XPS 16KD is a four-channel power amplifier with advanced processing and advanced routing with Dante, digital and analog I/O for both touring and install use. With 4×4000 W Class D continuous power at 2.7 ohms, 40-bit floating-point processing at 96 kHz, and 32-bit internal routing, XPS 16K packs extreme power density in a 2U chassis. Designed for both touring and installed sound systems, XPS is intended for use with high-performance speakers and provides ready-to-use configurations and presets. It can also be used in linear mode with advanced tuning capabilities. Each output features: 4000 ms output delay (1372 m / 4501 ft), EQ Filters, Crossovers, FIR Filters, Multiband Compressor, RMS Limiter, and Thermal limiter. XPS delivers rider-friendly premium sound with full RDNet remote management, large touch interface onboard, exceptional signal/noise ratio, ultra-low distortion, and extreme dynamic range.
FEATURES
- 16000 W Total Continuous Power
- 40-bit Floating-point DSP and 32-bit routing up to 96 kHz
- Dante Audio Network
- FiRPHASE, Bass Motion Control, Bass Shaper
- RDNet Networked Management
- Touch 4.3″ Color TFT Interface
- Full On-board Processing with Delay, EQ, Comp/Limiter
- On-board Speaker Presets Library
- Class-D Modules with SMPS and Advanced PFC
SPECIFICATIONS
Total Continuous Power Output:
- 4 × 4000 W at 2.7 ohms
- 4 × 2600 W at 4 ohms
- 4 × 1400 W at 8 ohms
Amplifier Class: Class D
Signal Processing:
- 40-bit floating-point DSP
- 32-bit internal routing up to 96 kHz
Connectivity:
Analog Inputs: 4 × XLR
Digital Inputs: 12 × (AES/EBU, Dante) via Ethercon and XLR
Outputs:
- 4 × Speakon
- 3 × General Purpose Outputs (GPO)
General Purpose Inputs (GPI): 2
Processing Features:
- FiRPHASE technology
- Bass Motion Control (BMC)
- Bass Shaper
- Air Compensation
- Mid-Low Correction
- Dynamic PEQ
- Multiband Compressor
- RMS and Thermal Limiters
- Driver Excursion Control
- User Interface:
- 4.3″ TFT capacitive color touchscreen
- Rotary encoder for navigation
Network Management:
- RDNet onboard for remote control and monitoring
- Dante audio networking support
- Cooling:
- Forced-air cooling with variable-speed fans
- Noise levels: Idle <35 dBA, Max load <64 dBA
- Physical Dimensions:
- Height: 88.7 mm (3.49″)
- Width: 482 mm (18.98″)
- Depth: 482.4 mm (18.99″)
- Weight: 15 kg (33.07 lbs)
Power Supply:
- Voltage: 90–240 V~ (50/60 Hz)
- Nominal Current: 30 A at 100–120 V, 16 A at 220–240 V
- Maximum Power Consumption: 5800 W
- Standby Power Consumption: 20 W
Safety and Compliance:
- CE compliant
- UL 62368-1, 3rd Edition
- CSA C22.2 No. 62368-1:19, 3rd Edition
No products in the cart.
Reviews
There are no reviews yet.