Amplifiers

The passionate acoustic player who needs an amp that is versatile, compact and powerful, whilst being sympathetic, detailed and delicate, just like an acoustic guitar. Your Guitar, your amp, your tone. The A1 delivers an amplified acoustic performance to match the tone and dynamics of the top-quality acoustic instruments on the market today.

The CUB12R houses a 12" driver, giving it an increased volume and full rich valve tone. Looking at the preamp it's clear that the CUB12R packs more into the amp than it's smaller siblings. It features Gain, Treble, Middle, Bass, Volume, Tone and Reverb controls. The output section of the CUB12R is based around a pair of EL84 tubes giving it a more scooped tone than it's smaller counterparts. Think smooth rich overdrive with bags of gain.

The CUB12R features two input sockets one-labeled 15W the other labeled less than one watt. Plug into the "less than one watt" and you get your great tube tone at a whisper. The less-than-one-watt option allows you to drive the power amp section really hard allowing you to really access the "dark art" tone of power amp distortion.

The CUB12R is a member of the CUB range which offers everyone the opportunity to experience the sound and feel of a good quality tube amp at what is an amazing price.

2 x EL84 power tubes combine with 3 x ECC83/12AX7 pre-amp tubes to deliver 15W RMS power with natural drive and warmth. Opt for either the full 15 watts RMS power or <1W power. <1W is ideal for recording and practice without sacrificing tone; 15W allows for stage-ready volume levels. HH custom-designed 12” drivers with open-back cabinet speakers for dynamic, responsive interaction with tube amplifier; integrated tilt stand under the cabinet enhances projection and tonal variation. Independent Gain and Volume control allows preamp drive to be balanced with the output level, progressing from warm cleans to rich overdrives. 3-band tone stack with Bass, Middle and Treble controls; ‘Tone’ control the overall top-end response, reduce upper-end harmonics on the output and pre-amplifier overdrive.

The GH30R-112 combo gives something back to the modern guitar player that for too many years has been overlooked. In a world obsessed by pre-amp distortion, the dark art of power amp distortion has been lost – until now. The GH30R-112 delivers transparent, versatile classic rock tones with the ability to blend in the dynamic characteristic of pre-amp distortion and power amp distortion right there at your fingertips.

Loaded with a specially chosen Celestion V-Type driver the GH30R-112 delivers an impressive stage presence for such a compact combo. Both channels on the GH30R-112 produce the same tonal characteristic but how you set them up gives you the subtle difference that tone hounds dream about.

The IRT-Studio-SE offers the same classic tones as the big Ironheart amps, but in a low-power, compact, and lightweight design. Equipped with ECC83 Preamp valves and EL84 output valves, the IRT-Studio amp delivers 15W of pure tonal power, with the option to switch to less than 1W via the second input for times when loud volumes aren’t permitted. Even with is compact design, the amp head still offers 3 channels and a wide range of control to dial in the perfect tone for any situation. Its 3 band EQ features push/pull EQ shift functions, extended the frequency ranges for further tone shaping, while the dynamics, tone, and reverb controls allow players to give their sound a personal touch.

Along with its incredible tonal capabilities, the Ironheart Studio features a variety of ins/outs to seamlessly integrate into existing rigs. Its D.I. output is perfect for directly connecting the amp head to DAWs, PAs, and mixing consoles, and features a high-quality speaker emulator to deliver all valve tones to your DAW or PA, or even both at the same time. The amp is also equipped with an internal dummy load, removing the need to connect an external speaker and deliver a truly silent recording. The FX loop is idea for connecting your favourite stompboxes, and the Aux in is perfect for playing along to backing tracks and songs.

The Laney IRT15H-2 15W tube guitar amp head delivers a single Ironheart channel that's flavored with 12AX7 (preamp) and EL84 (power amp) tubes. For when 15W is too much, there's also a 1W guitar input. Other features include high-quality digital reverb, an FX loop with variable level control and a DI output.

The IRT412 custom-designed straight guitar cabinet is constructed from rugged plywood and loaded with 4 Custom 12” HH drivers handling 320 watts. Laney Amplification began in 1967 when Lyndon Laney, whilst playing in a local band, 'The Band of Joy' with John Bonham on drums and Robert Plant on vocals, turned his musical interest into amplifier construction. Initially working in his father’s garage. Lyndon Laney sought to design and build amplifiers with key 'tonal' characteristics that were unheard of at the time. Formed in 1967 by Lyndon Laney, Laney Amplification is a West Midlands based guitar and musical instrument amplifier manufacturer who were closely involved with Tony Iommi of Black Sabbath in the birth of the ‘Heavy Metal’ music genre. Since 1967, Laney Amplification has gone on from strength to strength and is now a multinational.

Designed and engineered in the Black Country, Great Britain, the Ironheart IRT412 is a standard-sized, straight guitar cabinet loaded with 4 x 12” HH drivers designed to deliver punch and clarity when used with any amplifier.

Constructed from rugged plywood the IRT412 is finished with black metal corners, black textured front fret, black basket weave Tolex, steel castors and comfortable side mounted bar handles the IRT412 cabinet is designed to survive a life on the road for years to come.

