Description

The SA102 extends the Synergy array series with a smaller, lighter full-range powered cabinet. It’s ideal for medium and large venues, outdoor festivals, and inclined-seating theatres.

The SA102 features a patented Paraline Lens to create a precisely shaped wavefront that matches the horn’s physical coverage pattern. It also uses Synergy Horn technology to couple the Paraline Lens with a 10-inch high-output woofer. The result is increased efficiency and directivity, without the comb-filtering often associated with arrayed horns and woofers.

The cabinet can be used vertically or horizontally, and vertical coverage is asymmetrical so users can change the directivity by simply inverting the cabinet, without the complications of steering software or physically tilting the array.

Pair with the SA115S subwoofer for the ultimate point source system.

 

FEATURES

  • 2400 W Peak Power (1200 W Program)
  • 10” LF Woofer with 3” Voice Coil
  • 4” HF Driver
  • Incorporates Tom Danley’s Patented Paraline Lens and Synergy Horn Technologies
  • 1x XLR Input, 2x XLR Outputs
  • Removable Locking powerCON® TRUE1 Input and Loop Thru Output
  • Supports Vertical, Inverted Vertical, and Horizontal Placement
  • Extremely Well-Controlled Coverage Pattern
  • Made in Canada

 

SPECIFICATIONS

System TypeFull-Range Powered Speaker
Power Rating2400 W Peak (1200 W Program)
Measured Max SPL (C-Weighted CM Max Hold)133 dB Peak, 127 dB Continuous
Frequency Response (Hz +/- 3dB)60 Hz – 18 kHz
Dispersion (H x V)30° x 45° Asymmetrical (7° Up, 38° Down)
Crossover Frequency750 Hz
Cabinet ConfigurationPatented Synergy Horn and Paraline Lens Technology
Driver Configuration10″ LF Woofer, 4” HF Compression Driver
HF Driver(s)4″ Diaphragm, Neodymium
HF ProtectionPeak and Average Limiting
LF Driver(s)10″ Neodymium Woofer with 3″ Voice Coil
LF ProtectionExcursion, RMS
HF Power Amplifier (Watts)500 W Peak (300 W Program)
HF Amplifier Type3-Tier Class H
LF Power Amplifier (Watts)1600 W Peak (900 W Program)
LF Amplifier TypeClass D
Cooling SchemeConvection
Power CableRemovable Locking powerCON® TRUE1 Input and Loop Thru Output
Power Consumption200 VA / 400 VA
Inputs1x XLR
Input Sensitivity (Vrms Sine)Line In 1.4 at Centre, 0.56 at Max
Level ControlsVolume
EQ ControlsHF Adjust, Mode Switch (Sub / No Sub)
LED IndicatorsPower, Limit, Clip
Bar Handles1 (1x Each Side)
Enclosure MaterialsMulti-ply 15 mm Birch Plywood
Standard Rigging Hardware1/4″ – 20 Thread Eyebolts (4x Top, 4x Bottom)
Stacking FeatureInterlocking UHMW Feet (Top and Bottom)
Covering / FinishPaint
Dimensions (DWH)21.3” x 17.4” x 22.8” (54 cm x 45 cm x 58 cm)
Weight69 lbs / 31.3 kg
Reviews (0)
Ratings

0.0

0 Product Ratings
5
0
4
0
3
0
2
0
1
0

Review this product

Share your thoughts with other customers

Write a review

Reviews

There are no reviews yet.