Get a professional podcast sound with audio interfaces, hard disk recorders, or direct to computers and mobile devices with the Shure MV7 Podcast Mic, styled here in silver. This is a high-quality, broadcast-style dynamic microphone, one that has both a conventional XLR connection and a USB port.
The Shure MV7 fulfills the needs of anyone who demands a broadcast-quality sound from their podcast microphone, no matter the setup: whether you work with an audio interface, or prefer to record directly into your computer over USB, this microphone will do the job. The mic offers a clear and present sound, extensive controls, rugged accessories, and seamless integration with the free ShurePlus MOTIV Desktop App for convenient effects right out of the gate.
Â
Features
Legendary Broadcast Sound
The mic takes its design and sonic cues from the Shure SM7B, a classic used on countless podcasts and radio broadcasts. Use the mic in close proximity to your voice and you’ll find it exhibits a clear, intelligible, and high-quality sound. Optimized frequency response for rich and natural vocal reproduction
Works with Your Analog or Digital Setup
Thanks to its multiple outputs, you can use this mic with nearly any podcasting setup. The mic works with your audio interface, field recorder, mixer, or computer (over USB Mini-B) as well as select Android devices, and select iOS devices. The device is also MFi-certified.
Rugged Appointments for Sound and Use
Like the SM7B, the MV7 has a built-in pop filter to protect against plosives and p-pops, greatly simplifying your editing process. With its built-in ready-to-mount yoke, the mic offers a build quality that is rugged, with an all-metal construction for reliability in mission-critical circumstances.
Unidirectional Polar Pattern for the Untreated Room
The mic features a unidirectional cardioid polar pattern, which is the best natural defense against room noise: since the capsule mostly captures what’s directly in front of it, you won’t pick up as much room noise as you would with another polar pattern. Depending on your particular room, you may still need a little room treatment, or some noise-reduction software, to address issues such as your computer’s hum or your air conditioner—but the chances of that are markedly lower with a cardioid polar pattern.
Integrated Controls & High-Quality USB Audio
On the USB side, the mic provides broadcast-quality specs and intuitive functionality. Capture audio at sample rates and resolutions up to 48 kHz / 24-bit, which is the standard for editing and mixing broadcast audio. Use the integrated touch-panel interface on the mic itself to control levels, headphone volumes, monitor mix, and mic-mute.
Built-In 3.5mm Headphone Monitoring with Mix Control
The mic offers a headphone jack for monitoring. Just plug a pair of headphones into the MV7’s 3.5mm jack, and you’ll be able to listen to your high-quality audio in all its glory. In addition to its touch-panel control surface, the mic gives you a blend knob, which comes in handy for recording music: you can use it to adjust the balance between your mic’s pickup and any pre-recorded audio.
USB Connection Right Out of the Box
Two cables are included, one a USB Mini Type-B to USB Type-A, the other a USB Mini Type-B to USB Type-C.
Included Software to Make Recording Easier
The free ShurePlus MOTIV Desktop Application will let you save your own presets, enable auto-level, compression, limiting, and EQ the signal, and more. DSP modes allow you to tweak the sound on the way in.
Â
Â
Â
Specifications
Microphone
| Primary Applications | Podcast, Audio for Video |
| Form Factor | Desktop |
| Intended Sound Sources | Vocals |
| Sound Field | Mono |
| Capsule | 1 x Dynamic |
| Polar Pattern | Unidirectional |
| Orientation | End Address |
| Circuitry | Solid-State |
| High-Pass Filter | None |
| Gain Adjustment | 0 to +36 dB |
| On-Board Controls | Gain/Sensitivity, Headphone Volume, Mic Mute |
| Windscreen | Built-In |
Performance
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | Unidirectional:Â 132 dB SPL |
| Impedance | Unidirectional:Â 314 Ohms at 1 kHz |
| Sensitivity | Unidirectional:Â -55 dBV at 1 kHz Unidirectional:Â -47 dBFS/Pa at 1 kHz |
Connectivity
| Output Connectors (Analog) | 1 x XLR 3-Pin Male (on Mic) |
| Output Connectors (Digital) | 1 x Micro-USB Female (on Mic) |
| Headphone Connector | 1 x 1/8″ / 3.5 mm |
| Cable Length | 10′ / 3.0 m (Straight) |
Digital Audio
| A/D Conversion | 16 / 24-Bit |
| Sample Rate | Up to 44.1 / 48 kHz |
| OS Compatibility | Android Windows iOS macOS *As of September, 2020: Check with manufacturer for the most up-to-date compatibility |
| RAM Requirement | 2 GB Minimum |
Power
| Bus Power | USB / Lightning |
Physical
| Color | Silver |
| Mounting | Mounting Thread (via Integrated Hardware) |
| Mounting Thread Size | 5/8″-27 Female |
| Construction Material | Metal |
| Dimensions | ø: 2.6 x L: 2.1″ / ø: 66.5 x L: 53.6 mm (Microphone) H: 6.5 x W: 3.6 x L: 6″ / H: 164 x W: 90.2 x L: 153.6 mm (Microphone, with Mount) |
| Weight | 1.21Â lb / 0.55Â kg |
Packaging Info
| Package Weight | 2.435 lb |
| Box Dimensions (LxWxH) | 12.4 x 6.1 x 4.3″ |
Â
Â
No products in the cart.
Reviews
There are no reviews yet.