Compare“Crown XLC 2500 W-O DSP Two-Channel 500W Power Amplifier” has been added to the compare list
“Crown XLC 2500 W-O DSP Two-Channel 500W Power Amplifier” was added to the compare list
-
The MicTube raises the level of any mic up to line level, adding as much or as little of the tube signature sound as you like. You find a -20 dB pad switch for mics with hotter outputs or louder sound sources. Phase reverse switches help you optimize multi-mic setups, and of course, the MicTube Duo provides +48 volt phantom power for condenser microphones.
-
Add warm, vintage tone to any mic or instrument with the Alesis MicTube Solo preamplifier. Ideal for any recording or live setup, the Alesis MicTube Solo features an easy-to-use control layout and one of the most classic sounding, lowest-noise vacuum tubes: the legendary 12AX7. Aside from the tube, the Alesis MicTube Solo features a minimized circuit path, so it preserves the essence of the signal coming from the microphone faithfully.
-
The AMB1200 is a 2RU class AB stereo power amplifier delivering 1200W into mono, stereo or bridged outputs. The AMB1200 features individual front panel volume control, level meter, clip and protection indicators.
-
The AMB1600 is a 2RU class AB stereo power amplifier delivering 1600W into mono, stereo or bridged outputs. The AMB1600 features individual front panel volume control, level meter, clip and protection indicators.
AED 4,365.00 Exc VAT
-
The AMB600 is a 2RU class AB stereo power amplifier delivering 600W into mono, stereo or bridged outputs. The AMB600 features individual front panel volume control, level meter, clip and protection indicators.
AED 2,740.00 Exc VAT
-
With an impressive 12 inputs the Australian Monitor AMD200 will give installers untold flexibility in a 1 RU mixer amplifier. Featuring 8 balanced Mic/Line level inputs each with 34V DC phantom power available and 4 dual RCA program source inputs and delivering 200 watts at 100 volt, 70 volt, 8 ohm and 4 ohm. With on board tones (Bell, Pre-Announce, Alert and Evac), remote master VCA, Vox triggered output (assignable to any one or combination of mic/line ins), 24DVC back up power input and low power contact closure, the Australian Monitor AMD200 has all the features of the smaller AMD100 compact class D amplifier.
AED 4,750.00 Exc VAT
-
The Australian Monitor ES Series is the latest evolution of our Essentials series of Mixer Amplifiers, now featuring 2 channels of priority VOX muting, integrated tone generator (120/250 models) and a modern look and finish. The ES mixer amplifiers maintain the core features you expect including four XLR mic/dual RCA line inputs, record and line outputs, low impedance or constant voltage outputs and 12V phantom power.
AED 1,800.00 Exc VAT
-
The ES120P power amplifier delivers 120 watts at 100 volt or 4 ohm in a 2 RU package. The ES series booster amplifiers give the audio contractor a reliable, low cost booster amplifier for applications that are price sensitive but still require high quality commercial sound reinforcement.
AED 1,600.00 Exc VAT
-
The ES2120P power amplifier delivers 120 watts per channel at 100 volt or 4 ohm in a 2 RU package. The ES series booster amplifiers give the audio contractor a reliable, low cost booster amplifier for applications that are price sensitive but still require high quality commercial sound reinforcement.
AED 2,740.00 Exc VAT
-
The Australian Monitor ES Series is the latest evolution of our Essentials series of Mixer Amplifiers, now featuring 2 channels of priority VOX muting, integrated tone generator (120/250 models) and a modern look and finish. The ES mixer amplifiers maintain the core features you expect including four XLR mic/dual RCA line inputs, record and line outputs, low impedance or constant voltage outputs and 12V phantom power.
AED 2,460.00 Exc VAT
-
The ES250P power amplifier delivers 250 watts at 100 volt or 4 ohm in a 2 RU package. The ES series booster amplifiers give the audio contractor a reliable, low cost booster amplifier for applications that are price sensitive but still require high quality commercial sound reinforcement.
