The Crown XFMR-4 and XFMR-8 are rack-mountable transformers to provide impedance matching between amplifier outputs and “constant voltage” loudspeakers. This unit allows amplifiers without direct 70Vrms or 100Vrms output capability to drive distributed speaker systems designed to operate at those voltages.
System integrators working on challenging 21st century installed sound applications require equipment that is versatile, compact, and highly efficient. Look no further than the 4-channel Crown Audio DCI 4|600N, a 600W DriveCore Install BLU Link network amplifier with advanced features and flexibility. The amplifier provides analog and digital inputs, network monitoring and control, programmable General Purpose Input/Output (GPIO) ports, and on-board Digital Signal Processing (DSP). The amplifier also meets EN 54-16 compliance for life safety systems to serve the needs of hospitality, large venues, and other markets.
The 2 RU 4/600N can produce up to 600W of output per channel at 2, 4, 8 or 16 ohms or 70 or 100 Vrms. It is compatible with Harman's BLU Link digital audio transport and accepts digital inputs via its rear-panel RJ-45 connectors. This digital control allows for networked monitoring, recallable presets, and the setup of secondary inputs that engage if the primary inputs fail. The built-in DSP capabilities include limiting, input/output EQs, delay, and a matrix mixer.
Each channel pair can be bridged for powering higher power applications such as a subwoofer. The 4|600N also has channel-independent high- or low-impedance output that is selectable from the rear-panel DIP switches. This allows you to integrate the amplifier into a variety of different setups. Each of its 4 channels additionally features independent attenuators with a range from 0 to -80 dB.Crown Audio DCI4 | 600N-U-EKFX 4-Channel 300W Power Amplifier
AED 18,262.17 inc VATAED 18,262.17 inc VAT Add to cart- The Crown Audio DCi 8|300 DriveCore Install Analog Series is an 8-channel amplifier capable of producing 300 watts of output per channel and works with 2, 4, 8, and 16 Ohms or 70 or 100 Vrms. Channels can be bridged for powering higher-power applications such as a subwoofer. The DCi 8|300 also has channel-independent high- or low-impedance output that is selectable from the rear-panel DIP switches. This allows you to integrate the amplifier into a variety of different setups. Each of its 8 channels additionally features independent attenuators with an attenuation range from 0 to -95 dB.The front panel of the DCi 8|300 provides a series of system indicators, including level and signal, ready, clip, thermal, and fault alerts for quick visual monitoring of the system. The unit can be integrated into a control system for powering on and off as well as engaging its sleep mode for saving energy when not in use. The DCi 8|300 is 2 RU rackmountable and ships an IEC power cord.
Crown Audio DCI8 | 300-U-EKFX 8-Channel, 300W Analog Power Amplifier
AED 19,632.30 inc VATAED 19,632.30 inc VAT Add to cart For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport. This amplifier is EN 54-16 Compliant for life safety applications.
Crown Audio DCI8 | 300DA-U-EKFX 300W 8-Channel Power Amplifier
AED 23,644.53 inc VATAED 23,644.53 inc VAT Add to cart- The 300W, high-performance Crown Audio DCI8300N 8-Channel DriveCore Install Series Network Amplifier is designed for system integrators looking for 21st century advanced features for installed sound applications. The amplifier utilizes Harman DriveCore technology, featuring a patented integrated circuit that combines hundreds of discrete circuits into a single chip for lower power, better performance, and improved reliability.The Class-D amplifier works with impedance loads from 2 to 16 ohms plus 70/100V speakers. The rear panel sports two BLU link connectors capable of delivering 256 channels of digital audio over a standard Cat 5e cable. Additionally, a standard Ethernet connector provides HiQnet Audio Architect control via a Cat 5e port, while the programmable GPIO control port allows for control from analog components such as volume dials.The onboard digital signal processor provides input/output EQ filters, crossovers, time-alignment delay, and LevelMAX limiters for outstanding protection. Additional protection circuits include shorted outputs, DC, mismatched loads, overheating, over- or under-voltage, and high-frequency overload. The DCI8300N ships with a power cord.
Crown Audio DCI8 | 300N 8-Channel DriveCore Install Series Network Amplifier (300W)
AED 25,980.05 inc VATAED 25,980.05 inc VAT Add to cart - The new DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore™ technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.
