Designed with an emphasis on sound quality over bells and whistles, the Sennheiser MK 4 is a large-diaphragm true condenser microphone offering warm and detailed audio capture that complements a range of sources from vocals and speech to acoustic instruments, drum overheads, guitar amps, and more. Since it incorporates an internally shock-mounted capsule and a rugged metal housing, the MK 4 is not only an obvious choice for the studio, but also a dependable companion on stage.
The MK 4 features a large 1″ diaphragm plated in 24kt gold to enhance conductivity, resist corrosion, and yield a tone based on the e 965 vocal mic. The cardioid polar pattern strongly rejects sound behind the mic while picking up side-entry sound without coloration. The mic’s low-noise circuitry further solidifies it as a studio mic capable of meeting the demands of digital recording systems. Use an XLR mic cable (available separately) to connect the MK 4 to any mic preamp that can supply 48V phantom power.
Features
Versatility Is King
True Condenser Capsule
Cardioid Polar Pattern
Sturdily Built
Additional Features
- True condenser design with 1″ large-diaphragm capsule
- 24kt gold-plated diaphragm
- Rugged metal housing
- Internally shock-mounted capsule minimizes structure-borne noise
- Designed for project studios and stage use
- Low inherent self-noise (10 dBA) and high maximum SPL (140 dB)
- Balanced XLR 3-pin output connector
- Requires 48V phantom power
- Includes compact stand mount and drawstring pouch
Specifications
Primary Applications | Studio Recording |
Form Factor | Large Diaphragm Mic / Stand/Boom Mount |
Intended Sound Sources | Vocals, Speech/Voice Over, Overhead, Instrument |
Sound Field | Mono |
Operating Principle | Pressure Gradient |
Capsule | Condenser |
Diaphragm | 1″ / 25.40 mm |
Polar Pattern | Cardioid |
Orientation | Side Address |
Circuitry | Solid-State |
Pad | None |
High-Pass Filter | None |
Tone Adjustment | None |
Gain Adjustment | None |
Indicators | None |
On-Board Controls | None |
Windscreen | None |
Frequency Range | 20 Hz to 20 kHz |
Maximum SPL | 140 dB SPL |
Off-Axis Rejection | 2 dB at 60° 12 dB at 120° 20 dB at 180° |
Impedance | 50 Ohms |
Load Impedance | 1000 Ohms |
Sensitivity | 25 mV/Pa |
Dynamic Range | 130 dB |
Equivalent Noise Level | 10 dB A-Weighted 20 dB CCIR |
Output Connectors (Analog) | 1 x XLR 3-Pin Male (on Mic) |
Headphone Connector | None |
Bus Power | None |
Operating Voltage | 48 V (Phantom Power) |
Operating Current Consumption | 3.1 mA |
Color | Silver |
Mounting | Mic Clip/Stand Adapter (Included) |
Included Case | Pouch |
Included Filters | None |
Construction Material | Die-Cast Zinc |
Operating Temperature | 32 to 72°F / 0 to 40°C |
Storage Temperature | -4 to 158°F / -20 to 70°C |
Dimensions | ø: 2.2 x L: 6.3″ / ø: 5.7 x L: 16 cm |
Weight | 1.07 lb / 485 g |
Package Weight | 1.72 lb |
Box Dimensions (LxWxH) | 10.35 x 4.7 x 3.3″ |
Reviews
There are no reviews yet.