AED 2,351.00 Exc VAT
-
The ES480P power amplifier delivers 80 watts per channel at 100 volt or 4 ohm in a 2 RU package. The ES series booster amplifiers give the audio contractor a reliable, low cost booster amplifier for applications that are price sensitive but still require high quality commercial sound reinforcement.
AED 4,170.00 Exc VAT
-
The ES500P power amplifier delivers 500 watts at 100 volt or 4 ohm in a 2 RU package. The ES series booster amplifiers give the audio contractor a reliable, low cost booster amplifier for applications that are price sensitive but still require high quality commercial sound reinforcement.
AED 4,080.00 Exc VAT
-
The HS series is Australian Monitor’s next generation of Class D mixer amplifiers, delivering high quality audio reinforcement with the power you need – 60, 120 and 250 watt options, all in a one rack unit package. Our new amplifiers are fully featured, offering 7 external and 2 internal audio input channels, each channel offering individual channel volume control, equalizer and gain control. An inbuilt user-customizable tone generator, MP3 player, Bluetooth® module, 3.5mm jack and USB charger are included as standard in all models.
AED 3,125.00 Exc VAT
-
The HSP series is Australian Monitor's next generation of controllable Class D power amplifiers, delivering high quality audio reinforcement with the power you need in the following options -Single channel 120W or 250W, Dual channel 120W or 250W and Quad channel 120W or 250W. Our new power amplifiers are fully featured, including an efficient Class D amplifier, USB and RS232 control and a mini DSP featuring volume control, mute, compressor/limiter, filter and input channel selection.
AED 2,460.00 Exc VAT
-
The HSP series is Australian Monitor's next generation of controllable Class D power amplifiers, delivering high quality audio reinforcement with the power you need in the following options -Single channel 120W or 250W, Dual channel 120W or 250W and Quad channel 120W or 250W. Our new power amplifiers are fully featured, including an efficient Class D amplifier, USB and RS232 control and a mini DSP featuring volume control, mute, compressor/limiter, filter and input channel selection.
AED 3,990.00 Exc VAT
-
The HSP series is Australian Monitor's next generation of controllable Class D power amplifiers, delivering high quality audio reinforcement with the power you need in the following options -Single channel 120W or 250W, Dual channel 120W or 250W and Quad channel 120W or 250W. Our new power amplifiers are fully featured, including an efficient Class D amplifier, USB and RS232 control and a mini DSP featuring volume control, mute, compressor/limiter, filter and input channel selection.
AED 4,930.00 Exc VAT
-
The HSP series is Australian Monitor's next generation of controllable Class D power amplifiers, delivering high quality audio reinforcement with the power you need in the following options -Single channel 120W or 250W, Dual channel 120W or 250W and Quad channel 120W or 250W. Our new power amplifiers are fully featured, including an efficient Class D amplifier, USB and RS232 control and a mini DSP featuring volume control, mute, compressor/limiter, filter and input channel selection.
AED 4,930.00 Exc VAT
-
The HS series is Australian Monitor’s next generation of Class D mixer amplifiers, delivering high quality audio reinforcement with the power you need – 60, 120 and 250 watt options, all in a one rack unit package. Our new amplifiers are fully featured, offering 7 external and 2 internal audio input channels, each channel offering individual channel volume control, equalizer and gain control. An inbuilt user-customizable tone generator, MP3 player, Bluetooth® module, 3.5mm jack and USB charger are included as standard in all models.
AED 3,985.00 Exc VAT
-
The HSP series is Australian Monitor's next generation of controllable Class D power amplifiers, delivering high quality audio reinforcement with the power you need in the following options -Single channel 120W or 250W, Dual channel 120W or 250W and Quad channel 120W or 250W. Our new power amplifiers are fully featured, including an efficient Class D amplifier, USB and RS232 control and a mini DSP featuring volume control, mute, compressor/limiter, filter and input channel selection.