Crown Audio DCI8 | 600-U-EKFX 8-Channel 600W Analog Power Amplifier
AED 40,448.69 inc VATAED 40,448.69 inc VAT Add to cart For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport. This amplifier is EN 54-16 Compliant for life safety applications.
Crown Audio DCI8 | 600DA-U-EKFX 600W 8-Channel Power Amplifier
AED 35,243.25 inc VATAED 35,243.25 inc VAT Add to cartThe DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.
Crown Audio DCI8 | 600N-U-EKFX 8-Channel 600W Analog Power Amplifier
AED 35,243.25 inc VATAED 35,243.25 inc VAT Add to cartThe new DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore™ technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications.Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.
Crown Audio DCI8 | 600ND-U-EKFX 8-Channel 600W Power Amplifier
AED 38,767.59 inc VATAED 38,767.59 inc VAT Add to cart- Cinema managers and integrators looking to maximize their power investment and future-proof their systems will be thrilled with the DSi-Series MA4, a 700W 4-channel power amplifier that's designed for JBL cinema loudspeakers offering outstanding quality and performance in a rack-mountable enclosure.The amplifier features a remarkable 96 kHz/32-bit digital signal processing with delay, 8-band parametric EQ, crossovers, FIR processing, LevelMAX limiting, and more. The integrated DriveCore technology incorporates hundreds of amplifier components into a single chip for superior efficiency and reliability. With its updated design, the MA4 allows for high power output at 2 ohms, enabling up to four surround speakers to be powered by a single channel. There are built-in cinema speaker tuning presets that match all JBL cinema loudspeakers for optimal performance, protection, and easy deployment.The font panel features an LCD and encoder to configure amplifier settings and mute channels at the touch of a button. The rear panel provides four analog inputs via two Euroblock connectors and two terminal strip speaker outputs to connect up to four speakers. A HiQnet (RJ45) port allows the amplifier to connect with HARMON Audio Architect control software over a standard TCP/IP network. A GPIO/AUX port allows you to externally recall presets, mute channels, monitor amplifier health and power the amplifier on or off.
Crown Audio DSi 2.0 Series MA4 700W 4-Channel Amplifier for JBL Cinema Loudspeakers
AED 16,538.81 inc VATAED 16,538.81 inc VAT Add to cart - Cinema managers and integrators looking to maximize their power investment and future-proof their systems will be thrilled with the DSi-Series MA4-D, a 700W 4-channel power amplifier that's designed for JBL cinema loudspeakers offering outstanding quality and performance in a rack-mountable enclosure.The amplifier features a remarkable 96 kHz/32-bit digital signal processing with delay, 8-band parametric EQ, crossovers, FIR processing, LevelMAX limiting, and more. The integrated DriveCore technology incorporates hundreds of amplifier components into a single chip for superior efficiency and reliability. With its updated design, the MA4-D allows for high power output at 2 ohms, enabling up to four surround speakers to be powered by a single channel. There are built-in cinema speaker tuning presets that match all JBL cinema loudspeakers for optimal performance, protection, and easy deployment.The font panel features an LCD and encoder to configure amplifier settings and mute channels at the touch of a button. The rear panel provides four analog inputs via two Euroblock connectors and two terminal strip speaker outputs to connect up to four speakers. A HiQnet (RJ45) port allows the amplifier to connect with HARMON Audio Architect control software over a standard TCP/IP network. A GPIO/AUX port allows you to externally recall presets, mute channels, monitor amplifier health and power the amplifier on or off. The MA4-D includes DANTE/AES67 support for seamless integration with Dolby Atomos Connect and other interfaces
Crown Audio DSi 2.0 Series MA4-D 700W 4-Channel Amplifier for JBL Cinema Loudspeakers (Dante)
AED 18,406.01 inc VATAED 18,406.01 inc VAT Add to cart - Cinema managers and integrators looking to maximize their power investment and future-proof their systems will be thrilled with the DSi-Series SA4-D, a 350W 4-channel power amplifier that's designed for JBL cinema loudspeakers offering outstanding quality and performance in a rack-mountable enclosure.The amplifier features a remarkable 96 kHz/32-bit digital signal processing with delay, 8-band parametric EQ, crossovers, FIR processing, LevelMAX limiting, and more. The integrated DriveCore technology incorporates hundreds of amplifier components into a single chip for superior efficiency and reliability. With its updated design, the SA4-D allows for high power output at 2 ohms, enabling up to four surround speakers to be powered by a single channel. There are built-in cinema speaker tuning presets that match all JBL cinema loudspeakers for optimal performance, protection, and easy deployment.The font panel features an LCD and encoder to configure amplifier settings and mute channels at the touch of a button. The rear panel provides four analog inputs via two Euroblock connectors and two terminal strip speaker outputs to connect up to four speakers. A HiQnet (RJ45) port allows the amplifier to connect with HARMON Audio Architect control software over a standard TCP/IP network. A GPIO/AUX port allows you to externally recall presets, mute channels, monitor amplifier health and power the amplifier on or off. The LA4-D includes DANTE/AES67 support for seamless integration with Dolby Atomos Connect and other interfaces.
