised for worldwide.
Ortofon Stylus 1s Turntable Needles
AED 151.00 Exc VATAED 151.00 Exc VAT Add to cart - Replacement stylus for Concorde MKII CLUB, the professional elliptical stylus of the Ortofon catalog designed for DJs looking for excellent sound quality. The stylus for Concorde of the MKII series SONO wider and more robust than the previous models, comfortable to handle and with optimized fixing by means of a metal spring that allows us to feel the correct installation by touch.
Ortofon Stylus CC MKII Club Turntable Needles
AED 228.00 Exc VATAED 228.00 Exc VAT Add to cart - Replacement Stylus for Concorde MK II Digital. Designed to optimize timecode playback by extending the usable life of timecode vinyl and minimizing errors in decoding. Cut-out area in the front allows for far more accurate needle drops. Replacement stylus offers a tactile feedback when seating. Recommended Tracking for is 4.0 g
Ortofon Stylus CC MKII Digital Turntable Needles
AED 180.00 Exc VATAED 180.00 Exc VAT Add to cart - For Concord DJ MKII system
- Spherical cut
- Output voltage: 6 mV
- Frequency range: 20 - 20,000 Hz
- Suitable for scratching and back-uping
Ortofon Stylus CC MKII DJ Turntable Needles
AED 148.00 Exc VATAED 148.00 Exc VAT Add to cart- Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well. • It offers both reasonable output, high sound quality and a good tracking ability for virtually any style of music. • With transparent sound across the spectrum and excellent handling ability, the MIX represents one of the longest running values in DJ cartridges.Excellent price-to-performance ratio.
Technical Data:
Stylus Type: SphericalTracking Force: 3.0gOutput Range: 6 mVFrequency Range: 20-20,000 HzOrtofon Stylus CC MKII Mix Turntable Needles
AED 113.33 Exc VATAED 113.33 Exc VAT Add to cart Technical specifications
- Larger, wider and more robust stylus body
- Easier to grip and handle
- Better fix by metal spring
- Tactile feedback of correct mount
- Large stylus viewing cut?out
- Output voltage at 1000Hz, 5cm/sec. - 10 mV
- Channel balance at 1kHz - 1 dB
- Channel separation at 1kHz - 22 dB
- Channel separation at 15 kHz - 15 dB
- Frequency range at -3dB - 20-18.000 Hz
- Tracking ability at 315 Hz at recommmended tracking force - 120 μm
- Compliance, dynamic lateral - 14 μm/m N
- Stylus type - Spherical R 18 μm
- Tracking force range - 3 - 5 g
- Tracking force recommended - 4 g
- Recommended exclusively for Concorde MkII SCRATCH
Ortofon Stylus CC MKII Scratch Turntable Needles
AED 160.00 Exc VATAED 160.00 Exc VAT Add to cart- Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantileverFeatures Special Elliptical stylus and a special developed and extremely balanced cantilever.
Ortofon Stylus DJ E Turntable Needles
AED 189.52 Exc VATAED 189.52 Exc VAT Add to cart The OSD FS12 is a powerful 12" dual-ported powered subwoofer delivering up to 1200W of deep, chest-thumping bass. Designed for home theaters and audio enthusiasts, it features a high-efficiency amplifier and a front-firing woofer in a sleek, acoustically optimized cabinet for immersive low-frequency performance.
OSD Audio FS12 12″ Dual Ported 1200W Powered Subwoofer
AED 4,010.00 Exc VATAED 4,010.00 Exc VAT Add to cart- AED 1,760.00 Exc VAT Add to cart
The OSD Audio FS15 is a high-performance 15" front-firing powered subwoofer engineered to deliver deep, room-shaking bass down to 15Hz at -3dB, meeting CEDIA’s Level 4 home theater standards. Equipped with an 800W RMS amplifier (1600W peak), it produces a maximum SPL of 118dB, making it ideal for audiophiles and home theater enthusiasts seeking exceptional low-frequency performance. Its triple front-mounted ports and reinforced paper cone woofer ensure minimal distortion and enhanced bass extension. Additional features include a built-in DSP for fine-tuning, signal sensing on/off for energy efficiency, and a frequency response range of 15Hz to 200Hz. With a sleek black finish and dimensions of 19" x 24" x 27", the FS15 combines power and aesthetics for an immersive audio experience
OSD Audio FS15 15″ Front Firing Triple Ported Powered Subwoofer 800W RMS – 1600 Peak 15Hz @ -3dB
AED 7,702.00 Exc VATAED 7,702.00 Exc VAT Add to cart- The OSD Audio IW525LCR is a versatile in-wall speaker designed for high-fidelity home theater systems. Featuring dual 5.25" polypropylene woofers and a 1" pivoting silk dome tweeter, it delivers clear bass, smooth midrange, and crisp highs. With a power handling capacity of 150 watts and an impedance of 8 ohms, it ensures dynamic sound reproduction. The speaker includes a paintable grille and dog-ear mounting brackets for easy installation, making it a discreet and stylish addition to any room.
