Lake LM 44 Audio System Processor for Loudspeaker Management and System Control in High-Performance Applications

Name: Lake LM 44 Audio System Processor for Loudspeaker Management and System Control in High-Performance Applications
Brand: Lake
SKU: LM 44
Price: 18857.00 AED
Availability: InStock

Brand :

Sku: LM 44

AED 18,857.00 Exc VAT

Available in stock

Features

The LM 44 provides a four input/four output analog configuration that is suited for a variety of system signal processing and routing applications. The LM 44 also provides 8 × 8 AES3 digital I/O and 4 × 8 Dante networked I/O, all with comprehensive signal routing to provide Dante break-in / break-out and failover functionality. Two LM 44 units may be stacked and linked to function as an 8 × 8 processor.

EAN: 7331573002034

Compare Wishlist

Category: Digital Signal Processors (DSPs)

Description

LM 44 provides the ultimate combination of input/output signal flexibility and fail-safe operation. Audio inputs are accepted via the Dante network as well as on connectors for AES3 digital and analog.
Simple programming in LAKE Controller allows multiple, user-configured automatic switching scenarios. For example, signals may be distributed over the Dante network, with an AES3 input source failing over to analog – and with the result automatically cascading to all Dante receivers. In addition, the LM Series’ dual-redundant network topology enables seamless switching in case of a problem on one Ethernet link.

Features

High-performance Lake digital audio system processor for unparalleled loudspeaker management and system control
Raised Cosine Equalization plus linear phase and classic crossovers for ultimate sound-shaping abilities
Configurable Lake groups offers simultaneous non-destructive parameter adjustments across all Lake platforms
Redundant audio inputs and on-board system surveillance for full system security
Full system control via Lake Controller touch-screen-optimized software application
LimiterMax Peak and RMS limiters offer seamless power output control
4 x Lake Mesa modules or 2 x Lake Contour modules for optimized system or loudspeaker control
4 x analog inputs and 4 x analog outputs with Iso-Float ground isolation provided through Neutrik XLR* connectors
4 x AES3 digital audio inputs and 4 x AES3 digital audio outputs with up to 192 kHz sampling frequency provided through Neutrik XLR connectors
2 x Neutrik etherCON* RJ-45 ports provide dual-redundant Dante interfaces and remote configuration via Lake Controller and Dante Controller software
High quality A/D and D/A 24-bit conversion and 96 kHz internal sampling frequency
Front panel accessible Dedicated Module Input and Output Mute buttons and LED metering
Rugged 1U rackmount chassis for space saving durability in touring applications
100 user presets for simple and efficient system configuration and set-up
Backlit, white-on-black front panel daylight readable display
Dynamic buttons and rotary encoder for front panel parameter adjustment
Software configurable GPIO for 3rd party system control
Universal 70 – 265 V power supply served through a locking IEC mains connector

Specifications

Features

Module configuration	2 Contour or 4 Mesa modules
Channel processing	6 in Contour mode, 4 in Mesa mode
Input routers	8 input routers with 4 priorities in each, seamless failover to lower priorities
Module input mixer	4 ch. for Contour, 8 ch. for Mesa-modules. Mix any ratio between all input routers.
Input processing	Parameteric EQ with Mesa and Ideal Graphic equalizers, both utilizing Raised Cosine algorithms
Output processing	Linear phase or Classic crossovers, Parametric EQ, shelving and all-pass filters
Features	Delay, Mute, Phase, Gain etc.
Limiters	LimiterMax with Peak and RMS limiter. Confi gurable MaxRMSLevel, MaxRMSCorner, MaxRMSAttack, MaxRMSRelease and MaxPeakLevel
SuperModule compatible	Yes

Audio Performance

Conversion resolution	24-bit
Internal Sample Rate / Data path	96 kHz / 32 bit floating point
Product propagation delay	Best case (AES synchronous 96 kHz to AES synchronous 96 kHz via module) 0.871 ms Analog (Analog in to Analog out via module) 1.049 ms Pass thru (Analog in to AES synchronous 96 kHz bypassing module) 0.158 ms
Maximum available user delay	2 seconds

Analog

Inputs and Outputs	4 inputs, 4 outputs
Frequency response, analog-to-digital	+/-0.1 dB, 20 Hz to 20 kHz
Frequency response, digital-to-analog	+/-0.03 dB, 20 Hz to 20 kHz
THD+Noise, inputs	0.00024% typical at 1 kHz
THD+Noise, Outputs	0.00037% typical at 1 kHz
Dynamic range, inputs	116 dB
Dynamic range, Outputs	115 dB
Input impedance	20 kOhm balanced, 10 kOhm unbalanced
Output impedance	50 ohms
Maximum input level	+26 dBu
Input sensitivity – settings for digital full-scale	+12 dBu, +26 dBu
Maximum output level	21 dBu
Crosstalk, inputs	-98 dB, 20 Hz to 20 kHz
Crosstalk, outputs	-98 dB, 20 Hz to 20 kHz
Common mode rejection ratio (CMRR)	>70 dB, 20 Hz to 20 kHz

Dante Audio Network

Inputs and Outputs	4 inputs, 8 outputs
Supported sample rates	48, 96 kHz
Support redundant paths	Glitch-free Dual Redundant Dante using two Ethernet networks
Receiver latency	0.5 ms, 0.8 ms, 1.3 ms, 4 ms

Device presets

Frame presets

100

AES3/EBU (sample rate converters available as desired)

Inputs and Outputs	8 inputs, 8 outputs
Supported sample rates	44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz (I/O individually selectable)
Supported resolutions	Up to 24-bit
THD + Noise	0.00002 % at 96 kHz and 0.00006 % at 44.1 kHz sample rate
Dynamic range	Base48 -140 dBFS, Base44 -125 dBFS

Clocking

Clock selection	Manual or automatic according to priority scheme
Oscillator type / synchronization	High quality VCXO clock can provide Dante master clock or slave. Automatic synchronization with Dante network.
Base48	2 (Primary and SRC)
Base44	1 (SRC)
Clock accuracy	< ± 7 ppm

GPIO

Inputs	2 General Purpose Inputs (GPI) supporting external contact closure
Outputs	2 General Purpose Outputs (GPO) with internal contact closure
Software configurable input control	Standby state, Mute state, Dual preset recall
Software configurable output indication	Standby state, Mute state, Faults, Ready

Back panel Interface

Analog Inputs and Outputs	4 + 4 XLR
AES Inputs and Outputs	DB-25, with selectable termination
Ethernet Ports	Auto 100/1000, Auto uplink, 2 x Neutrik etherCON RJ45 connectors
GPIO	DB-9
Power	Detachable locking 3-pin IEC
Control and monitoring interface	Via Ethernet for Lake Controller software, or DLM (the 3rd party protocol)

Front-panel user interface

Display	Daylight readable monochrome (128 x 64)
Meters	LED for signal level and clip indicators per channel
Mute access	Dedicated Mute button and LED indication per processing channel
Menu	Intuitive and powerful user interface with soft keys
System status indication	LED Fault and Warning indication and detailed description on display
Parameter adjustment	Single/multiple parameter edits with rotary encoder