Crown Audio DSi 2.0 Series SA4-D 350W 4-Channel Amplifier for JBL Cinema Loudspeakers Dante
AED 12,996.10 inc VATAED 12,996.10 inc VAT Add to cart The Crown DSi 8Mn is a projection booth monitor designed to work with digital cinema systems using the Crown DSi Series amplifiers. The unit is designed to meet remote-level and remote-audio monitoring requirements and expands upon the standard booth monitor to allow network monitoring of cinema audio for quality control purposes.
Network monitoring of a large network operations center allows the manager to monitor auditorium audio from the office. The DSi 8Mn also serves the standard booth monitor purpose of allowing listening to various audio channels through the front-panel speaker or headphones.
The front panel and a web browser provide all the controls necessary for the daily operation of the DSi 8Mn. Controls are easily accessible from the front panel or from a web browser interface. Eight-channel monitoring allows you to monitor either the inputs from the cinema processor or the power amplifier’s outputs: L,C, R, Ls, Rs, Lrs, Rrs, and LFEs in any combination.
The rear panel provides Phoenix and HD-15 connectors for quick connection to power amplifiers. All inputs and outputs are balanced, and the unit features a universal power supply. There are no special tools required for installation. The built-in VU meter test jack provides the technician with immediate information about the status of the DSi 8Mn and all power amplifiers. The DSi 8Mn includes a power cord.
Crown Audio DSi 8Mn Projection Booth Monitor for Network Digital Cinema Systems
AED 11,797.14 inc VATAED 11,797.14 inc VAT Add to cart- Crown Audio DSi-6000 2-Channel Solid-State Power Amplifier has presets for industry-standard JBL loudspeaker systems, which are set up quickly and easily thanks to an intuitive backlit LCD. Also switch to our store Sound Town Electronics for more affordable products at amazing price that you are actually looking for. A USB connection allows you to connect to a computer to configure HiQnet System Architect software. Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. A rear-panel HD-15 connector provides connectivity between DSi amplifiers and the DSi-8M System Monitor. The switch-mode universal power supply gives the DSi-6000 terrific power flexibility.
Crown Audio DSi6000 2-Channel Solid-State Power Amplifier
AED 14,707.34 inc VATAED 14,707.34 inc VAT Add to cart - he 135MA from Crown Audio is a professional-quality mixer/amplifier designed for commercial applications, such as paging, background music, and music-on-hold systems. It has 3 inputs, each with a volume control, and a 35W amplifier output. Signals can be input via the balanced Phoenix or stereo RCA inputs. Output can be via 8 Ohm or 70/100V constant voltage outputs. A telephone output is also provided.The mixer/amplifier features priority muting, which can be achieved by VOX or an external switch. The master output has a front-panel level control knob, as well as individual bass and treble controls. All of these terrific features are packed into a compact housing with a weight under 10 pounds.
Crown Audio G135MAE60 3×1 35W Commercial Mixer/Amplifier
AED 1,123.50 inc VATAED 1,123.50 inc VAT Add to cart Each channel features a complete compliment of OMNIDRIVEHD™ Processing, including the acclaimed LevelMAX™ Limiter Suite, and support for linear phase FIR filters as used in the latest JBL V5 loudspeaker tunings. Combine that with Crown’s patented Class-I technology delivering uncompromising power output across all four channels, and it’s easy to see why the I-Tech 4x3500HD is the flagship tour sound amplifier from Crown.