AED 3,700.00 Exc VAT
-
The HSP series is Australian Monitor's next generation of controllable Class D power amplifiers, delivering high quality audio reinforcement with the power you need in the following options -Single channel 120W or 250W, Dual channel 120W or 250W and Quad channel 120W or 250W. Our new power amplifiers are fully featured, including an efficient Class D amplifier, USB and RS232 control and a mini DSP featuring volume control, mute, compressor/limiter, filter and input channel selection.
AED 6,270.00 Exc VAT
-
The HSP series is Australian Monitor's next generation of controllable Class D power amplifiers, delivering high quality audio reinforcement with the power you need in the following options -Single channel 120W or 250W, Dual channel 120W or 250W and Quad channel 120W or 250W. Our new power amplifiers are fully featured, including an efficient Class D amplifier, USB and RS232 control and a mini DSP featuring volume control, mute, compressor/limiter, filter and input channel selection.
-
The HS series is Australian Monitor’s next generation of Class D mixer amplifiers, delivering high quality audio reinforcement with the power you need – 60, 120 and 250 watt options, all in a one rack unit package. Our new amplifiers are fully featured, offering 7 external and 2 internal audio input channels, each channel offering individual channel volume control, equalizer and gain control. An inbuilt user-customizable tone generator, MP3 player, Bluetooth® module, 3.5mm jack and USB charger are included as standard in all models.
AED 2,840.00 Exc VAT
-
The Australian Monitor Synergy Series SY800V offers contractors a host of practical features and delivers 400 watts @ 100V of power per channel in a space-saving high performance package.
AED 4,460.00 Exc VAT
-
The Reference Amplifier A500 is the ideal choice for home and professional recording studios, post-production suites, or anyone seeking audiophile-grade performance – without the audiophile-grade price tag! A professional 600-Watt ultra-linear power amplifier, the A500 provides of stunningly-accurate audio reproduction – without the slightest hint of distortion or artificial coloration common to many competing products. Thanks to its ingenious servo-controlled design, and the high-level components used throughout, the A500 boasts remarkable specs and unrivaled sonic performance.
AED 1,080.00 Exc VAT
-
The Reference Amplifier A800 is the ideal choice for home and professional recording studios, post-production suites, or anyone seeking audiophile-grade performance – without the audiophile-grade price tag! A professional 800-Watt ultra-linear power amplifier, the A800 provides stunningly-accurate audio reproduction – without the slightest hint of distortion or artificial coloration common to many competing products. Thanks to its ingenious servo-controlled design, and the high-level components used throughout, the A800 boasts remarkable specs and unrivaled sonic performance.
AED 1,648.00 Exc VAT
-
The 180-Watt ACX1800 features two channels: one with a single 1/4" input jack and a second with a 1/4" input and XLR input, making it the ideal amp for a one-person show with an acoustic guitar and a mic for vocals. Just turn the GAIN dial to determine the levels of each channel.
On the back panel, you will find a stereo RCA input for plugging in a CD player. If you're just getting started as a guitarist, this is a great way to play along with your favorite tunes. Or, if you're playing an extended set, you can use the CD IN section to provide music during breaks. Two XLR LINE OUT jacks send a signal directly to a mixing board, and you can connect an external effects processor via the 1/4" INST INS SEND and RETURN jacks.
AED 1,040.00 Exc VAT
-
The 45-Watt ACX450 features two channels: one with a single 1/ 4" input jack and a second with a 1/4" input and XLR input, making it the ideal amp for a one-person show with an acoustic guitar and a mic for vocals. Just turn the GAIN dial to determine the levels of each channel. Both channels feature a four-band EQ equipped with BEHRINGER's FBQ Feedback Detection System for instant feedback elimination. You also get a 24-bit FX processor per channel featuring 16 incredibly presets such as reverb and delay. We also include a footswitch for remote activation of the effects.
