The OCV 6-WH is a 240-Watt high sensitivity pendant loudspeaker that delivers wide and consistent broadband directivity with enhanced intelligibility – plus the linear response of our legendary studio monitors. Engineered specifically for aesthetically sensitive applications where consistent high quality audio coverage is required, the OCV 6-WH is ideally suited for airport and ground transportation terminals, shopping malls, and large double or triple height commercial floors – without compromising clarity, intelligibility or Sound Pressure Level (SPL). OCV 6-WH loudspeakers provide a seamless sound signature within a multi-zoned environment that benefits from additional Tannoy installation loudspeakers.
Features
- Coaxial full range pendant loudspeaker for installation applications
- 60 Watts continuous, 240 Watts peak power
- 6″ mineral loaded polypropylene driver with nitrile rubber surround for enhanced durability and long-term reliability
- 0.75″ ferrofluid cooled soft dome neodymium high frequency driver
- Wide constant directivity dispersion for optimum coverage
- UL 1480 certified for general signalling systems
- UV and weather resistant UL 94 V-0 ABS front with plated steel fire can enclosure
- Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input
- Low insertion loss 60 W line transformer with easily accessible tapping switch
- Optimised for Lab Gruppen low impedance LUCIA amplifiers with up to 8 OCV series loudspeakers per channel
- All components weather resistant to IP64 for outdoor use
- Semi matt white finish fits unobtrusively in any environment
- Powder coated perforated steel mesh grille with dust protection
- Quick and easy hanging system included for reduced installation time and cost
- Weatherproof cable gland cover to protect Phoenix* connectors and tap selector switch
Specifications
| PERFORMANCE | |
| Frequency Response (-3dB) (1) | 80 Hz – 20 kHz |
| Frequency Range (-10dB) (1) | 60 Hz – 30 kHz |
| System Sensitivity (1W @ 1m) (2) | 88 dB |
| Dispersion (degrees conical) | 90 |
| Transducers | Coaxial Low Frequency: 150mm (6.00″) mineral loaded cone material High Frequency: 20mm (0.79″) |
| Crossover | 5.4kHz – 2nd order LF, 2nd order HF |
| Directivity Factor (Q) | 11.3 averaged 1kHz to 6.3kHz |
| Directivity Index (DI) | 10.5 averaged 1kHz to 6.3kHz |
| Rated Maximum SPL (2) | Average: 105dB Peak: 111dB |
| Power Handling | Average: 60W Programme: 120W Peak: 240W |
| Recommended Amplifier Power | 120W @ 16 Ohms |
| Nominal Impedance | 16 Ohms |
| Distortion 10% Full Power (9.8V) 250Hz 1kHz 10kHz | 2nd Harmonic 3rd Harmonic 0.42% 0.14% 0.11% 0.31% 1.27% 0.16% |
| Distortion 1% Full Power (3.1V) 250Hz 1kHz 10kHz | 2nd Harmonic 3rd Harmonic 0.16% 0.16% 0.05% 0.18% 0.27% 0.27% |
| CONSTRUCTION | |
| Enclosure | ABS / Steel |
| Grille | Steel, plated and powder coat painted |
| Connectors | Euroblock type removable locking connector with screw terminals with “loop through” facility |
| Transformer setting | Rotary switch |
| Safety Agency Ratings | UL-1480, CE |
| Dimensions Bezel diameter Overall length | 260mm (10.23″) 423mm (16.66″) |
| Net Weight | 5.9kg (12.96lbs) |
| Shipped Weight | 7.5kg (16.53lbs) |
| TRANSFORMER VERSIONspecifications as above except: | |
| Transformer Taps (rear rotary switch) | 70V: 60W / 30W / 15W / 7.5W / OFF & Low Impedance operation 100V: 60W / 30W / 15W / OFF & Low Impedance operation |
No products in the cart.
Reviews
There are no reviews yet.