Crown Audio I-Tech 43500HD 4-Channel, 4000W Power Amplifier
AED 58,141.86 inc VATAED 58,141.86 inc VAT Add to cartPower your stage in style with the technologically advanced Crown I-Tech 4x3500HD power amplifier. The I-Tech 4x3500HD is a professional-level touring amplifier designed for the rigors of the road. This amp is so groundbreaking that its technology features five new patents, three of which are on the power supply. Crown's new BSS OMNIDRIVEHD processing engine is at the heart of the I-Tech HD amps. With four times the processing power, the I-Tech 4x3500HD features Linear Phase FIR filters and LevelMAX limiters for precise and crystal-clear sound. A color LCD screen rounds out the I-Tech 4x3500HD’s cutting-edge feature set.
Crown Audio I-Tech 4x3500HDs Power Amplifier with Binding Posts
AED 58,141.86 inc VATAED 58,141.86 inc VAT Add to cart- The Crown I-Tech 5000HD professional power amplifier is built for demanding live sound and installation environments. It provides powerful two-channel amplification with up to 2500 watts per channel, ensuring strong and reliable performance for large speaker systems. The amplifier includes advanced digital signal processing that allows audio engineers to precisely tune and protect their sound systems. Multiple connectivity options such as analog, AES/EBU, and network control make it easy to integrate into modern audio setups. With its durable rackmount design and efficient cooling system, the I-Tech 5000HD is a dependable solution for professional audio applications.
Crown Audio I-Tech 5000HD Professional Power Amplifier
AED 33,736.86 inc VATAED 33,736.86 inc VAT Add to cart - Building on the decades of innovation, invention, and insight Crown is known for, the I-Tech HD features five new patents – three on the power supply alone – giving you an amp that goes well beyond the expected.  At the heart of the new I-Tech HD is the BSS OMNIDRIVEHD™ processing engine. Four times faster than its predecessor and featuring Linear Phase FIR filters and LevelMAX™ limiters, OMNIDRIVEHD provides unmatched clarity and sonically pure signal processing.Building on the decades of innovation, invention, and insight Crown is known for, the I-Tech HD features five new patents – three on the power supply alone – giving you an amp that goes well beyond the expected.  At the heart of the new I-Tech HD is the BSS OMNIDRIVEHD™ processing engine.
Crown Audio IT12000HD Two-Channel 4500W Power Amplifier
AED 34,443.31 inc VATAED 34,443.31 inc VAT Add to cart - The VRack Amplification System Rack from Crown Audio is comprised of a rugged touring rack fitted with three IT4X35000HD DriveCore Series amplifiers, a power input panel, and a custom engineered input panel. The input panel is mounted at the top rear and supplies CobraNet network connections as well as AES/EBU and analog XLR connections. The front-mounted power panel includes a 5-pin Hubbell Twist-Lock connector and a 5-pin CEE-Form connector.The VRack features Colson 3.5" polyurethane casters rated at 250 lb each, a Polycarbonate, UV stabilized front see-through door, shockmounting using 8 neoprene rubber isolators, and a captive pocket door system with a single-slam latch.
Crown Audio VRack 4 | 35000HDAmplification System Rack on Wheels with Three I-Tech Amplifiers
AED 183,322.77 inc VATAED 183,322.77 inc VAT Add to cart Crown's CXM2000 is a Cinema Monitor and Crossover System. With the CXM2000, audiences can enjoy wonderful sound from JBL cinema speakers. When used with Crown amplifiers, it allows for either processor input signal or amplifier output signal monitoring, which immediately indicates when a signal path has a problem. The fault signal can also be passed to TMS (Theater Management System), so the cinema manager can check the audio system working status without leaving his office. All necessary controls for daily operation of the CXM2000 are easily accessible on the front panel. This device will significantly improve the speaker audio performance and offer peace of mind in the operation of a theater system. Crown CXM2000, Crown cinema amplifiers and JBL cinema speakers constitute the Harman total solution for cinema owners who share the same goal of introducing stable and high-quality movie-watching experience with HARMAN.
