The PD3000 is a two-channel amplifier delivering 2 X 1500W of power for entry/mid-level live sound applications. PD Series amplifiers employ our unique IDEEA Class-D output stage that is ideally matched to the rated power output. To provide flexibility, each channel offers sufficient voltage swing and current capacity to drive loads in any impedance without any additional configuration. In order to have low thermal losses as well as a high voltage swing, the design is based on a permanently bridged output.
Features
- Two channel amplifier delivering 2 x 1,500 Watts
- Precise power management guarantees performance and efficiency
- Proven and reliable Class-D amplifier stage
- Highly efficient Switch Mode Power Supply (SMPS)
- Speaker Protect Limiter for maximum level output and reliable driver protection
- Accurate 8-segment Signal and Limit LEDs for performance monitoring
- Integrated crossover with low-cut, high-cut and full range mode
- Comprehensive circuit protection against short circuits, DC and thermal overload
- Balanced XLR and TRS input connectors with optimised sensitivities
- Professional speakON* output connectors
- Efficient cooling with temperature-controlled fan
- Rugged and lightweight rack mount chassis for maximum durability
Specifications
General
| Number of amplifier channels | 2 |
| Peak total output all channels driven | 3000 W |
| Peak output voltage per channel | 115 V |
| Peak output current per channel | 32 A |
| Bridge mode | No |
| Output circuit type | Class-D |
Amplifier Outputs
| Max Output Power | |
| All channels driven | |
| 2 Ω per channel, stereo | 1000 W |
| 4 Ω per channel, stereo | 1500 W |
| 8 Ω per channel, stereo | 800 W |
Audio Performance
| THD+N 20 Hz – 20 kHz @ 1 W | < 0.1% |
| THD+N @ 1kHz, 1 dB below clip | < 0.1% |
| Signal-to-noise | >90 dB |
| Channel separation (Crosstalk) @ 1 kHz | >75 dB |
| Frequency response | 10 Hz to 20 kHz, +0.5/ -1 dB |
| Input impedance | 10 kΩ unbalanced, 20 kΩ balanced |
| Distortion,1/8 rated power | < 0.1% |
System
| Controls | |
| Front | Power switch Gain controls (channels A and B) |
| Rear | Stereo / mono, switchable Xover: LF / full range / HF, switchable |
| Crossover frequency | 100 Hz |
| Indicators | |
| Power | RDY LEDs lit green |
| Limit, per channel | LIM LEDs lit red |
| Signal, per channel | -30 dB, -24 dB, -18 dB, -12 dB, -9 dB, -6 dB, -3 dB, LEDs lit green/orange |
| Thermal Warning, per channel | RDY LED blink orange |
| Thermal Warning 90%, PSU | Both RDY LEDs blink orange |
| Thermal fault, per channel | RDY LED blink red |
| Thermal fault 100%, PSU | Both RDY LEDs blink red |
| Fault, channel | RDY LED lit constantly red |
| Fault, device | Both RDY LEDs constantly lit red |
| Connectors | |
| Inputs / link | 2 x XLR 2 x 1/4″ TRS |
| Outputs | Neutrik speakON (2 x NLT4) |
| Mains connector | Locking IEC appliance inlet, C14 |
| Protection Features | |
| Cooling | Two fans front-to-rear air flow, temperature controller speed |
| Amplifier protection | Thermal and DC protection, Rail sensing and peak current limiting. |
| Load protection | Controlled start and shutdown, behavior, DC-fault protection, Short-circuit protection |
Power Supply
| Voltage | Separate 230 V and 115 V versions available. Not selectable on the product. |
| USA / Canada / Japan | 100-120 V, 50/60 Hz |
| UK / Australia / Europé / Korea / China | 220-240 V, 50/60 Hz |
| Power consumption @ 4 ohms | 1050 W |
Dimensions / Weight
| Dimensions (H x W x D) | 93 x 483 x 326 mm (3.7 x 19 x 12.8″) |
| Weight | 6.5 kg (14.3 lbs |
| Finish | Black painted aluminium chassis and grey front |
| Approvals | CE, cTUVus, PSE, RCM, CCC, FCC |
No products in the cart.
Reviews
There are no reviews yet.