-
Behringer's ACX900 90-Watt, 2-Channel Acoustic Amplifier comes with two 8-inch dual-cone BUGERA speakers, which provide true acoustic fidelity. You can produce the exact sound you are looking for with the two independent FX processors and the 7-band graphic EQ for each channel. The revolutionary FBQ Feedback Detection system helps you detect and correct feedback quickly. In addition, the ACX900 has a dedicated tuner switch for each channel that can be used with an external tuner. It also has FX inserts and a balanced stereo XLR line out with a ground lift switch to enable a direct connection to your mixing console. It also comes with the FS112 dual footswitch and a one year warranty.
-
Receive free over-the-air (OTA) HD broadcasts with the ANTOP Antennas AT-108 Indoor HDTV Antenna. It features a multidirectional design, so there's no need to point the antenna for signal strength. Once installed, it has an operation range of up to 30 miles.
- Slim 0.03" profile
- For use in strong signal areas
- Can be installed on a wall or window
-
Featuring comprehensive digital signal processing (DSP) and remote setup via Ethernet / USB in a 2U rack-mountable, fan-cooled chassis, the AX6240Z 900W 70/100V High-Impedance Power Amplifier from Behringer is a professional, high-performance, 2-channel power amplifier for installation with 70 / 100V distributed speaker systems. This system delivers up to 700W RMS per channel at 70V (7?), up to 1000W RMS per channel at 100V (10?), up to 350W RMS per channel at 70V (14?), and up to 500W RMS per channel at 100V (20?). It utilizes transformer-less, class-D topology and switch-mode power technology to provide low noise and good transient response while reducing amplifier energy costs. The dual variable-speed fans create back-to-front ventilation to keep racks running cool, and zero-attack limiters combine with independent DC and thermal overload protection to safeguard the amplifiers and connected speaker systems. Featuring 24-bit / 96 kHz converters to ensure signal integrity, the processing section of this AX6240Z amplifier maintains an broad dynamic range while offering sophisticated DSP options including delay, crossover, dynamics, and both parametric (8-band) and dynamic (2-band) EQ.
AED 2,880.00 Exc VAT
-
Get punchy, dynamic tone in a tiny package with the TC Electronic BAM200, a Class-D powered amplifier head for bass guitars. This amp gives you 200W of power handling into 4-Ohm cabinets.
The amp was designed with a high-voltage MOSFET preamp to give you a warm tone, one that approximates a tube amp in a solid-state design. Gain, Bass, Middle, Treble, and Master Volume knobs are provided to shape your tone.
On the rear of the amp, you'll notice a 1/4" speaker output and an XLR DI output useful for sending a signal straight to the house or recording interface. A built-in studio-quality headphone amp lets you practice silently through the BAM200 whenever you need.
-
The TC Electronic BC208 is a bass cabinet designed to handle 200W at 8 Ohms. It offers 2 x 8" custom drivers that give you a deep, resonant bass tone. Its design is vertical, and it can be stacked with other cabinets from TC Electronics to create large bass-cab systems. On its own, however, this cabinet is quite portable, being relatively lightweight at 22 lb.
The cabinet sports two 1/4" input connections on the rear. Its fashioned out of plywood to give you a rugged, roadworthy experience, and offers a heavy-duty metal grille. The sound it offers is powerful, with hefty low-end punch, and is quite suitable for small venues, menu venues, and rehearsal spaces.
-
The BG-1120, part of the BG-M series of mixer/amplifiers from TOA Electronics, is a high-quality, compact unit ideal for paging, background music, and on-hold applications in schools, hospitals, restaurants, offices, and other similar venues. It has microphone, telephone, program, and aux inputs, as well as an input module slot, which accepts TOA 900 Series connector modules so that you can customize the BG-1120 to meet your needs. Outputs include balanced screw terminals for 4 ohm, 25V and 70V, as well as a line-level music-on-hold output and a 1W output for an 8 ohm speaker zone.
-
The Behringer Ultrabass BVT4500H Bass Amplifier Head is a powerhouse bass head that features tube emulation, a nine-band graphic equalizer, a built-in limiter, an effects loop, and the inputs and outputs pro bassists need.
Designed to give you a classic vintage bass tone with enough headroom to pump it up to club levels when needed, the BVT4500H is an extremely versatile bass head with the power you need and then some.