Crown CROCXM2000V Cinema Monitor Crossover Amplifier
AED 6,976.01 inc VATAED 6,976.01 inc VAT Add to cart- The 300W Crown Audio CDi 2|300 2-Channel DriveCore Series Power Amplifier with BLU Link utilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 2|300 offers streamlined functionality for most small- to medium-sized installation such as restaurants, retail stores, and more. The DriveCore integrated circuit eliminates hundreds of components within the amplifier, reducing the variability of component values and increasing reliability, resulting in remarkable audio fidelity from an efficient design. The 2-channel amplifier is simple to use and includes a network control & monitoring, an advanced DSP circuit, and an easy-to-use, front-panel interface. The amplifier is equipped with two BLU Link RJ45 connectors, which can receive and send 256 fault-tolerant audio channels.The amplifier is capable of driving up to 100Vrms speaker loads without requiring a transformer and comes pre-loaded with JBL speaker tunings to help make installations quicker and easier. The CDi 2|300 features an Ethernet port for using HARMAN's HiQnet Audio Architect software for configuration and operation over a standard TCP/IQ network. The rear panel includes terminal block inputs and barrier strip outputs.
Crown DriveCore CDi 2|300BL Analog + BLU link input Amplifier, 2 channel, 300W per output channel
AED 6,688.50 inc VATAED 6,688.50 inc VAT Add to cart - The EOL box is used as an End of Line (EOL) termination in audio systems that use a 20kHz pilot tone to detect open and short conditions. The termination is placed at the farthest end of the loudspeaker circuit. Unlike most loudspeakers the EOL box is reactive at 20kHz such that the resulting current can be measured using HiQnet Audio Architect™ software. If the circuit is either opened or shorted, the measured 20kHz current will change. The EOL box presents either a 10Ω or 5Ω load at 20kHz, selectable using an external impedance switch. This method requires the 20kHz pilot tone to be mixed together with the audio. The pilot tone can be generated within the DCi Network family of amplifiers and the USP4 family of CTs amplifiers. Additionally the DSP built into the DCi Network and USP4 has the ability to allow for the pilot tone to bypass the internal speaker processing.
Crown GEOLBOX End-of-Line Terminator
AED 2,174.63 inc VATAED 2,174.63 inc VAT Add to cart Inside and out, the I-Tech HD is one of the most technologically advanced professional touring amplifiers on the market today. Building on the decades of innovation, invention, and insight Crown is known for, the I-Tech HD features five new patents – three on the power supply alone – giving you an amp that goes well beyond the expected. At the heart of the new I-Tech HD is the BSS OMNIDRIVEHD™ processing engine. Four times faster than its predecessor and featuring Linear Phase FIR filters and LevelMAX™ limiters, OMNIDRIVEHD provides unmatched clarity and sonically pure signal processing.
Crown IT9000HD 2-Channel 3500W Power Amplifier
AED 27,744.82 inc VATAED 27,744.82 inc VAT Add to cart- The CDi Series amplifiers are professional tools designed and built for installed sound applications. The series includes four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000. All are rugged and lightweight, and offer unmatched value in their class.The CDi Series amplifiers are professional tools designed and built for installed sound applications. The series includes four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000. All are rugged and lightweight, and offer unmatched value in their class.Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs. Switch-mode universal power supply. Intuitive front-panel LCD screen for quick, easy configuration. Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. Up to 20 user defined DSP presets are available.
Crown NCDI1000E60 Two-channel, 500W Power Amplifier
AED 5,014.52 inc VATAED 5,014.52 inc VAT Add to cart - The CDi Series amplifiers are professional tools designed and built for installed sound applications. The series includes four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000. All are rugged and lightweight, and offer unmatched value in their class.Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs. Switch-mode universal power supply. Intuitive front-panel LCD screen for quick, easy configuration. Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. Up to 20 user defined DSP presets are available.
Crown NCDI2000E60 Two-channel, 800W Power Amplifier
AED 6,644.40 inc VATAED 6,644.40 inc VAT Add to cart - The CDi Series amplifiers are professional tools designed and built for installed sound applications. The series includes four models which are identical except for output power: CDi 4000, CDi 2000, CDi 4000, and CDi 6000. All are rugged and lightweight, and offer unmatched value in their class.Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs. Switch-mode universal power supply. Intuitive front-panel LCD screen for quick, easy configuration. Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. Up to 20 user defined DSP presets are available.Up to 20 user defined DSP presets are available. Switch-mode universal power supply. Intuitive front-panel LCD screen for quick, easy configuration. Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs.