OSD Audio IW525LCR 150W 5.25” in-Wall LCR Speaker – Center Channel with Dual Woofers
AED 713.00 Exc VATAED 713.00 Exc VAT Add to cart - The OSD Audio IW550LCR is a high-performance, trimless in-wall speaker designed for LCR (left, center, right) channel applications. It features dual 5.25" carbon fiber woofers and a 1" ceramic-coated aluminum dome tweeter, delivering clear, dynamic sound with excellent bass and crisp highs. Its sleek, frameless design ensures a minimal visual impact, and the speaker is paintable to match any décor. Ideal for home theater systems, it provides flexibility, easy installation, and robust power handling up to 150 watts.
OSD Audio IW550LCR 5.25″ Trimless in Wall Speaker, LCR Channel Speaker, Dual Carbon Fiber Woofer
AED 701.00 Exc VATAED 701.00 Exc VAT Add to cart The OSD Audio IWLCR53 Nero is a powerful in-wall LCR speaker engineered for home theater setups. It comes equipped with dual 5.25" graphite woofers and a 1" silk horn-loaded tweeter, producing rich, dynamic audio with deep lows and crisp highs. With a power capacity of up to 150 watts and a frequency range of 50Hz to 20kHz, it delivers excellent sound clarity and depth. Its trimless design and magnetic, paintable grille offer a clean, seamless look that blends effortlessly into any room.
OSD Audio IWLCR 53 Nero Dual 5.25″ in Wall LCR Speaker 150W, 1″ Silk Horn Tweeter, Single
AED 655.00 Exc VATAED 655.00 Exc VAT Add to cartThe OSD Audio IWLCR55 Nero is a premium in-wall LCR speaker featuring dual 5.25" Kevlar woofers and a 1" aluminum horn-loaded tweeter for powerful, detailed sound. With 160W power handling, a 45Hz–20kHz frequency response, and a sleek trimless design, it’s ideal for high-performance home theater setups.
OSD Audio IWLCR 55 Nero Dual 5.25″ in Wall LCR Speaker 160W, 1″ Aluminum Horn Tweeter, Single
AED 795.00 Exc VATAED 795.00 Exc VAT Add to cartThe OSD Audio IWS-10 is a passive 10" in-wall subwoofer designed to deliver deep, room-filling bass without occupying floor space. Featuring a polypropylene woofer with a butyl rubber surround, it offers a frequency response from 38Hz to 200Hz and handles up to 200 watts of power. The subwoofer includes an "Easy In" mounting bracket for straightforward installation and a paintable grille to seamlessly blend with your decor. Ideal for enhancing home theater systems, it requires an external amplifier for optimal performance.
OSD Audio IWS-10 10″ in Wall Subwoofer 200W Easy Install, Paintable Grill IWS10
AED 792.00 Exc VATAED 792.00 Exc VAT Add to cart- The OSD Audio IWS-8 is a passive 8" in-wall subwoofer designed to deliver deep, room-filling bass without occupying floor space. It features an 8" polypropylene woofer with a butyl rubber surround, ensuring high performance and durability. The subwoofer offers a frequency response from 40Hz to 200Hz and handles up to 150 watts of power. Its 8-ohm impedance makes it compatible with a variety of amplifiers. Installation is facilitated by the included dog-ear mounting brackets, and the paintable grille allows for seamless integration into your room's decor.
OSD Audio IWS-8 8″ in Wall Subwoofer 150W Easy Install, Paintable Grill
AED 555.00 Exc VATAED 555.00 Exc VAT Add to cart The OSD Audio IWS-88 is a passive in-wall subwoofer designed to deliver deep, room-filling bass without occupying floor space. It features dual 8" injected polypropylene woofers with a reinforced back plate, enhancing low-frequency performance and structural rigidity. With a power handling capacity of 350 watts and a frequency response range of 38Hz to 500Hz, it provides robust bass for home theater and audio applications. The subwoofer includes a paintable grille and a cutout template for easy installation, making it a seamless addition to any room decor. Please note that this is a passive speaker and requires an external amplifier for operation.
OSD Audio IWS-88 350W Wall Mounted Subwoofer for Home Theater with Dual 8″ Injected Subwoofer with Rear Bridge to Enhance Bass
AED 795.00 Exc VATAED 795.00 Exc VAT Add to cartThe OSD Audio IWS-DUAL18 is a powerful 8" in-wall subwoofer featuring dual graphite cone woofers that deliver up to 350W of deep, room-filling bass. Designed for seamless integration, it includes a reinforced back bridge, easy-mount dog-ear brackets, and a paintable magnetic grille—perfect for home theaters and space-saving audio setups.
OSD Audio IWS-DUAL18 8″ in Wall Subwoofer 350W Reinforced Back Bridge, Easy Install, Paintable Grill, IWS88
AED 1,089.00 Exc VATAED 1,089.00 Exc VAT Add to cartThe OSD Audio KIT-R10 is a powerful 10" in-ceiling subwoofer featuring a long-excursion graphite woofer that delivers deep, clean bass with up to 200W of power. Its trimless magnetic grille blends seamlessly into ceilings, while the included mounting bracket ensures easy installation—perfect for home theaters and whole-house audio systems.
OSD Audio KIT-R10 10″ in Ceiling Subwoofer w/Long Excursion Graphite Woofer, 200W w/in Ceiling Bracket
AED 1,045.00 Exc VATAED 1,045.00 Exc VAT Add to cart
