PRO FADER (550 mm) features a high precision 100 mm travel track with a 10 kΩ linear law, ideally suited to servo control applications. The integrated touch sensing track and conductive T-Bar allow both the implementation of automatic channel selection in software, as well as detection of when the fader is being held so that the motor is not driven. PRO FADER (550 mm) is designed to be mounted to console fascia panels via its two M3 threaded pillars which are on 120 mm mounting centres. A 550 mm long cable is provided which includes connections for the 10 kΩ resistive track, the touch sensing track and the motor.
Features
- Touch-sensitive Motorised 100 mm Fader with 550 mm cable for Midas digital consoles
- High-endurance up to 1 million cycle lifetime
- Premium quality wiper fingers made from Palladium Silver-Copper alloy
- Touch-sensitive T-bar and sensor track
- High-precision 10 kΩ linear resistive track
- Long-life, industry-proven Mabuchi* motor
- Replacement for Penny+ Giles* PGFM3200, Alps* K-Fader, etc.
System
| Fader travel | 100 mm |
| Track resistance | 10 kO ± 20% |
| Track law | Linear |
| Track linearity | ± 2% |
| Mounting thread | M3 |
| Mounting centres | 120 mm |
| Motor | Mabuchi FF-050SB-09250 |
| Motor drive voltage | 8 V nominal |
| Connector | 6 way 2.54 mm (0.1″) latching connector (Molex* 22-01-2065 connector shell with 08-50-0031 crimps) |
| Cable length | 550 mm |
| Connections | 1 – Grey – Touch Sense 2 – Yellow – Wiper 3 – Blue – 0% Travel 4 – Red – 100% Travel 5 – Red – Motor (+) 6 – Black – Motor (-) |
| Dimensions | 150 mm length x 13 mm width x 47 mm high |
No products in the cart.
Reviews
There are no reviews yet.