Crown NCDI4000E60 Two-channel 1200W Power Amplifier
AED 8,841.00 inc VATAED 8,841.00 inc VAT Add to cart - The 600W Crown Audio CDi 4|600 4-Channel DriveCore Series Power Amplifierutilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 4|600 offers streamlined functionality for most medium-sized installation such as cinema, houses of worship, bars, lounges, and more.The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4|600 offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges, and more. Designed for ease-of-use in a variety of applications.
Crown NCDI4X600BL-U-EU Drive Core Series Power Amplifier
AED 13,608.40 inc VATAED 13,608.40 inc VAT Add to cart - Powering this remarkable amplifier is the pioneering technology of DriveCore™, which integrates the amplifier drive stage into the power output stage fusing everything into a chip the size of a dime. DriveCore's front-end drive circuits leverage the inherent efficiency of Class D output stages while also maintaining superb sonic characteristics.The end result is an audio amplifier circuit that exhibits the exemplary audio quality of a highly evolved Class AB design.DriveCore's front-end drive circuits leverage the inherent efficiency of Class D output stages while also maintaining superb sonic characteristics.DriveCore's front-end drive circuits leverage the inherent efficiency of Class D output stages while also maintaining superb sonic characteristics. Powering this remarkable amplifier is the pioneering technology of DriveCore™, which integrates the amplifier drive stage into the power output stage fusing everything into a chip the size of a dime.
Crown NCT4150A-U-EU Four-channel, 125W Power Amplifier
AED 4,809.00 inc VATAED 4,809.00 inc VAT Add to cart - Powering this remarkable amplifier is the pioneering technology of DriveCore™, which integrates the amplifier drive stage into the power output stage fusing everything into a chip the size of a dime. DriveCore's front-end drive circuits leverage the inherent efficiency of Class D output stages while also maintaining superb sonic characteristics. The end result is an audio amplifier circuit that exhibits the exemplary audio quality of a highly evolved Class AB design.
Crown NCT475A-U-EU Four-Channel 75W Power Amplifier
AED 4,084.50 inc VATAED 4,084.50 inc VAT Add to cart The Crown NXLS2002-34-EU is a two-channel power amplifier delivering 650W per channel at 4Ω. It features Class D amplification with Crown's DriveCore technology, ensuring high efficiency and lightweight design. The amplifier includes a PureBand Crossover System with selectable filters (low-pass, high-pass, and band-pass), Peakx™ Limiters for speaker protection, and a large LCD display for monitoring. Connectivity options encompass XLR, 1/4", and RCA inputs, along with speakON and binding post outputs. Designed for versatility, it supports stereo, bridged, and Y-mode operation. The amplifier is housed in a 2U rackmount chassis and weighs approximately 4.9 kg.
Crown NXLS2002-34-EU Two-channel, 650W @ 4? Power Amplifier
AED 3,915.86 inc VATAED 3,915.86 inc VAT Add to cartThe Crown NXLS2502-34-EU is a two-channel power amplifier delivering 775W per channel at 4Ω. It features Class D amplification with Crown's DriveCore technology, ensuring high efficiency and lightweight design. The amplifier includes a PureBand™ Crossover System with selectable filters (low-pass, high-pass, and band-pass), Peakx™ Limiters for speaker protection, and a large LCD display for monitoring. Connectivity options encompass XLR, 1/4", and RCA inputs, along with speakON and binding post outputs. Designed for versatility, it supports stereo, bridged, and Y-mode operation. The amplifier is housed in a 2U rackmount chassis and weighs approximately 4.9 kg.
Crown NXLS2502-34-UK Two-channel, 775W @ 4? Power Amplifier
AED 4,519.21 inc VATAED 4,519.21 inc VAT Add to cartThe Crown NXTi1002-U-UK is a two-channel power amplifier delivering 500W per channel at 4Ω. Designed for professional audio applications, it offers Peakx Plus™ limiters, an enhanced subharmonic synthesizer, and HiQnet System Architect™ control software for advanced system tuning and protection. The amplifier features integrated cast-aluminum handles, user-definable fan modes, and 50 user presets for versatile performance. Its compact 2U rackmount design ensures durability and ease of integration into various setups.
