Description

The JBL CSM-32 3 x 2 Stereo Public Address Mixer is a digital commercial mixer for conferencing, retail, and hospitality applications. The mixer features three stereo music inputs with bass and treble equalizers and one line input for connecting the mixer to a building’s alarm system. The mixer also features one microphone input with phantom power, gain, and a ducker that can lower the volume of the music when making announcements.

The unit features two stereo outputs with zone equalizers, active crossovers, and separate subwoofer outs. An additional music-only mono output is provided for telephone music-on-hold systems. Designed with a simple analog style control panel, a knob switches between audio from source 1, audio from source 2, and remote control of the mixer. The unit does not require a computer to operate. An included security plate can be installed over the front panel to prevent changes to the unit’s controls once configured.

The mixer works with CSR remote controllers, allowing you to use a remote to select the source and adjust the volume of each zone. Additional output zones may be added to the system by connecting multiple CSM mixers together using a Cat5 cable plugged into the unit’s RJ45 link ports. With the above features, the mixer provides flexible options for different commercial sound applications.

 

Features

LevelGuard

LevelGuard optimizes the compression of incoming source signals to keep the overall output signal under control. The threshold of the LevelGuard is adjustable by turning the threshold pot on the front of the mixer

AutoWarmth

The AutoWarmth automatically optimizes the tonal balance and musical character of incoming source signals. The threshold of the AutoWarmth is adjustable by turning the threshold pot on the back of the mixer

Mic Minimum

The mic minimum trim pot sets the minimum output volume level for the microphone. The main mic volume control knob will not go below this level, ensuring the microphone will be heard during announcements

Source 1 Priority and Priority Hold

The Source 1 Priority on/off button determines whether Source 1 will override sources 2 and 3. The priority hold pot adjusts the time it takes for the other input sources to take effect after the priority source is finished playing

Limiter

A built in limiter prevents the signal from clipping

Mono and Stereo Operation

A push button switches the output of the mixer between mono and stereo

Music Volume Ducking for Microphone Announcements

The mixer allows you to adjust the ducking depth sensitivity of the music volume while using the microphone input to make announcements. The ducking depth sensitivity can be set between cutting the music out completely to no ducking at all during announcements

Remote Controls

The mixer can be controlled by the optional JBL CSM remote controls CSM-V, CSR-2SV, and CSR-3SV which connect to the mixer’s RJ-45 remote port
 

Specifications

Line Inputs 
Type3 x stereo, unbalanced RCA connectors
Nominal Sensitivity-10 dBV
Input Impedance20 kΩ
Maximum Input+12 dBu
EqualizationBass ±10 dB @ 80 Hz
Treble ±10 dB @ 8 kHz, 6 dB/octave shelf
Mic 
Type1 x balanced, 0.2″ (5.08 mm) Euroblock connector
Input Impedance2 kΩ
NoiseEIN <117 dB, 150 Ω, DSP band-limited 120 to 8,0000 Hz, BW24
Maximum Input+20 dBu
EqualizationBass ±6 dB @ 250 Hz, Treble ±6 dB @ 2 kHz, 6 dB/octave shelf
CMRR>40 dB, typically >55 dB @ 1 kHz
Preamp Overall Gain+30 dB to +60 dB adjustable
Phantom Power+48 VDC , 10 mA
Output 
Type2 x stereo (Left, Right, Sub) balanced 1/8″ (3.5 mm), Euroblock connector
Output Impedance120 Ω balanced
Maximum Output Level+20 dBu
Crossover FrequenciesLeft and Right in: 125 Hz high-pass (BW24)
Sub in: 125 Hz low-pass (BW24)
Left and Right out: 20 to 20,000 Hz
Sub out : 20 to 20,000 Hz (mono summed)
LED INDICATORSSource inputs:
Signal present LED (turns on at -20 dBu)
Signal clip LED (turns on at +10 dBu)

Mic input:
Signal present LED (turns on at -20 dBu)
Signal clip LED (turns on at +18 dBu)

System Performance 
Frequency Response20 to 20,000 Hz, ±0.1 dB
Dynamic Range104 dB, A-weighted, 20 to 20,000 Hz
ConverterMic input implements dbx Type IV conversion system
Sample Rate48 kHz
Crosstalk>75 dB
THD & Noise0.005% typical at +4 dBu, 20 to 20,000 Hz, 0 db gain
Rear Panel Connections 
Direct Inputs1 x Balanced, 1/4″ (5.08 mm) Euroblock connector
Input impedance: 10 kΩ
Maximum input: +20 dBu
Frequency response: 20 to 20,000 Hz
Mute1 x 2-pin 1/4″ (5.08 mm) Euroblock connector
Connecting the pins mutes all source inputs, does not mute mic input.
Paging1 x 2-pin 1/4″ (5.08 mm) Euroblock connector
Connecting zone pins to ground assigns page to that respective zone
LinkSource: 1 x RJ45 port requires CAT3 cable or higher with maximum length 7.9′ (2.4 m)
Main: 1 x RJ45 port requires CAT3 cable or higher with maximum length 7.9′ (2.4 m)
USB1 x USB Type B port for firmware updates
General 
Power Consumption10 W
Power Requirements100 to 240 V thermal fuse in external transformer
Rack MountableYes with included brackets
Dimensions19.0 x 1.8 x 7.0″ (48.3 x 4.6 x 17.8 cm)
Weight5.3 lb (2.4 kg)
Packaging Info
Package Weight7.4 lb
Box Dimensions (LxWxH)22 x 11 x 2.5″

 

 

Additional information
Brand

JBL Professional

Reviews (0)
Ratings

0.0

0 Product Ratings
5
0
4
0
3
0
2
0
1
0

Review this product

Share your thoughts with other customers

Write a review

Reviews

There are no reviews yet.