AED 1,296.00 Exc VAT
-
The Behringer Ultrabass BVT5500H Bass Amplifier Head is a powerhouse bass head that's built to take on gigs large and small. Its rich feature set includes 550 watts of stage-shaking power, a nine-band grahic EQ, built-in limiter and overdrive, Behringer's exclusive Virtual Tube Circuitry, and the extensive connectivity pros demand. Additionally, the Voicing selector lets you quickly choose one of five frequency-biased settings that change the overall timbre of the amp from mid-scooped (for pop-n-slap definiton) to bass emphasis (for a warm and tubby tone).
Additional value-adding details include a ground lift switch, a dedicated tuner output, an effects loop (with front-panel mix knob), and dual inputs (one for full gain input, one for a -15dB padded input). The BVT5500H has the flexibility and power to take on your next performance, wherever it is.
AED 1,360.00 Exc VAT
-
The BX108 Thunderbird 15W Bass Practice Combo is perfect for budding artists to create, jam and practice. The Thunderbird has retro styling but modern features such as stereo inputs and outputs. The custom 8" speaker is powered by 15W with a 3-band EQ and level control.
Stereo inputs and outputs for direct recording and jamming
Phones out plug for quiet practice
Vintage retro look with burgundy top panel, black covering and leather handle
-
Behringer's BX1800 is a truly affordable 180W bass combo with a 15" high-impact cone speaker and a custom-made horn tweeter for high-end clarity. For tube sound it features Behringer's unique VTC Virtual Tube Circuitry. Shape your tone with the 4-band EQ and mid-shape function, while the integrated musical opto-limiter ensures ultimate volume without distortion. The connectivity options include a balanced XLR DI output, an FX Insert for external effects devices and a separate headphone output. An additional CD input lets you play along with your favorite music.
-
Behringer's Ultrabass BX4500H 450-Watt Bass Amplifier Head comes equipped with a 5-band EQ with Shaper, Deep and Bright functions to help you to shape your sound. There is a vintage-style VU meter so you can precisely monitor your signal level. On board is Behringer's unique technology, the Dynamizer that helps give you the ultimate punch. A switchable Ultrabass subharmonics processor creates stunning low-end power.
In addition, the BX4410H allows you to expand your sound with FX inserts for external effects devices. There is also a balanced stereo XLR line out with a ground/lift switch, which enables a direct connection to your mixing console. Included is a dual footswitch that allows you to control Ultrabass and Shape functions.
-
The Ultrabass BXD15 700W 1x15" Bass Combo Amplifier from Bugera is a Class D combo bass amplifier capable of up to 700 watts of output power. It features A 15-inch speaker and employs Bugera's Dynamizer technology to provide parallel-style compression to your playing to help control your dynamics. The BXD15 has an FX loop that allows you to integrate stompbox or rack effects into the rig. Additionally, the amp has a switchable tuner output that can also serve as a live monitor feed. The amp can be used both live and in the studio, thanks to its balanced DI XLR output.
-
The Ultrabass BXD15A 700W 1x15" Bass Combo Amplifier from Bugera is a Class D combo bass amplifier capable of up to 700 watts of output power. It features a 15-inch aluminum-cone speaker, and employs Bugera's Dynamizer technology to provide parallel-style compression to your playing to help control your dynamics. The BXD15A has an FX loop that allows you to integrate stompbox or rack effects into the rig. Additionally, the amp has a switchable tuner output that can also serve as a live monitor feed. The amp can be used both live and in the studio, thanks to its balanced DI XLR output.
-
Behringer's Ultrabass BXL1800 180 Watt 2-Channel Bass Workstation comes with a 12" Classic Tone Series BUGERA speaker and a Compressor function that helps to smooth out volume peaks. The 7-band EQ with a frequency indicator helps you shape your sound. You can clarify or distort your sound with dedicated channel Gain, Shape and Level controllers. On board is Behringer's unique technology, the Dynamizer that helps give you the ultimate punch. A switchable Ultrabass subharmonics processor creates stunning low-end power.