Crown NXTI1002-U-UK Two-channel, 500W @ 4? Power Amplifier
AED 3,683.13 inc VATAED 3,683.13 inc VAT Add to cart- The checklist for each performance setup is a demanding one. Building amplifier racks. Configuring systems. Safety approvals. Keeping technicians working efficiently. The VRack complete amplification system from Crown now makes the job much easier for you and your team. Designed for optimum performance and setup simplicity, the VRack gives you a customized, turnkey amplification package, complete with full safety approvals.Crown-engineered components already built in and no assembly required, it’s an easy-to-configure, all-in-one amplifier solution that eliminates the time-consuming process of building amp racks. This frees up your technical team to handle other important setup tasks. The VRack delivers superb power distribution anywhere in the world and features innovative software for convenient, simplified control, giving you a versatile, worry-free rack system that’s always ready to go.
Crown VRack 3 12000HD RACK, PD, +I/O Amplifier
AED 162,392.80 inc VATAED 162,392.80 inc VAT Add to cart Designed for optimum performance and setup simplicity, the VRack gives you a customized, turnkey amplification package, complete with full safety approvals.
With Crown-engineered components already built in and no assembly required, it's an easy-to-configure, all-in-one amplifier solution that eliminates the time-consuming process of building amp racks. This frees up your technical team to handle other important setup tasks.
The VRack delivers superb power distribution anywhere in the world and features innovative software for convenient, simplified control, giving you a versatile, worry-free rack system that's always ready to go.
Crown VRACK4 | 3500HD-Enclosure W/PWR DISTRO, I/O Audio Minus Amplifier
AED 47,649.08 inc VATAED 47,649.08 inc VAT Add to cart- The Crown XLC 21300, the newest, most powerful model in Crown’s XLC Series of high-output, competitively-priced professional cinema amplifiers, delivers clean, reliable power in a versatile package. The 2-channel XLC 21300 provides 1,300 watts of rated power per channel at 4 ohms, giving it the capability to power subwoofers at both 8Ω and 4Ω loads. Front-panel indicators let you monitor signal and amplifier status at a glance.The XLC 21300 supports parallel, input Y and bridged-mono-output modes for versatile configuration. Combine the XLC 21300 with the JBL CPi2000 cinema processor and JBL Cinema Expansion Series speakers to build a complete, fully integrated JBL cinema sound solution.Compact, powerful and cost-effective, the XLC 21300 provides outstanding sound quality, ease of installation and the rock-solid reliability you expect in every Crown product.
Crown XLC 21300 2-Ch 1,300-Watt Power Amplifier For Pro Cinema Applications
AED 5,862.09 inc VATAED 5,862.09 inc VAT Add to cart Available in two models, the XLC2500 and XLC2800 incorporate Crown’s proprietary DriveCore™ Technology, which significantly reduces the amplifiers’ size, while yielding much more energy efficient operation – without sacrificing performance. Compact, powerful and cost-effective, the XLC Series provides ease of installation, outstanding sound quality and the unwavering reliability inherent in every Crown product. These amplifiers are powerful, affordable options for both the cinema and install markets. The fault signal can also be passed to TMS (Theater Management System), so the cinema manager can check the audio system working status without leaving his office. All necessary controls for daily operation of the CXM2000 are easily accessible on the front panel. This device will significantly improve the speaker audio performance and offer peace of mind in the operation of a theater system. Crown CXM2000, Crown cinema amplifiers and JBL cinema speakers constitute the Harman total solution for cinema owners who share the same goal of introducing stable and high-quality movie-watching experience with HARMAN.
Crown XLC 2500 W-O DSP Two-Channel 500W Power Amplifier
AED 2,802.98 inc VATAED 2,802.98 inc VAT Add to cartAvailable in two models, the XLC2500 and XLC2800 incorporate Crown’s proprietary DriveCore™ Technology, which significantly reduces the amplifiers’ size, while yielding much more energy efficient operation – without sacrificing performance. Compact, powerful and cost-effective, the XLC Series provides ease of installation, outstanding sound quality and the unwavering reliability inherent in every Crown product. These amplifiers are powerful, affordable options for both the cinema and install markets. The fault signal can also be passed to TMS (Theater Management System), so the cinema manager can check the audio system working status without leaving his office. All necessary controls for daily operation of the CXM2000 are easily accessible on the front panel. This device will significantly improve the speaker audio performance and offer peace of mind in the operation of a theater system. Crown CXM2000, Crown cinema amplifiers and JBL cinema speakers constitute the Harman total solution for cinema owners who share the same goal of introducing stable and high-quality movie-watching experience with HARMAN.
