Paired with your existing XLR-equipped preamp, the Tascam TM-200SG short shotgun microphone offers pro-type features and design for indie filmmakers, vloggers, and videographers on a limited budget. The included mic holder has a shoe mount and a 1/4″ thread, allowing the versatility of placing the mic atop your camera or tripod stand. The compact and lightweight housing of the TM-200SG makes it an unobtrusive companion for your shooting rig.
The supercardioid condenser element of the microphone enables it to deliver focused sound pickup with far less background noise than the omnidirectional microphones usually built into cameras. Its 30 Hz to 20 kHz frequency response incorporates a gentle presence boost at around 7 kHz to enhance intelligibility. Plus, the inclusion of a switchable low-cut filter lets you easily control problematic bass buildup such as traffic rumble. The TM-200SG utilizes a balanced XLR 3-pin output connector and runs on standard 48 VDC phantom power.
Features
- For Indie Films, TV & Documentaries
- Supercardioid Condenser Element
- Phantom Powered
- Switchable Low-Cut Filter
- XLR 3-Pin Output Connector
- Gentle Presence Boost at 7 kHz
- Windscreen Reduces Wind Noise
- Compact and Lightweight Housing
- Includes Shoe/Tripod Mic Holder
Specifications
| Form Factor | Stand/Boom Mount |
| Sound Field | Mono |
| Operating Principle | Pressure Gradient |
| Capsule | Electret Condenser |
| Polar Pattern | Supercardioid |
| Orientation | End Address |
| Circuitry | Solid-State |
| Pad | None |
| High-Pass Filter | 160 Hz, 3 dB/Octave |
| Tone Adjustment | None |
| Gain Adjustment | None |
| Indicators | None |
| On-Board Controls | High-Pass Filter |
| Windscreen | Foam (Included) |
| Frequency Range | 30 Hz to 20 kHz |
| Maximum SPL | 132 dB SPL (1 kHz, 1% THD) |
| Impedance | 200 Ohms ± 30% at 1 kHz |
| Sensitivity | -40 dBV/Pa at 1 kHz |
| Signal-to-Noise Ratio | 74 dB (1 kHz) |
| Output Connectors (Analog) | 1 x XLR 3-Pin Male (on Mic) |
| Headphone Connector | None |
| Operating Voltage | 48 V (Phantom Power) |
| Mounting | Camera/Shoe-Mount (with Included Hardware) |
| Mounting Thread Size | 1/4″-20 Female |
| Included Case | Soft Case |
| Included Filters | None |
| Dimensions | ø: 0.9 x L: 6″ / ø: 23 x L: 153 mm |
| Weight | 1.9 oz / 53 g |
| Package Weight | 0.39 lb |
| Box Dimensions (LxWxH) | 8 x 4 x 2″ |
No products in the cart. 
Reviews
There are no reviews yet.