In addition, the BXL1800 allows you to expand your sound with FX inserts for external effects devices. There is also a balanced stereo XLR line out with a ground/lift switch, that enables a direct connection to your mixing console. Included is a dual footswitch that lets you select Ultrabass and Shape functions.
AED 1,280.00 Exc VAT
-
Behringer's Ultrabass BXL1800A 180-Watt 2-Channel Bass Workstation comes with a 12" Hard Attack Aluminum Series BUGERA speaker and a Compressor function that helps to smooth out volume peaks. The 7-band EQ with a frequency indicator helps you to shape your sound. You can clarify or distort your sound with dedicated channel Gain, Shape and Level controllers. On board is Behringer's unique technology, the Dynamizer that helps give you the ultimate punch. A switchable Ultrabass subharmonics processor creates stunning low-end power.
In addition, the BXL1800A allows you to expand your sound with FX inserts for external effects devices. There is also a balanced stereo XLR line out with a ground/lift switch, which enables a direct connection to your mixing console. Included is a dual footswitch that lets you select Ultrabass and Shape functions.
-
Behringer's Ultrabass BXL3000 300 Watt 2-Channel Bass Workstation comes with a 15" Classic Tone Series BUGERA speaker and a Compressor function that helps smooth out volume peaks. The 7-band EQ with a frequency indicator helps you shape your sound. You can clarify or distort your sound with dedicated channel Gain, Shape and Level controllers. On board is Behringer's unique technology, the Dynamizer that helps give you the ultimate punch. A switchable Ultrabass subharmonics processor creates stunning low-end power.
In addition, the BXL3000 allows you to expand your sound with FX inserts for external effects devices. There is also a balanced stereo XLR line out with a ground/lift switch, which enables a direct connection to your mixing console. Included is a dual footswitch that lets you select Ultrabass and Shape functions.
-
Behringer's Ultrabass BXL450A 45 Watt 2-Channel Bass Workstation comes with a 10" Hard Attack Series BUGERA speaker and a 5-band EQ with a frequency indicator to help you to shape your sound. You can clarify or distort your sound with dedicated channel Gain, Shape and Level controllers.
-
The EP2000 has become one of the best-selling power amps in the industry. Our proprietary Accelerated Transient Response (ATR) Technology gives the EP2000 the massive power reserves needed for deep and impactful bass response, which translates into a more natural sound quality that will bring your audience to its feet – and keep them there! With an amazing 2,000-Watts of output power (2 x 1,000 Watts @ 2 Ohms; 2 x 750 Watts @ 4 Ohms; 2,000 Watts @ 4 Ohms in Bridge mode), the EP2000 is the perfect amplifier for medium- sized club gigs, mobile PA systems, church services or public spaces.
AED 1,776.00 Exc VAT
-
The EP4000 builds on the incredible legacy of our EP2500, which is one of the best-selling power amps in the industry. Our proprietary Accelerated Transient Response (ATR) Technology gives the EP4000 the massive power reserves needed for deep and impactful bass response, which translates into a more natural sound quality that will bring your audience to its feet – and keep them there! With an amazing 4,000-Watts of output power (2 x 2,000 Watts @ 2 Ohms; 2 x 1,400 Watts @ 4 Ohms; 4,000 Watts @ 4 Ohms in Bridge mode), the EP4000 is the perfect amplifier for medium-sized club gigs, mobile PA systems, church services or public spaces.
AED 2,251.20 Exc VAT
-
The remarkable 4-channel EPQ304 packs a heart-stopping 300 Watts of output power into an exceptionally lightweight (8.8 lbs/4.0 kg) package, thanks to our Accelerated Transient Response (ATR) technology. Ample power (4 x 75 Watts @ 4 Ohms; 4 x 50 Watts @ 8 Ohms) and high-tech efficiency combine, giving you a feather-light, supercharged workhorse that will keep your rig kicking for years and years to come.
AED 1,040.00 Exc VAT
No products in the cart. 