Crown XLC2800 2-Channels 800W Power Cinema Amplifier
AED 4,272.29 inc VATAED 4,272.29 inc VAT Add to cartThe XLI Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs. Compact, powerful and cost-effective, the XLC Series provides ease of installation, outstanding sound quality and the unwavering reliability inherent in every Crown product. These amplifiers are powerful, affordable options for both the cinema and install markets.
The fault signal can also be passed to TMS (Theater Management System), so the cinema manager can check the audio system working status without leaving his office. All necessary controls for daily operation of the CXM2000 are easily accessible on the front panel. This device will significantly improve the speaker audio performance and offer peace of mind in the operation of a theater system. Crown CXM2000, Crown cinema amplifiers and JBL cinema speakers constitute the Harman total solution for cinema owners who share the same goal of introducing stable and high-quality movie-watching experience with HARMAN.
Crown XLI 1500 2-Channels 450W Power Amplifier
AED 2,001.98 inc VATAED 2,001.98 inc VAT Add to cartThe XLi 2500 Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.The four models in the series are the XLi800, XLi1500, XLi2500 and XLi3500. They are identical except for output power. The fault signal can also be passed to TMS (Theater Management System), so the cinema manager can check the audio system working status without leaving his office. All necessary controls for daily operation of the CXM2000 are easily accessible on the front panel. This device will significantly improve the speaker audio performance and offer peace of mind in the operation of a theater system. Crown CXM2000, Crown cinema amplifiers and JBL cinema speakers constitute the Harman total solution for cinema owners who share the same goal of introducing stable and high-quality movie-watching experience with HARMAN
Crown XLi2500 2-Channels 750W Power Amplifier
AED 2,757.09 inc VATAED 2,757.09 inc VAT Add to cartThe XLi 3500 Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.The four models in the series are the XLi800, XLi1500, XLi2500 and XLi3500. They are identical except for output power. The fault signal can also be passed to TMS (Theater Management System), so the cinema manager can check the audio system working status without leaving his office. All necessary controls for daily operation of the CXM2000 are easily accessible on the front panel. This device will significantly improve the speaker audio performance and offer peace of mind in the operation of a theater system. Crown CXM2000, Crown cinema amplifiers and JBL cinema speakers constitute the Harman total solution for cinema owners who share the same goal of introducing stable and high-quality movie-watching experience with HARMAN
Crown XLi3500 2-Channels 1350W Power Amplifier
AED 5,134.13 inc VATAED 5,134.13 inc VAT Add to cartThe XLi 800 Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.The four models in the series are the XLi800, XLi1500, XLi2500 and XLi3500. They are identical except for output power. The fault signal can also be passed to TMS (Theater Management System), so the cinema manager can check the audio system working status without leaving his office. All necessary controls for daily operation of the CXM2000 are easily accessible on the front panel. This device will significantly improve the speaker audio performance and offer peace of mind in the operation of a theater system. Crown CXM2000, Crown cinema amplifiers and JBL cinema speakers constitute the Harman total solution for cinema owners who share the same goal of introducing stable and high-quality movie-watching experience with HARMAN.
Crown XLi800 2-Channels 300W Power Amplifier
AED 1,723.68 inc VATAED 1,723.68 inc VAT Add to cart- AED 2,338.38 inc VAT Add to cart
- AED 2,647.44 inc VAT Add to cart
- AED 3,915.86 inc VAT Add to cart
- AED 4,519.21 inc VAT Add to cart
- There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.
Crown XTI1002 2-Channels, 500W Power Amplifier
AED 3,683.13 inc VATAED 3,683.13 inc VAT Add to cart - There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.
Crown XTI2002 2-Channels, 800W Power Amplifier
AED 4,939.07 inc VATAED 4,939.07 inc VAT Add to cart
Showing
48
of
5897
items
No products in the cart.