Lionheart represents everything we've learned through forty years of Laney tube heritage, distilled into a single ampilfier range. Designed to deliver the ultimate tone of a tube being pushed hard - warm and expressive, at an output level which can be used in everyday environments.

This twin channel, all tube amplifier features 'Parallel single-ended' Class A output from 4x EL84 matched tubes, providing 20 watts of rich tube power.

The L20H also features gold plated PCB's and jack sockets. Sealed gold contact relays are used in all signal paths for minimum sound coloration, and the amp comes fitted with the renowned "Type 4" large spring line reverb for the classic guitar reverb sound.

Each L20H features a hand stamped 'build number' in the order they come off the Laney production line, and comes with a custom made 'Lionheart' dust cover.

The Lionheart L50H's BITE control tightens up the bottom end giving a clean and clear punchy sound, whilst the tone control works in a similar fashion to the Tone controls on your guitar except that it works uniquely on the other end of the amplification chain. Giving you the ability to control not only the overall top end response but also reduce the upper end harmonics on the output stage and preamplifier overdrive sounds.
The Dynamics control allows you to control the Lionhearts low frequency response dialling clockwise gives a more extended low-end response. Dialling the Dynamics control counterclockwise tightens up the low-end response.

The L50H rear panel features an FX loop with Bypass/Insert/Side Chain operation modes with a level control, the footswitch socket as well as housing the Preamp Out/Power amp in sockets along with the speaker connections for 8 & 16 Ohm cabinets.
Each Lionheart L50H features a hand stamped "build number" in the order they came of the production line. Designed and manufactured in the UK.

The L5T-112 is a 5 watt Single-Ended, Class 'A' tube combo loaded with a 12" Celestion G12H 70th Anniversary driver to give the ultimate boutique guitar tone. Play through a Lionheart – it reacts to your touch. From the moment you strike a note you’re connected. Let the music flow through you – from your fingers to the guitar, through the amplifier to the beating heart of the speaker. You are one. You are Lionheart.

The L5T-112 features a chrome twin channel pre amp with a Bright switch, shared 3-band EQ, global Tone and Studio-quality Digital Reverb. Constructed from Marine Grade Plywood with retro banding strip and leather strap handle, the L5T-112 looks as good as it sounds.

Designed and engineered with pride in Great Britain, The Lionheart L5T-112 is a 5 watt, Single-Ended, Class ‘A’ guitar combo loaded with a 1 × 12 Celestion G12H 70th Anniversary driver, all designed to give the ultimate guitar tone.

With less of a emphasis on preamp distortion, with the L5T-112 you can hear and feel the power tubes clipping to breakup, giving a much richer harmonic content and a larger dynamic range. With the L5T-112 you can really feel and hear the differences in tone based on your picking technique.

The LA15C is a compact, plug and play practice amplifier designed specifically for acoustic instruments. Designed and engineered in Great Britiain, LA acoustic amplifiers are built to deliver natural sound reproduction for acoustic instruments. The preamplifer, power stage and speaker components and all carefully developed and tested to deliver quality tone combined with functionality and portability.The LA15 is a simple-to-use and compact amplifier combo designed specifically for acoustic instruments such as electro-acoustic guitars. It delivers pure acoustic tone with ease.LA15’s instrument channel features a 3 band EQ for tone shaping plus a Shape switch – this provides a great sounding “go to” setting from a single button press.A pre-selected chorus setting can be added with a simple switch. This adds richness and thickness to the original acoustic sound.The mini-jack AUX input, allows for connection of a playback device such as MP3/ipod/CD for jamming along to songs or backing tracks, plus there is a headphone socket for doing so quietly –a great feature for private practice or late night sessions. The LA15’s 15W RMS power stage is coupled to a pair of custom-designed 5” woofers giving broad sound dispersion and impressive output level.

The LA20C produces 20W RMS through a custom designed 8" driver fitted with a co-axial tweeter for pure acoustic brilliance. It's single-channel preamp features a single input, Lo, Parametric Mid & Hi EQ for accurate tonal shaping, a switchable chorus and an on-board reverb. It features an aux. input and a DI out, allowing for the option of plugging into larger PA venues for crystal-clear acoustic sound, whatever the volume. Another great feature of the LA20C is the anti-feedback circuitry eliminating the chances of acoustic feedback when in use.

The LG20R takes its tonal cues from its bigger tube brothers. The clean channel chimes away nicely and takes on a pleasant bite at higher volumes. Switch to the drive channel, set the drive and the master controls as desired, and the LG range will yield a range of tones, from just breaking up to saturated sustain, with an increasing degree of crunch and raunch in between. On both channels the three band tone controls contribute a subtle degree of shaping rather than creating extreme sounds.

The LG35R delivers 35 watts and features a pre-amp with clean and crunch sounds, shared 3 band EQ, REVERB and an AUX input - Perfect for practice! The LG35R takes its tonal cues from its bigger tube brothers. From clean chimes to full on rock and everything in between.

The L35R's Aux input socket makes jamming and learning new songs a blast and the on-board reverb provides a nice natural splash of colour to your overall sound. Perfect for the bedroom, rehearsal, and also great for recording.

On-board studio quality reverb. Reverb gives you a sense of the space that you are in. A dry guitar signal can sound a little dull. Adding the right about of reverb provides the guitar signal with ambience and brings it to life.